String dump of section '.rodata': [ 2] Reference platform resetting ... [ 24] |/-\ FASTPATH starting... [ 44] fp_main_task [ 54] Stack pointer before signal: 0x%08lX [ 7c] Offending instruction at address 0x%08lX [ a8] tried to access address 0x%08lX [ cc] CPU's exception-cause code: 0x%08lX [ f4] ----------------------Stack Depth %lu [ 11c] At code addr 0x%08lX the code 0x%08lX alters SP, [ 150] but had not yet found frame size. Giving up. [ 180] At code addr 0x%08lX found function epilog code 0x%08lX [ 1bc] but had not yet found prolog code. Giving up. [ 1ec] This might mean I hit the top of stack. [ 218] Found prolog at code addr 0x%08lX, but had seen epilog of different frame size %d on the way. Giving up. [ 284] At code addr 0x%08lX found code 0x%08lX that stores [ 2bc] RA at negative offset to SP. Giving up. [ 2e8] Current frame at 0x%08lX, size %d bytes, retaddr offset %d bytes [ 32c] Return address: 0x%08lX [ 348] Stack frame dump: [ 35d] %08lX: [ 368] %08lX [ 370] That return address doesn't look like userspace code-space. continue anyway [ 3c0] %s [ 3c5] ************************************************************ [ 404] * Start LVL7 Stack Information * [ 444] ************************************************************ [ 484] pid: %d [ 494] TID: %d [ 4a4] Task Name: %s [ 4b4] si_signo: %d [ 4c4] si_code: %d [ 4d6] ************************************************************ [ 514] * End LVL7 Stack Information * [ 554] unknown! [ 561] LVL7 SIGSEGV Handler [ 578] Warning!!! an error occured while handling a SIGSEGV [ 5b0] Note: The most likely cause of this error was stack corruption [ 5f4] in or about the last stackframe in the file. [ 624] Attempting exception... [ 640] Attempt finished. [ 654] Segfault Backtrace Debug Function [ 678] Return address from me = 0x%08lX [ 69c] My stack pointer = 0x%08lX [ 6b8] About to segfault... [ 6d0] Should not have gotten to this printf statement. [ 704] P.1.6 [ 70c] Tue Jun 16 08:07:27 EDT 2009 [ 72c] SmartPATH software Version %s Build Date: %s [ 75c] Starting fpmain [ 770] Configurator did not initialized... Exiting [ 7a0] Configurator: Applications could not be started... Exiting [ 7e1] started! [ 7ec] ../../../bsp/cpu/common/ecos/ipl/bootos.c [ 818] clearConfig [ 824] saveconfig [ 830] setdhcp [ 838] configDump [ 844] hapiBroadDebugPkt [ 858] logClear [ 864] logConsole [ 870] logShow [ 878] mbufShow [ 884] memShow [ 88c] osapiTaskShow [ 89c] reboot [ 8a4] ifconfig [ 8b0] taskShow [ 8bc] ecos_net_stats [ 8cc] dev [ 8d0] netsnmpDebug [ 8e0] flashErase [ 8ec] copy [ 8f4] loopback_ext [ 904] eeprom_set_mac [ 914] eeprom_set_hwver [ 928] eeprom_set_serial [ 93c] ssltShowGlobals [ 94c] ssltConfigDataTestShow [ 964] ssltDebugLevelSet [ 978] port_phy_dump [ 988] port_phy_set [ 998] detectHPSFP [ 9a4] httpd_close_connections [ 9bc] showConnections [ 9cc] emwebWarnSet [ 9dc] Invalid [ 9e4] Arp [ 9e8] Bpdu [ 9f0] Broadcast [ 9fc] ClassBasedMove [ a0c] ClassTagPackets [ a1c] Control [ a24] CpuLearn [ a30] DestLookupFail [ a40] Dhcp [ a48] DosAttack [ a54] E2eHolIbp [ a60] EncapHiGigError [ a70] FilterMatch [ a7c] GreChecksum [ a88] GreSourceRoute [ a98] HigigControl [ aa8] HigigHdrError [ ab8] IcmpRedirect [ ac8] Igmp [ ad0] IngressFilter [ ae0] Ip [ ae4] IpfixRateViolation [ af8] IpMcastMiss [ b04] IpOptionVersion [ b14] Ipmc [ b1c] IpmcRsvd [ b28] L2Cpu [ b30] L2DestMiss [ b3c] L2LearnLimit [ b4c] L2Move [ b54] L2MtuFail [ b60] L2NonUnicastMiss [ b74] L2SourceMiss [ b84] L3AddrBindFail [ b94] L3DestMiss [ ba0] L3HeaderError [ bb0] L3MtuFail [ bbc] L3Slowpath [ bc8] L3SourceMiss [ bd8] L3SourceMove [ be8] MartianAddr [ bf4] McastIdxError [ c04] McastMiss [ c10] MimServiceError [ c20] MplsCtrlWordError [ c34] MplsError [ c40] MplsInvalidAction [ c54] MplsInvalidPayload [ c68] MplsLabelMiss [ c78] MplsSequenceNumber [ c8c] MplsTtl [ c94] Multicast [ ca0] Nhop [ ca8] OamError [ cb4] OamSlowPath [ cc0] OamLMDM [ cc8] ParityError [ cd4] Protocol [ ce0] SampleDest [ cec] SampleSource [ cfc] SharedVlanMismatch [ d10] SourceRoute [ d1c] TimeStamp [ d28] Ttl [ d2c] Ttl1 [ d34] TunnelError [ d40] UdpChecksum [ d4c] UnknownVlan [ d58] UrpfFail [ d64] VcLabelMiss [ d70] VlanFilterMatch [ d80] WlanClientError [ d90] WlanSlowPath [ da0] WlanDot1xDrop [ db0] ExceptionFlood [ dc0] Timesync [ dcc] EavData [ dd4] SamePortBridge [ de4] SplitHorizon [ df4] L4Error [ dfc] Stp [ e15] [ e1d] ! [ e28] =================== [ e40] %04x [ e48] %2.2x [ e54] hapiTxBpduQ [ e60] hapiBpduTxTask [ e70] ../../../../andl/hapi/esw/base/base/broad_cpu_intf.c [ ea8] hapiRxQueue [ eb4] hapiRxTask [ ecc] hapiBuf [ ed4] %s %d: In %s unsupported connection type [ f00] hapiBroadSend [ f10] Sending packet to %d.%d.%d with frameType %d [ f40] %s %d: In %s packet too big [ f60] %s %d: In %s - sal_dma_alloc failed. [ f8d] [ f95] ! [ fad] D [ fb1] C [ fc4] --> DOT1X PORT UNAUTH MODE [ fe4] DISABLE [ fec] --> Voice VLAN UnauthMode:[%s] [ 1010] --> CDP Pkt Received on port[%d] [ 1034] --> unit:[%d] src_port:[%d] dest_port[%d] [ 1060] --> rx_unit:[%d] rx_port:[%d] rx_reason:[%d] [ 1090] --> LLDP Pkt Received on port[%d] [ 10b4] --> DHCP Pkt Received on port[%d] [ 10d8] ENABLE [ 10e0] hapiBroadReceive: Invalid USP (%d.%d.%d) [ 110c] hapiBroadModidModportToLportGet: failed to uport/lport (%d / %d) [ 1150] >Received pkt on unit %d, port %d, src_port %d src_trunk %d flags 0x%x, src_mod %d [ 11a4] hapiBroadReceive() -> Pkt received: [ 11cc] %02x [ 11d8] hapiRxQueueLostMsgs == %d [ 11f4] COS Stats in Receive Task [ 1210] COS[%d] Received %10u Dropped %10u [ 1238] Packets delivered to Application = %10u [ 1264] Packets Dropped on HAPI Receive Task = %10u [ 1294] FrameType %d Dropped %10u [ 12b0] Invalid USP unit = %d, slot = %d, port = %d.A port was not able to be translated correctly during the receive. [ 1320] Passing packet to application [ 1344] %s %d: In %s call to 'dapiCallback' [ 136c] hapiBroadReceiveTask [ 1384] Unkown Board Family 0x%x in Receive. Dropping the frame!!! [ 13c0] Unkown Board Family 0x%x in Receive [ 13e8] Received packet on port %d.%d.%d, COS %d [ 1414] Reasons: [ 1420] %s [ 142c] Comparing SA to %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x [ 146c] Discard [ 1478] %s %d: In %s packet is too big [ 1498] hapiBroadReceivePdu [ 14ac] %s(): acceptLLDPDU is FALSE [ 14cc] %s(): Allow the Pkt Since Voice VLAN UnauthMode is ENABLE [ 1508] %s(): acceptLLDPDU is TRUE [ 152b] HHHHHHHHHHHHHHHHHHHHHHHHHHHHHXindex is vlanId [ 15c0] dot1s_state[%d] = %d [ 15da] ^ [ 15e0] Comparing DA to %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x [ 1620] Cos Priorities for HIGH/NORMAL should be with in the range: [0-7] !!! [ 1668] Updating COS PRIORITY :: HIGH (from %d to %d) NORMAL (from %d to %d)!!! [ 16b4] 0x%x [ 16bc] %08x [ 16c4] %d [ 16c8] L7_BCM_SHELL_SUPPORT - is not available in this build. [ 1701] List of hapiBroadDebug... functions -> [ 172c] hapiBroadDDPrint() - General info on each unit,slot and port [ 176c] hapiBroadDebugIPAddressAdd(i,p) - Add IP address [ 17a0] hapiBroadDebugStatsGet(unitNum, slotNum, portNum) - Get s/w port stat [ 17e8] hapiBroadDebugSocRegDump(reg, unit, pbmp) - Get SOC register dump [ 182c] hapiBroadDebugPhyRegDump(u, pbmp_t pbm) - Get PHY register dump [ 1870] hapiBroadDebugPcimDump(unit, off_start, count,printZero) - [ 18b0] hapiBroadDebugSwArlDump() - Get a S/w ARL dump [ 18e0] hapiBroadDebugDmaVecDump(addr) - [ 1904] hapiBroadDebugHwArlDump(pbmp) - Get H/W ARL dump [ 1938] hapiBroadDebugMemoryDump(memtype, unit, copyno, addr, numwords, flags) - Get the memory value for memtype [ 19a4] hapiBroadDebugFindL2(unit, vidMacHi, macLo) - Find a L2 Table entry [ 19ec] hapiBroadDebugFindL3(unit, ipAddr) - Find a L3 Table entry [ 1a28] hapiBroadDebugStpList() - List MSTP instances [ 1a58] hapiBroadDebugStpVlanList(instNumber) - List Vlans in a MSTP [ 1a98] hapiBroadDebugStpPortList(instNumber) - List ports in a MSTP [ 1ad8] hapiBroadDebugRegDump(unit) - Full dump of all registers (Huge output) [ 1b20] hapiBroadDebugVlanTable(unit) - List hardware VLAN table [ 1b5c] hapiBroadDebugPortStat(unit) - List hardware Port Stats [ 1b98] hapiBroadDebugL2TableDump(unit) - Dump the L2 Shadow Table [ 1bd4] hapiBroadDebugFrameMaxGet(unit, port) - Display maximum frame size for this unit/port [ 1c2c] hapiBroadDebugDumpAll(mmuDump,printFabrics) - Dump all memories and regsiters in system [ 1c88] hapiBroadDebugMemoryDumpAll(unit,mmuDump) - Dump all memories for unit [ 1cd0] rc = %d, size = %d [ 1ce4] USP(%d,%d,%d) [ 1cf4] stat#: %d, 0x%8.8x%8.8x, %d [ 1d19] Info for %s [ 1d28] < [ 1d2c] %s=%d%s [ 1d34] , [ 1d38] %s=0x%x%s [ 1d44] - [ 1d48] > [ 1d4c] ERROR: read from register %s failed: %s [ 1d78] COS=%d [ 1d80] Port=%d [ 1d8c] %x %x [ 1d94] User assertion failed: "%s", at %s:%d [ 1dbc] 0 [ 1dc0] ../../../../andl/hapi/esw/base/base/broad_debug.c [ 1df4] Herc not found. [ 1e08] Error %d reading register 0x%x. [ 1e2c] Register 0x%x is set to 0x%x [ 1e4c] UNKNOWN: [ 1e58] Port %d (PHY ID %d): %s (%s) [ 1e7c] %s 0x%02x: 0x%04x [ 1e91] Error: Port %d: soc_miim_read failed: %s [ 1ebd] Error: Port %d: soc_miim_write failed: %s [ 1ee8] 0x%04x %s: 0x%x [ 1efc] dump_pcim ERROR: offset must be a multiple of 4 [ 1f30] [ 1f34] Invalid memtype specified [ 1f50] %s.%d[0x%x]: [ 1f60] %08x [ 1f68] 0x%08x [ 1f70] Read ERROR: table[%s.%d] index[0x%x]: %s [ 1f9c] Entry not found [ 1fb0] Spanning Tree Instance [%d] : instNumber: %4d, stg: %4d [ 1fed] %s %d: In %s call to 'bcmx_stg_vlan_list' - FAILED : %d (Spanning Tree Instance not found) [ 204c] For Spanning Tree : %d [ 2065] %s %d: In %s call to 'bcmx_stg_vlan_list' - FAILED : %d [ 20a0] hapiBroadDebugStpVlanList [ 20bc] Vlan [%d] : %d [ 20cd] %s %d: In %s call to 'hapiBroadDot1sBcmStgMapGet' - FAILED : %d (Spanning Tree Instance not found) [ 2135] %s %d: In %s call to 'bcmx_stg_stp_get' - FAILED : %d (Spanning Tree Instance not found) [ 2190] Unit : %d Port : %d State : [ 21b0] Unknown ?? [ 21bc] Disabled [ 21c8] Discarding [ 21d4] Listening [ 21e0] Learning [ 21ec] Forwarding [ 21f8] Count [ 2201] %s %d: In %s call to 'bcmx_stg_stp_get' - FAILED : %d [ 2238] hapiBroadDebugStpPortList [ 225b] (4@LX0x%08x %s [ 2278] 0x%08x %s = 0x%08x%08x [ 2290] 0x%08x %s = 0x%08x [ 22a4] 0x%08x %s = ERROR [ 22b8] 0x%08x %s = Write Only [ 22d0] 0x%08x %s = 0x%s [ 22e4] %s.%s[%d]: [ 22f0] * [ 22f4] Read ERROR: table %s.%s[%d]: %s [ 2318] No ports specified. [ 2330] Error: Could not get port %s information: %d [ 2360] No software ARL shadow table [ 2380] stat[%d] == 0x%x [ 2394] hapiBuf [ 239d] Packet sending process to %d.%d.%d of size %d is OVER [ 23d9] Sending packet[%d] to %d.%d.%d (lport %d)of size %d [ 2411] Sending packet failed due to the failure of dma alloc [ 2448] hapiTxTask [ 2454] rc = %d [ 2460] test_q [ 2468] ******** Unit = %d , %s (%d), %s ********* [ 2494] ******** BEGIN BCM_UNIT %d *********** [ 24c0] soc_dump(%d) [ 24d0] soc_chip_dump(%d,0x%x) [ 24e8] ******** CMIC PCI Reg DUMPS *********** [ 2514] hapiBroadDebugPcimDump(%d,%d,%d) [ 2538] ******** Reg DUMPS (non-zero)*********** [ 2564] hapiBroadDebugRegNonZeroDump(%d) [ 2588] ******** Memory DUMPS *********** [ 25ac] hapiBroadDebugMemoryDumpAll(%d,%d) [ 25d0] ******** END BCM_UNIT %d *********** [ 25f9] ------------------------------------------------------------- [ 263b] Enable Threshold [ 2651] BCAST CTRL %d %d [ 2669] MCAST CTRL %d %d [ 2681] DLFCAST CTRL %d %d [ 269c] hapiDebugRegisteredSysInfoDump [ 26c0] /*=====================================================================*/ [ 270c] /* DRIVER INFORMATION */ [ 275c] /*---------------------------------*/ [ 2784] /* Output of bcm_rx_show(): */ [ 27a9] ******** bcm_rx_show Unit(%d)******** [ 27d4] /* Output of rxStats(): */ [ 27fc] /* Output of txStats(): */ [ 2824] /*--------------------------------------------------*/ [ 285c] /* Output of hapiBroadDebugPhyRegDump(): */ [ 2895] ******** hapiBroadDebugPhyRegDump(%d)******** [ 28c4] /*----------------------------------------*/ [ 28f4] /* Output of hapiBroadDebugDumpAll(): */ [ 293d] Trap BPDU to CPU: Disabled Failed [ 2961] Trap BPDU to CPU: Disabled Successfully [ 298d] Trap BPDU to CPU: Enabled Successfully [ 29b9] *********************** [ 29d4] modid = %u [ 29e4] unit = %u [ 29f0] modport = %u [ 2a00] port = %u [ 2a0c] 0x%02x: 0x%04x [ 2a1d] invalid phy_reg value (enter 0 to 16) [ 2a75] C [ 2a79] D [ 2aa4] %s %d: In %s call to 'hapiBroadMemInit' [ 2ad0] ../../../../andl/hapi/esw/base/base/broad_init.c [ 2b04] hapiBroadInit [ 2b15] %s %d: In %s call to 'hapiBroadDrvInit' [ 2b41] %s %d: In %s call to 'hapiBroadPolicyInit' [ 2b70] %s %d: In %s call to 'hapiBroadPhyInit' [ 2b9c] %s %d: In %s call to 'hapiBroadStatisticsInit' [ 2bcc] %s %d: In %s call to 'hapiBroadL2Init' [ 2bf4] %s %d: In %s call to 'hapiBroadL3Init' [ 2c1d] %s %d: In %s call to 'hapiBroadCpuBoardInit' [ 2c4d] %s %d: In %s call to 'osapiMalloc' [ 2c74] hapiBroadMemInit [ 2c88] hapiPktBuf [ 2c95] Card Insertion is incomplete for unit %d, slot %d. Wait for retry. [ 2cdc] %s %d: In %s call to 'hapiBroadPortMemAlloc' [ 2d0c] hapiBroadPhysicalCardInsert [ 2d28] %s %d: In %s call to 'hapiBroadPhysicalPortMapGet' [ 2d5d] %s %d: In %s call to 'usl_card_insert' [ 2d88] %s %d: In %s call to 'hapiBroadPortCtlInit' [ 2db9] %s %d: In %s call to 'hapiBroadDefaultConfigInit' [ 2ded] %s %d: In %s call to 'hapiBroadL3CardInit' [ 2e1c] %s %d: In %s call to 'hapiBroadPortPhyInit' [ 2e4c] hapiBroadPortMemAlloc [ 2e64] %s %d: In %s unknown port mode [ 2e84] %s %d: In %s call to 'sysapiHpcUnitIdentifierKeyGet' [ 2ebc] hapiBroadPhysicalPortMapGet [ 2ed8] Physical card insert failed due to missing BCMX ports. Unit = %d, Slot = %d. [ 2f28] Use 'devshell hapiBroadDebugBcmxMapDump()' to see existing ports. [ 2f6c] %s %d: In %s call to 'sysapiHpcCardDbEntryGet' [ 2f9c] hapiBroadCpuPortMapGet [ 2fb4] %s %d: call to 'bcmx_linkscan_enable_set' [ 2fe0] %s %d: call to 'bcmx_linkscan_register' [ 300c] hapiBroadReceive [ 3020] %s %d: call to 'bcmx_rx_register' [ 3044] %s %d: call to 'bcmx_rx_start' [ 3064] %s %d: call to 'bcm_l2_addr_register' [ 308c] %s %d: call to 'bcmx_l2_notify_start' [ 30bc] %s %d: In %s call to 'hapiBroadCpuPortMapGet' [ 30ec] hapiBroadCpuCardInsert [ 3109] %s %d: In %s call to 'hapiBroadApplyConfig' [ 3138] hapiBroadCardPluginNotify [ 3154] ../../../../andl/hapi/esw/switching/broad_l2_lag.c [ 3189] %s %d: In %s max members per LAG exceeded [ 31b4] hapiBroadLagPortAsyncAdd [ 31d0] Adding %d.%d.%d to %d.%d.%d (Up Time: %d) [ 31fc] Failed to set max frame on %d [ 321c] Failed to set pvid [ 3234] Removing %d.%d.%d from %d.%d.%d (Up Time: %d) [ 3265] %s %d: In %s GET not supported for this command [ 3298] hapiBroadADTrunkModeSet [ 32b0] hapiBroadLagHashModeSet [ 32d3] 7 [ 32df] 7Error: bcmx_trunk_egress_get(), tid = %d, rv = %d [ 3314] List Size = %d [ 3324] Error: List size is no equal to 2. [ 3348] Swapped ports %d and %d in lag %d [ 336c] Error: bcmx_trunk_egress_set (), tid = %d, rv = %d [ 33a0] ../../../../andl/hapi/esw/switching/broad_l2_std.c [ 33d5] %s %d: In %s call to 'bcmx_stg_create' - FAILED : %d [ 340c] hapiBroadSystemDot1sInstanceCreate [ 3431] Creating Instance: %d [ 3449] %s %d: In %s call to 'bcmx_stg_vlan_list' - FAILED : %d [ 3484] hapiBroadSystemDot1sInstanceDelete [ 34a9] %s %d: In %s call to 'bcmx_stg_destroy' - FAILED : %s [ 34e1] %s %d: In %s call to 'bcmx_stg_vlan_remove' - FAILED : %d [ 351c] Removing VLAN %d from STG ID %d [ 3541] Deleting Instance: %d [ 3559] %s %d: In %s - Invalid VLAN ID: %d [ 3580] hapiBroadSystemDot1sInstanceVlanAdd [ 35a4] Adding VLAN %d to instance %d [ 35c9] %s %d: In %s call to 'bcmx_stg_vlan_add' - FAILED : %d [ 3604] hapiBroadSystemDot1sInstanceVlanRemove [ 362d] %s %d: In %s - VLAN ID: %d not a member of instance %d [ 3668] Removing VLAN %d from instance %d [ 368c] Passing rc %d for application reference %d [ 36b9] %s %d: In %s call to 'bcmx_stg_stp_set' - FAILED : %d [ 36f0] hapiBroadDot1sStateAsyncSet [ 370d] %s %d: In %s call to 'bcmx_stg_stp_set' - FAILED : %d (Spanning Tree Instance not found) [ 3769] Setting dot1s state for port %d.%d.%d on instance %d to [ 37a4] DAPI_PORT_DOT1S_DISCARDING [ 37c0] DAPI_PORT_DOT1S_LEARNING [ 37dc] DAPI_PORT_DOT1S_FORWARDING [ 37f8] DAPI_PORT_DOT1S_ADMIN_DISABLED [ 3818] DAPI_PORT_DOT1S_NOT_PARTICIPATING [ 383d] %s %d: In %s call to 'hapiBroadDot1sBcmStgMapGet' - FAILED : %d (Spanning Tree Instance %d not found) [ 38a6] 5: :0:(:09Ѐ99:: Received dot1s state set for port %d.%d.%d on instance %d (AR %d) to [ 3916] <<<<Ā< %s %d: In %s call to 'bcmx_port_dtag_mode_set' - FAILED : %d [ 3968] hapiBroadPortDoubleVlanTagConfig [ 398d] %s %d: In %s call to 'bcmx_port_tpid_set' - FAILED : %d [ 39c9] %s %d: In %s call to 'bcmx_port_learn_set' - FAILED : %d [ 3a04] hapiBroadLearnSet [ 3a19] %s %d: In %s invalid getOrSet Command [ 3a40] hapiBroadIntfMacLockConfig [ 3a5c] hapiBroadIntfLldpConfig [ 3a76] ^ [ 3a7c] hapiBroadAddrMacAddressEntryAdd [ 3a9d] %s %d: In %s call to 'bcmx_l2_addr_add' - FAILED : %d [ 3ad5] %s %d: In %s call to 'CPU_USP_GET' - FAILED : %d [ 3b08] hapiBroadAddrMacAddressEntryModify [ 3b2d] %s %d: In %s call to 'CPU_USP_GET' - FAILED [ 3b5c] hapiBroadAddrMacAddressEntryDelete [ 3b81] %s %d: In %s call to 'usl_bcmx_l2_addr_remove' - FAILED : %d [ 3bc1] %s %d: In %s call to 'bcmx_l2_age_timer_set' - FAILED : %d [ 3c00] hapiBroadAddrAgingTime [ 3c18] hapiBroadAddrFlushAll [ 3c31] %s %d: In %s invalid mode [ 3c4c] hapiBroadAddrLogicalIntfCreate [ 3c6c] hapiBroadAddrLogicalIntfDelete [ 3c94] hapiFrameAsyncLearnQ [ 3cac] hapiBroadAddrMacFrameAsyncLearn [ 3ccc] Invalid USP calculated from the BCM uport bcmx_l2_addr->lport = %x. USP not able to be calculated from the learn event for BCM driver. [ 3d55] %s %d: call to dapiCallback [ 3d74] Invalid LAG id %d. Possible synchronization issue between the BCM driver and HAPI [ 3dc8] Invalid uport calculated from the BCM uport bcmx_l2_addr->lport = %x. Uport not valid from BCM driver. [ 3e30] Age = %d [ 3e44] Use the usl_macsync_stats_print() instead for stacking builds [ 3e84] ageErr = %d [ 3e98] nonNativeAge = %d [ 3eac] learn = %d [ 3ec0] learnErr = %d [ 3ed4] learnFantom = %d [ 3ee8] hapiL2AddrMacSyncTask [ 3f00] hapiL2AddrFlushQueue [ 3f18] hapiL2AddrFlushTask [ 3f2c] hapiBroadL2AddrFlushTask [ 3f48] %s : Flushing physical port 0x%x [ 3f6c] %s : Flushing lag port %d [ 3f88] %s : Flushing vlan %d [ 3fa0] hapiL2AddrFlushQueue: failed in recv message [ 3fd8] %s %d: Failure in %s! rc = %d ! [ 3ffc] hapiBroadL2ProtectedGroupConfig [ 401c] Invalid Flush type %d requested [ 4040] hapiDot1sAsyncCmdQ [ 4054] hapiLagAsyncCmdQ [ 4068] hapiL2AsyncCmdQ [ 4078] hapiL2AsyncTask [ 4088] Max Number of Flushes in a single pass of the task = %d [ 40c4] Number of Trunk Flushes issued = %d [ 40ec] Number of Port Flushes issued = %d [ 4114] Number of Port Flushes done = %d [ 413c] Number of Vlan Flushes issued = %d [ 4164] Number of Invalid Flushes issued = %d [ 418c] ../../../../andl/hapi/esw/switching/broad_l2_vlan.c [ 41c0] Driver failed to create %d vlans in the hardware [ 41f4] Failed to set cpu vlan membership in %s:%d rv %d [ 4228] hapiBroadQvlanVlanListCreate [ 4248] Failed to set cpu vlan membership rv %d [ 4274] Vlan bulk cmd %d failed in %s:%d rv %d [ 429c] Vlan bulk cmd %d failed rv %d [ 42bc] hapiBroadQvlanVlanListPurge [ 42e3] 7 [ 42e8] Error: Unabe to set the phy auto power down mode for port %d [ 4328] Loopback test for Unit: %d ... [ 4348] Failed ! Ports: [ 435c] Success ! [ 4368] %d [ 4370] Phy loopback test in progress ... [ 4395] Unit: %d ... [ 43a4] Failed ! Ports: [ 43c3]  0@LXd|../../../../andl/hapi/esw/policy/broad_policy.c [ 4423] <<LXdp|DtPolicy table overflow. [ 4470] Created policy %d [ 4484] Setting stage for policy %d to %d [ 44a8] Deleted policy %d [ 44bc] Max Rule count exceeded. [ 44d8] Invalid priority. [ 44ec] Rule count exceeded. [ 4504] Policy %d does not contain rule %d. The rule was not added to the policy due to a discrepancy in the rule count for this specific policy . Additionally, the message can be displayed when an old rule is being modified, but the old rule is not in the policy. [ 461b] (܀܀܀ [ 4673] (Invalid meter info specified: cir %d, cbs %d, pir %d, pbs %d [ 46b4] %02x [ 46d3] LLL Policy Table (%d bytes) [ 4714] Id Type Flags Rules [ 4730] [%4d] [ 4738] %11s %4x %5d [ 4750] {%02x, %02x, %02x} [ 4764] {%02x} [ 478f] (8@HPX Counted (%c%c) [ 47bc] Metered (%c%c) : CIR %d CBS %d PIR %d PBS %d [ 47f4] Action %10s: [ 4808] /NONCONF/ [ 4814] /EXCEED / [ 4820] /IN-PROF/ [ 482c] Field %10s = { [ 4840] , [ 4844] } [ 4848] n/a [ 484d] Policy %d [ 4858] Rule %d [ 4864] Invalid policy (%d), valid range is [0 .. %d) [ 4894] policyId is %d [ 48a4] BROAD_MAX_POLICIES == %d [ 48d0] BROAD_MAX_POLICIES_PER_BCM_UNIT == %d [ 48fc] BROAD_MAX_RULES_PER_POLICY == %d [ 4928] BROAD_MAX_RULES == %d (%d free) [ 495c] BROAD_MAX_SYSTEM_POLICIES == %d [ 4988] BROAD_MAX_RULES_PER_SMALL_POLICY == %d [ 49b4] sizeof(policy_map_table_t) == %d [ 49e0] sizeof(BROAD_POLICY_ENTRY_t) == %d [ 4a0c] sizeof(BROAD_POLICY_SMALL_ENTRY_t) == %d [ 4a38] sizeof(BROAD_POLICY_RULE_ENTRY_t) == %d [ 4a64] sizeof(BROAD_FIELD_ENTRY_t) == %d [ 4a90] sizeof(BROAD_ACTION_ENTRY_t) == %d [ 4abc] sizeof(BROAD_POLICY_TABLE_ENTRY_t) == %d [ 4aec] policy_map_table == %d [ 4b10] policyPartialData == %d [ 4b34] broadUtilTable == %d [ 4b58] broadPolicyTable == %d [ 4b7c] broadPolicyTableRulePool == %d [ 4ba0] ../../../../andl/hapi/esw/policy/broad_policy_bcmx.c [ 4bd8] MACDA [ 4be0] MACSA [ 4be8] ETHTYPE [ 4bf0] OVID [ 4bf8] IVID [ 4c00] DSCP [ 4c08] PROTO [ 4c10] SIP [ 4c18] DIP [ 4c20] SPORT [ 4c28] DPORT [ 4c30] IP6_HOPLIMIT [ 4c40] IP6_NEXTHEADER [ 4c50] LOOKUP_STATUS [ 4c60] IP6_SRC [ 4c68] IP6_DST [ 4c70] IP6_FLOWLABEL [ 4c80] IP6_TRAFFIC_CLASS [ 4c94] ICMP_MSG_TYPE [ 4ca4] CLASS_ID [ 4cb0] L2_CLASS_ID [ 4cbc] ISCSI_OPCODE [ 4ccc] TCP_CONTROL [ 4cd8] VLAN_FORMAT [ 4ce4] IP_TYPE [ 4cec] SOFTDROP [ 4cf8] HARDDROP [ 4d04] PERMIT [ 4d10] REDIRECT [ 4d1c] MIRROR [ 4d28] TRAP2CPU [ 4d34] COPY2CPU [ 4d40] SETCOSQ [ 4d4c] SETDSCP [ 4d58] SETTOS [ 4d64] SETUSERP [ 4d70] SETDPREC [ 4d7c] SETOVID [ 4d88] SETIVID [ 4d94] ADDOVID [ 4da0] SETCLASS [ 4dac] SETREASON [ 4db8] PORT [ 4dc4] PORT_LOW [ 4dd0] VLAN [ 4ddc] SYSTEM_PORT [ 4de8] SYSTEM [ 4df4] COSQ [ 4e00] ../../../../andl/hapi/esw/policy/broad_policy_common.c [ 4e38] INVALID [ 4e42] (؀(\(((((((((((Ȁ(Ѐ(؀(((() [ 4e92] )))) )())Ѐ))؀))))* [ 4eca] **)** *(*0*8*@*H))*P*X))../../../../andl/hapi/esw/policy/broad_policy_util.c [ 4f40] ERROR: policy %d, tmpPolicy %d, size %d, data %d %d %d %d %d %d %d %d. An issue installing the policy due to a possible duplicate hash. [ 4fc8] %s %d: In %s call to 'hapiBroadStatisticsPortInit' [ 4ffc] %s %d: In %s call to 'hapiBroadL2StdPortInit' [ 502c] %s %d: In %s call to 'hapiBroadL2VlanPortInit' [ 505c] %s %d: In %s call to 'hapiBroadL2LagPortInit' [ 508c] %s %d: In %s call to 'hapiBroadL2McastPortInit' [ 50c0] %s %d: In %s call to 'hapiBroadL3PortInit' [ 50ec] ../../../../andl/hapi/esw/base/base/broad_port.c [ 5120] hapiBroadPortCtlInit [ 5138] %s %d: In %s call to 'hapiBroadStdPortInit' [ 5168] %s %d: In %s call to 'hapiBroadPortCtlInit' [ 5198] hapiBroadSlotCtlInit [ 51b0] Cache Hits: %d [ 51c0] Cache miss due to wrong IF: %d [ 51e0] Cache miss due to timestamp: %d [ 5205] %s %d: In %s call to 'osapiSemaBCreate' [ 5230] ../../../../andl/hapi/esw/base/base/broad_stats.c [ 5264] hapiBroadStatisticsInit [ 527e] BXC4C<CDCLCTC\A܀CdClCtC|CCCCCCCA܀CCĀA܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀A܀C̀CԀC܀CCCCA܀DD DA܀DA܀D$D,D4D<A܀A܀DDDLDTD\DdDlDtD|DDDDDDDDDĀD̀DStarting Stats Collector Task. LoopCount: %d [ 53e0] Stats connection terminated after %d loops. [ 5410] hapi: Stats [ 541c] ERROR: Stats collection is already in progress. [ 5450] ERROR: Failed to start stats collector task [ 5480] ERROR: Stats collection is not running. [ 54ac] ../../../../andl/hapi/esw/base/base/broad_system.c [ 54e0] Failed to apply port mirroring configuration (enable from = NA, to = %d, rv %d) [ 5534] Failed to apply port mirroring configuration (enable from = %d, to = %d, rv %d) [ 5589] %s %d: In %s invalid getOrSet Command [ 55b0] hapiBroadSystemMirroring [ 55cd] %s %d: In %s, invalid probe port : %d%d:%d [ 55fc] hapiBroadSystemMirroringPortModify [ 5620] hapiBroadSystemMacAddress [ 563d] %s %d: In %s call to 'bcm_l2_addr_add' - FAILED : %d. Failed to add an L2 address to the MAC table. This should [ 56b0] only happen when a hash collision occurs or the table is full.../../../../andl/hapi/esw/base/base/broad_system.c [ 5725] %s %d: In %s call to 'CPU_USP_GET' - FAILED : %d [ 5758] hapiBroadSystemBroadcastControlModeSet [ 5780] hapiBroadIntfBroadcastControlModeSet() [ 57a9] %s %d: In %s invalid Threshold unit [ 57d1] %s %d: In %s invalid STORM type [ 57f4] Failed to set the flow-control mode for usp %d/%d/%d rv %d [ 5830] hapiBroadIntfAutoNegotiateConfig [ 5855] %s %d: In %s stp state get not supported [ 5880] hapiBroadIntfStpState [ 5899] %s %d: In %s call to 'bcmx_port_stp_set' failed! [ 58cd] %s %d: In %s invalid Spanning Tree State [ 58fa] cceee e %s %d: In %s Loopback Mode is not supported [ 5940] hapiBroadIntfLoopbackConfig [ 595d] %s %d: In %s call to 'bcmx_port_loopback_get' failed! [ 5995] %s %d: In %s call to 'bcmx_port_loopback_set' failed! [ 59cd] %s %d: Failure in %s! [ 59e4] hapiBroadSystemSnoopConfig [ 5a01] hapiBroadGetSystemBoardFamily : Unknown BoardFamily, npd_id = %x [ 5a46] nnnnĀnnnnnǹǹnԀn܀nn %s %d: In %s Failed to set bcmSwitchCpuProtoIgmpPriority - %d [ 5ac0] hapiBroadConfigMldFilter [ 5adc] %s:%d bcmx_switch_control_set failed: rv %d [ 5b0c] hapiBroadConfigIgmpFilterRaptor [ 5b35] %s %d: In %s DAPI_CMD_GET_SET_t type not supported [ 5b6c] hapiBroadIntfMaxFrameSizeConfig [ 5b8d] %s %d: In %s invalid Denial of Service Type [ 5bbc] hapiBroadSystemDosControlConfigApply [ 5be7] @܀D [ 5c07] @Ѐ4܀hhapiBroadSystemDosControlConfig [ 5c44] hapiBroadIntfDosControlConfig [ 5c64] hapiBroadIntfBpduFiltering [ 5c80] hapiBroadIntfBpduFlood [ 5c98] %s:%d, bcm_linkscan_mode_set_pbm failed, rv %d [ 5cc8] hapiBroadIntfCableTest [ 5ce2] Cable diag result: %d [ 5cfc] Pair %c is %d, length %2dm (+/-%d) [ 5d20] %s:%d, bcm_port_cable_diag failed, rv %d [ 5d54] hapiBroadSystemDosPingFloodingFilter [ 5d84] hapiBroadSystemDosSmurfAttackFilter [ 5db4] hapiBroadSystemDosSynAckFloodingFilter [ 5ddc] hapiBroadSystemCpuSamplePriority [ 5e00] hapiBroadSystemSampleRandomSeed [ 5e20] hapiBroadIntfSampleRate [ 5e38] hapiBroadIntfFiberDiag() [ 5e54] hapiBroadIntfFiberDiagTest [ 5e70] Failed to set admin mode for ports in unit/slot %d/%d rv %d [ 5eb0] hapiBroadIntfLedBlinkSet [ 5ecd] %s %d: bcm_robo_port_led_blink_set failed, rv %d [ 5f00] hapiBroadSystemloopProtectionConfig [ 5f3c] DAPI_FAMILY_UNSPECIFIED [ 5f54] DAPI_FAMILY_CONTROL [ 5f68] DAPI_FAMILY_CARD [ 5f7c] DAPI_FAMILY_SYSTEM [ 5f90] DAPI_FAMILY_FRAME [ 5fa4] DAPI_FAMILY_INTF_MGMT [ 5fbc] DAPI_FAMILY_ADDR_MGMT [ 5fd4] DAPI_FAMILY_QVLAN_MGMT [ 5fec] DAPI_FAMILY_IPSUBNET_VLAN_MGMT [ 600c] DAPI_FAMILY_MAC_VLAN_MGMT [ 6028] DAPI_FAMILY_GARP_MGMT [ 6040] DAPI_FAMILY_LOGICAL_INTF_MGMT [ 6060] DAPI_FAMILY_LAG_MGMT [ 6078] DAPI_FAMILY_ROUTING_MGMT [ 6094] DAPI_FAMILY_ROUTING_ARP_MGMT [ 60b4] DAPI_FAMILY_ROUTING_INTF_MGMT [ 60d4] DAPI_FAMILY_ROUTING_INTF_MCAST [ 60f4] DAPI_FAMILY_QOS_DIFFSERV_MGMT [ 6114] DAPI_FAMILY_QOS_ACL_MGMT [ 6130] DAPI_FAMILY_QOS_COS_MGMT [ 614c] DAPI_FAMILY_SERVICES [ 6164] DAPI_CMD_UNSPECIFIED [ 617c] DAPI_CMD_CONTROL_CALLBACK_REGISTER [ 61a0] DAPI_CMD_CARD_INSERT [ 61b8] DAPI_CMD_CARD_REMOVE [ 61d0] DAPI_CMD_CARD_PLUGIN [ 61e8] DAPI_CMD_CARD_UNPLUG [ 6200] DAPI_CMD_SYSTEM_MIRRORING [ 621c] DAPI_CMD_SYSTEM_MIRRORING_MODIFY [ 6240] DAPI_CMD_SYSTEM_SYSTEM_IP_ADDRESS [ 6264] DAPI_CMD_SYSTEM_SYSTEM_MAC_ADDRESS [ 6288] DAPI_CMD_SYSTEM_BROADCAST_CONTROL_MODE_SET [ 62b4] DAPI_CMD_SYSTEM_FLOW_CONTROL [ 62d4] DAPI_CMD_SYSTEM_SNOOP_CONFIG [ 62f4] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_CREATE [ 631c] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_DELETE [ 6344] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_VLAN_ADD [ 636c] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_VLAN_REMOVE [ 6398] DAPI_CMD_SYSTEM_DOT1X_CONFIG [ 63b8] DAPI_CMD_SYSTEM_DOSCONTROL_CONFIG [ 63dc] DAPI_CMD_SYSTEM_CPU_SAMPLE_PRIORITY [ 6400] DAPI_CMD_SYSTEM_SAMPLE_RANDOM_SEED [ 6424] DAPI_CMD_INTF_SAMPLE_RATE [ 6440] DAPI_CMD_SYSTEM_LOOP_PROTECTION_CONFIG [ 6468] DAPI_CMD_INTF_BLINK_SET_NAME [ 6488] DAPI_CMD_FRAME_UNSOLICITED_EVENT [ 64ac] DAPI_CMD_FRAME_SEND [ 64c0] DAPI_CMD_INTF_UNSOLICITED_EVENT [ 64e0] DAPI_CMD_INTF_STP_STATE [ 64f8] DAPI_CMD_INTF_SPEED_CONFIG [ 6514] DAPI_CMD_INTF_AUTO_NEGOTIATE_CONFIG [ 6538] DAPI_CMD_INTF_LOOPBACK_CONFIG [ 6558] DAPI_CMD_INTF_ISOLATE_PHY_CONFIG [ 657c] DAPI_CMD_INTF_STATISTICS [ 6598] DAPI_CMD_INTF_FLOW_CONTROL [ 65b4] DAPI_CMD_INTF_CABLE_STATUS_GET [ 65d4] DAPI_CMD_INTF_FIBER_DIAG_GET [ 65f4] DAPI_CMD_INTF_DOT1S_STATE [ 6610] DAPI_CMD_INTF_DOT1X_STATUS [ 662c] DAPI_CMD_INTF_DOT1X_CLIENT_ADD [ 664c] DAPI_CMD_INTF_DOT1X_CLIENT_REMOVE [ 6670] DAPI_CMD_INTF_DOT1X_CLIENT_TIMEOUT [ 6694] DAPI_CMD_INTF_DOT1X_CLIENT_BLOCK [ 66b8] DAPI_CMD_INTF_DOUBLEVLAN_TAG_CONFIG [ 66dc] DAPI_CMD_INTF_MAX_FRAME_SIZE_CONFIG [ 6700] DAPI_CMD_INTF_MAC_LOCK_CONFIG [ 6720] DAPI_CMD_INTF_DHCP_SNOOPING_CONFIG [ 6744] DAPI_CMD_INTF_DYNAMIC_ARP_INSPECTION_CONFIG [ 6770] DAPI_CMD_INTF_IPSG_CONFIG [ 678c] DAPI_CMD_INTF_IPSG_STATS_GET [ 67ac] DAPI_CMD_INTF_IPSG_CLIENT_ADD [ 67cc] DAPI_CMD_INTF_IPSG_CLIENT_DELETE [ 67f0] DAPI_CMD_INTF_DOT3AH_CONFIG_ADD [ 6810] DAPI_CMD_INTF_DOT3AH_CONFIG_REMOVE [ 6834] DAPI_CMD_INTF_DOT3AH_REM_LB_CONFIG [ 6858] DAPI_CMD_INTF_DOT3AH_REM_LB_ADD [ 6878] DAPI_CMD_INTF_DOT3AH_REM_LB_ADD_UNI [ 689c] DAPI_CMD_INTF_DOT3AH_REM_LB_DELETE [ 68c0] DAPI_CMD_INTF_LLDP_CONFIG [ 68dc] DAPI_CMD_INTF_BROADCAST_CONTROL_MODE_SET [ 6908] DAPI_CMD_INTF_DOT1S_BPDU_FILTERING [ 692c] DAPI_CMD_INTF_DOT1S_BPDU_FLOOD [ 694c] DAPI_CMD_INTF_CAPTIVE_PORTAL_CONFIG [ 6970] DAPI_CMD_INTF_DOSCONTROL_CONFIG [ 6990] DAPI_CMD_ADDR_UNSOLICITED_EVENT [ 69b0] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_ADD [ 69d4] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_MODIFY [ 69fc] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_DELETE [ 6a24] DAPI_CMD_ADDR_MAC_FILTER_ADD [ 6a44] DAPI_CMD_ADDR_MAC_FILTER_DELETE [ 6a64] DAPI_CMD_ADDR_AGING_TIME [ 6a80] DAPI_CMD_ADDR_FLUSH [ 6a94] DAPI_CMD_ADDR_FLUSH_ALL [ 6aac] DAPI_CMD_QVLAN_UNSOLICITED_EVENT [ 6ad0] DAPI_CMD_QVLAN_VLAN_CREATE [ 6aec] DAPI_CMD_QVLAN_VLAN_LIST_CREATE [ 6b0c] DAPI_CMD_QVLAN_VLAN_LIST_PURGE [ 6b2c] DAPI_CMD_QVLAN_VLAN_PORT_ADD [ 6b4c] DAPI_CMD_QVLAN_VLAN_PORT_DELETE [ 6b6c] DAPI_CMD_QVLAN_VLAN_PURGE [ 6b88] DAPI_CMD_QVLAN_PORT_VLAN_LIST_SET [ 6bac] DAPI_CMD_QVLAN_PORT_CONFIG [ 6bc8] DAPI_CMD_QVLAN_PORT_PRIORITY [ 6be8] DAPI_CMD_QVLAN_PORT_PRIORITY_TO_TC_MAP [ 6c10] DAPI_CMD_QVLAN_VLAN_STATS_GET [ 6c30] DAPI_CMD_QVLAN_MCAST_FLOOD_SET [ 6c50] DAPI_CMD_PROTECTED_PORT_ADD [ 6c6c] DAPI_CMD_PROTECTED_PORT_DELETE [ 6c8c] DAPI_CMD_IPSUBNET_VLAN_CREATE [ 6cac] DAPI_CMD_IPSUBNET_VLAN_DELETE [ 6ccc] DAPI_CMD_MAC_VLAN_CREATE [ 6ce8] DAPI_CMD_MAC_VLAN_DELETE [ 6d04] DAPI_CMD_GARP_GVRP [ 6d18] DAPI_CMD_GARP_GMRP [ 6d2c] DAPI_CMD_GVRP_GMRP_CONFIG [ 6d48] DAPI_CMD_GARP_GROUP_REG_MODIFY [ 6d68] DAPI_CMD_GARP_GROUP_REG_DELETE [ 6d88] DAPI_CMD_LOGICAL_INTF_CREATE [ 6da8] DAPI_CMD_LOGICAL_INTF_DELETE [ 6dc8] DAPI_CMD_LAG_CREATE [ 6ddc] DAPI_CMD_LAG_PORT_ADD [ 6df4] DAPI_CMD_LAG_PORT_DELETE [ 6e10] DAPI_CMD_LAG_DELETE [ 6e24] DAPI_CMD_AD_TRUNK_MODE_SET [ 6e40] DAPI_CMD_LAG_HASHMODE_SET [ 6e5c] DAPI_CMD_ROUTING_ROUTE_ENTRY_ADD [ 6e80] DAPI_CMD_ROUTING_ROUTE_ENTRY_MODIFY [ 6ea4] DAPI_CMD_ROUTING_ROUTE_ENTRY_DELETE [ 6ec8] DAPI_CMD_ROUTING_ROUTE_FORWARDING_CONFIG [ 6ef4] DAPI_CMD_ROUTING_ROUTE_BOOTP_DHCP_CONFIG [ 6f20] DAPI_CMD_ROUTING_ROUTE_ICMP_REDIRECTS_CONFIG [ 6f50] DAPI_CMD_ROUTING_ROUTE_MCAST_FORWARDING_CONFIG [ 6f80] DAPI_CMD_ROUTING_ROUTE_MCAST_IGMP_CONFIG [ 6fac] DAPI_CMD_ROUTING_ARP_ENTRY_ADD [ 6fcc] DAPI_CMD_ROUTING_ARP_ENTRY_MODIFY [ 6ff0] DAPI_CMD_ROUTING_ARP_ENTRY_DELETE [ 7014] DAPI_CMD_ROUTING_ARP_ENTRY_QUERY [ 7038] DAPI_CMD_ROUTING_ARP_ENTRY_RESOLVE [ 705c] DAPI_CMD_ROUTING_INTF_ADD [ 7078] DAPI_CMD_ROUTING_INTF_MODIFY [ 7098] DAPI_CMD_ROUTING_INTF_DELETE [ 70b8] DAPI_CMD_ROUTING_INTF_MCAST_FWD_CONFIG [ 70e0] DAPI_CMD_ROUTING_INTF_LOCAL_MCASTADD [ 7108] DAPI_CMD_ROUTING_INTF_LOCAL_MCASTDELETE [ 7130] DAPI_CMD_ROUTING_INTF_VRID_ADD [ 7150] DAPI_CMD_ROUTING_INTF_VRID_DELETE [ 7174] DAPI_CMD_ROUTING_INTF_IPV4_ADDR_SET [ 7198] DAPI_CMD_ROUTING_INTF_MCAST_SNOOP_NOTIFY [ 71c4] DAPI_CMD_ROUTING_INTF_MCAST_ADD [ 71e4] DAPI_CMD_ROUTING_INTF_MCAST_DELETE [ 7208] DAPI_CMD_ROUTING_INTF_MCAST_COUNTERS_GET [ 7234] DAPI_CMD_ROUTING_INTF_MCAST_USE_GET [ 7258] DAPI_CMD_ROUTING_INTF_MCAST_PORT_ADD_NAME [ 7284] DAPI_CMD_ROUTING_INTF_MCAST_PORT_DELETE_NAME [ 72b4] DAPI_CMD_ROUTING_INTF_MCAST_VLAN_PORT_MEMBER_UPDATE_NAME [ 72f0] DAPI_CMD_ROUTING_INTF_MCAST_TTL_SET [ 7314] DAPI_CMD_ROUTING_INTF_MCAST_UNSOLICITED_EVENT [ 7344] DAPI_CMD_QOS_DIFFSERV_INST_ADD [ 7364] DAPI_CMD_QOS_DIFFSERV_INST_DELETE [ 7388] DAPI_CMD_QOS_DIFFSERV_INTF_STAT_IN_GET [ 73b0] DAPI_CMD_QOS_DIFFSERV_INTF_STAT_OUT_GET [ 73d8] DAPI_CMD_QOS_ACL_ADD [ 73f0] DAPI_CMD_QOS_ACL_DELETE [ 7408] DAPI_CMD_QOS_ACL_RULE_COUNT_GET [ 7428] DAPI_CMD_QOS_SYS_ACL_ADD [ 7444] DAPI_CMD_QOS_SYS_ACL_DELETE [ 7460] DAPI_CMD_QOS_COS_IP_PRECEDENCE_TO_TC_MAP [ 748c] DAPI_CMD_QOS_COS_IP_DSCP_TO_TC_MAP [ 74b0] DAPI_CMD_QOS_COS_INTF_TRUST_MODE_CONFIG [ 74d8] DAPI_CMD_QOS_COS_INTF_CONFIG [ 74f8] DAPI_CMD_QOS_COS_INTF_STATUS [ 7518] DAPI_CMD_QOS_COS_QUEUE_SCHED_CONFIG [ 753c] DAPI_CMD_QOS_COS_QUEUE_TAILDROP_CONFIG [ 7564] DAPI_CMD_QOS_COS_QUEUE_WRED_CONFIG [ 7588] DAPI_CMD_QOS_VOIP_SESSION [ 75a4] DAPI_CMD_QOS_VOIP_PRFILE [ 75c0] DAPI_CMD_QOS_VOIP_STATS_GET [ 75dc] DAPI_CMD_QOS_ISCSI_TARGET_PORT_ADD [ 7600] DAPI_CMD_QOS_ISCSI_TARGET_PORT_DELETE [ 7628] DAPI_CMD_QOS_ISCSI_CONNECTION_ADD [ 764c] DAPI_CMD_QOS_ISCSI_CONNECTION_REMOVE [ 7674] DAPI_CMD_QOS_ISCSI_COUNTER_GET [ 7694] DAPI_CMD_SERVICES_UNSOLICITED_EVENT [ 76b8] DAPI_CMD_IPV6_ROUTE_ENTRY_ADD [ 76d8] DAPI_CMD_IPV6_ROUTE_ENTRY_MODIFY [ 76fc] DAPI_CMD_IPV6_ROUTE_ENTRY_DELETE [ 7720] DAPI_CMD_IPV6_FORWARDING_CONFIG [ 7740] DAPI_CMD_IPV6_BOOTP_DHCP_CONFIG [ 7760] DAPI_CMD_IPV6_ICMP_REDIRECTS_CONFIG [ 7784] DAPI_CMD_IPV6_MCAST_FOWARDING_CONFIG [ 77ac] DAPI_CMD_IPV6_ROUTE_MCAST_IGMP_CONFIG [ 77d4] DAPI_CMD_IPV6_NEIGH_ENTRY_ADD [ 77f4] DAPI_CMD_IPV6_NEIGH_ENTRY_MODIFY [ 7818] DAPI_CMD_IPV6_NEIGH_ENTRY_DELETE [ 783c] DAPI_CMD_IPV6_NEIGH_ENTRY_QUERY [ 785c] DAPI_CMD_IPV6_NEIGH_UNSOLICITED_EVENT [ 7884] DAPI_CMD_IPV6_INTF_MCAST_FWD_CONFIG [ 78a8] DAPI_CMD_IPV6_INTF_LOCAL_MCASTADD [ 78cc] DAPI_CMD_IPV6_INTF_LOCAL_MCASTDELETE [ 78f4] DAPI_CMD_IPV6_INTF_ADDR_ADD [ 7910] DAPI_CMD_IPV6_INTF_ADDR_DELETE [ 7930] DAPI_CMD_IPV6_INTF_STATS_GET [ 7950] DAPI_CMD_TUNNEL_CREATE [ 7968] DAPI_CMD_TUNNEL_DELETE [ 7980] DAPI_CMD_TUNNEL_NEXT_HOP_SET [ 79a0] DAPI_CMD_L3_TUNNEL_ADD [ 79b8] DAPI_CMD_L3_TUNNEL_DELETE [ 79d4] DAPI_CMD_L3_TUNNEL_MAC_ADDRESS_ADD [ 79f8] DAPI_CMD_L3_TUNNEL_MAC_ADDRESS_DELETE [ 7a20] DAPI_CMD_DEBUG_SHELL [ 7a38] DAPI_CMD_VOICE_VLAN_DEVICE_ADD [ 7a58] DAPI_CMD_VOICE_VLAN_DEVICE_REMOVE [ 7a7c] DAPI_CMD_VOICE_VLAN_COS_OVERRIDE [ 7aa0] DAPI_CMD_VOICE_VLAN_AUTH [ 7abc] DAPI_CMD_L2_TUNNEL_CREATE [ 7ad8] DAPI_CMD_L2_TUNNEL_DELETE [ 7af4] DAPI_CMD_L2_TUNNEL_MODIFY [ 7b10] DAPI_CMD_L2_DOT1AD_INTF_TYPE [ 7b30] DAPI_CMD_L2_DOT1AD_TUNNEL_ACTION [ 7b54] DAPI_CMD_L2_DOT1AD_INTF_STATS [ 7b74] DAPI_CMD_L2_DOT1AD_APPLY_INTF_CONFIG_DATA [ 7ba0] DAPI_CMD_DOT1AD_ADD [ 7bb4] DAPI_CMD_DOT1AD_DELETE [ 7bcc] DAPI_CMD_DOT1AD_RULE_COUNT_GET [ 7bed] The dapi command # %d:%s was left out of the dapiCtl case statement Please add it! [ 7c44] ../../../../andl/dapi/dapi.c [ 7c65] Error: usp %d/%d/%d: Card Not Attached [ 7c97] Hll\\\\\\\\\\\\\\\t\\(t(tttttttttttttttttttttttttttttttttttt(ttt\\\t\(\\\\tttt\\\\\\\\\ttt\\\tttttttt\\\\\\\\tttt(tttttttttttttttttt(ttttttt\\tttttttt\t\\\\\\(\\\\((((tttt((tttttttt\\tt<ttttttttttttttFAILURE (%s: %d) Code: 0x%08LX [ 7fd8] dapiCardInsert() [ 7fec] %s %d: In %s call to 'dapiLogicalCardInsert' (capwap tunnel) [ 802c] %s %d: In %s call to 'dapiLogicalCardInsert' (tunnel) [ 8064] %s %d: In %s call to 'dapiLogicalCardInsert' (loopbk) [ 809c] %s %d: In %s call to 'dapiLogicalCardInsert' (vlan) [ 80d4] %s %d: In %s call to 'dapiLagCardInsert' [ 8100] %s %d: In %s call to 'dapiCpuCardInsert' [ 812c] %s %d: In %s call to 'sysapiHpcCardDbEntryGet' [ 815c] dapiCardRemove() [ 8170] dapiCpuCardInsert() [ 8184] %s %d: In %s Invalid line card ID [ 81a8] %s %d: In %s call to 'osapiMalloc' [ 81cc] dapiLagCardInsert() [ 81e0] dapiLogicalCardInsert() [ 81f8] %s %d: passed invalid cardType (%u) to %s [ 8224] CONTROL [ 822c] CARD [ 8234] SYSTEM [ 823c] INTF [ 8244] LOGICAL_INTF [ 8254] LAG [ 8258] AD_TRUNK [ 8264] LAG_HASHMODE [ 8274] ADDR [ 827c] QVLAN [ 8284] GARP [ 828c] GVRP [ 8294] ROUTING_ROUTE [ 82a4] ROUTING_ARP [ 82b0] ROUTING_INTF [ 82c0] ROUTING_INTF_MCAST [ 82d4] FRAME [ 82dc] QOS_DIFFSERV [ 82ec] QOS_ACL [ 82f4] QOS_COS [ 82fc] SERVICES [ 8308] DAPI: Command %4.36s not supported in this build [ 833c] DAPI: Command %4.36s not supported for usp %u/%u/%u [ 8374] DAPI [ 837c] DAPI: unable to create the trace buffer [ 83a8] ../../../../andl/dapi/dapi_trace.c [ 83cc] DAPI: unable to delete the trace buffer [ 83fc] FRAME [ 8404] ??????? [ 840c] %4lu: [ 8414] %-15s: [ 841c] ts=%8.8u [ 8428] tid=0x%0.8x [ 8438] *** ERROR (cannot format this entry) *** [ 8464] CB [ 8468] CTL [ 846c] GENERIC [ 8474] %2.2x [ 847c] - [ 8482] Could not locate DAPI trace block for handle 0x%8.8x [ 84b8] UNKNOWN [ 84c0] DAPI_CMD_UNDEFINED [ 84d4] DAPI_CMD_CONTROL_CALLBACK_REGISTER [ 84f8] DAPI_CMD_CARD_INSERT [ 8510] DAPI_CMD_CARD_REMOVE [ 8528] DAPI_CMD_CARD_PLUGIN [ 8540] DAPI_CMD_CARD_UNPLUG [ 8558] DAPI_CMD_SYSTEM_MIRRORING [ 8574] DAPI_CMD_SYSTEM_SYSTEM_IP_ADDRESS [ 8598] DAPI_CMD_SYSTEM_SYSTEM_MAC_ADDRESS [ 85bc] DAPI_CMD_SYSTEM_BROADCAST_CONTROL_MODE_SET [ 85e8] DAPI_CMD_SYSTEM_FLOW_CONTROL [ 8608] DAPI_CMD_SYSTEM_SNOOP_CONFIG [ 8628] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_CREATE [ 8650] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_DELETE [ 8678] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_VLAN_ADD [ 86a0] DAPI_CMD_SYSTEM_DOT1S_INSTANCE_VLAN_REMOVE [ 86cc] DAPI_CMD_SYSTEM_DOT1X_CONFIG [ 86ec] DAPI_CMD_SYSTEM_DOSCONTROL_CONFIG [ 8710] DAPI_CMD_SYSTEM_CPU_SAMPLE_PRIORITY [ 8734] DAPI_CMD_SYSTEM_SAMPLE_RANDOM_SEED [ 8758] DAPI_CMD_INTF_SAMPLE_RATE [ 8774] DAPI_CMD_SYSTEM_LOOP_PROTECTION_CONFIG [ 879c] DAPI_CMD_FRAME_UNSOLICITED_EVENT [ 87c0] DAPI_CMD_FRAME_SEND [ 87d4] DAPI_CMD_INTF_UNSOLICITED_EVENT [ 87f4] DAPI_CMD_INTF_STP_STATE [ 880c] DAPI_CMD_INTF_SPEED_CONFIG [ 8828] DAPI_CMD_INTF_AUTO_NEGOTIATE_CONFIG [ 884c] DAPI_CMD_INTF_LOOPBACK_CONFIG [ 886c] DAPI_CMD_INTF_ISOLATE_PHY_CONFIG [ 8890] DAPI_CMD_INTF_STATISTICS [ 88ac] DAPI_CMD_INTF_FLOW_CONTROL [ 88c8] DAPI_CMD_INTF_CABLE_STATUS_GET [ 88e8] DAPI_CMD_INTF_FIBER_DIAG_GET [ 8908] DAPI_CMD_INTF_DOT1S_STATE [ 8924] DAPI_CMD_INTF_DOT1X_STATUS [ 8940] DAPI_CMD_INTF_DOT1X_CLIENT_ADD [ 8960] DAPI_CMD_INTF_DOT1X_CLIENT_REMOVE [ 8984] DAPI_CMD_INTF_DOT1X_CLIENT_TIMEOUT [ 89a8] DAPI_CMD_INTF_DOT1X_CLIENT_BLOCK [ 89cc] DAPI_CMD_INTF_DOUBLEVLAN_TAG_CONFIG [ 89f0] DAPI_CMD_INTF_MAX_FRAME_SIZE_CONFIG [ 8a14] DAPI_CMD_INTF_DHCP_SNOOPING_CONFIG [ 8a38] DAPI_CMD_INTF_DYNAMIC_ARP_INSPECTION_CONFIG [ 8a64] DAPI_CMD_IPSG_INTF_CONFIG [ 8a80] DAPI_CMD_IPSG_INTF_STATS_GET [ 8aa0] DAPI_CMD_IPSG_CLIENT_ADD [ 8abc] DAPI_CMD_IPSG_CLIENT_DELETE [ 8ad8] DAPI_CMD_DOT3AH_CONFIG_ADD [ 8af4] DAPI_CMD_DOT3AH_CONFIG_REMOVE [ 8b14] DAPI_CMD_DOT3AH_REM_LB_CONFIG [ 8b34] DAPI_CMD_DOT3AH_REM_LB_ADD [ 8b50] DAPI_CMD_DOT3AH_REM_LB_ADD_UNI [ 8b70] DAPI_CMD_DOT3AH_REM_LB_DELETE [ 8b90] DAPI_CMD_INTF_BROADCAST_CONTROL_MODE_SET [ 8bbc] DAPI_CMD_INTF_DOT1S_BPDU_FILTERING [ 8be0] DAPI_CMD_INTF_DOT1S_BPDU_FLOOD [ 8c00] DAPI_CMD_INTF_CAPTIVE_PORTAL_CONFIG [ 8c24] DAPI_CMD_INTF_DOSCONTROL_CONFIG [ 8c44] DAPI_CMD_ADDR_UNSOLICITED_EVENT [ 8c64] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_ADD [ 8c88] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_MODIFY [ 8cb0] DAPI_CMD_ADDR_MAC_ADDRESS_ENTRY_DELETE [ 8cd8] DAPI_CMD_ADDR_MAC_FILTER_ADD [ 8cf8] DAPI_CMD_ADDR_MAC_FILTER_DELETE [ 8d18] DAPI_CMD_ADDR_AGING_TIME [ 8d34] DAPI_CMD_ADDR_FLUSH [ 8d48] DAPI_CMD_QVLAN_UNSOLICITED_EVENT [ 8d6c] DAPI_CMD_QVLAN_VLAN_CREATE [ 8d88] DAPI_CMD_QVLAN_VLAN_PORT_ADD [ 8da8] DAPI_CMD_QVLAN_VLAN_PORT_DELETE [ 8dc8] DAPI_CMD_QVLAN_VLAN_PURGE [ 8de4] DAPI_CMD_QVLAN_PORT_VLAN_LIST_SET [ 8e08] DAPI_CMD_QVLAN_PORT_CONFIG [ 8e24] DAPI_CMD_QVLAN_PORT_PRIORITY [ 8e44] DAPI_CMD_QVLAN_PORT_PRIORITY_TO_TC_MAP [ 8e6c] DAPI_CMD_QVLAN_VLAN_STATS_GET [ 8e8c] DAPI_CMD_QVLAN_VLAN_LIST_CREATE [ 8eac] DAPI_CMD_QVLAN_VLAN_LIST_PURGE [ 8ecc] DAPI_CMD_IPSUBNET_VLAN_CREATE [ 8eec] DAPI_CMD_IPSUBNET_VLAN_DELETE [ 8f0c] DAPI_CMD_MAC_VLAN_CREATE [ 8f28] DAPI_CMD_MAC_VLAN_DELETE [ 8f44] DAPI_CMD_GARP_GVRP [ 8f58] DAPI_CMD_GARP_GMRP [ 8f6c] DAPI_CMD_GVRP_GMRP_CONFIG [ 8f88] DAPI_CMD_GARP_GROUP_REG_MODIFY [ 8fa8] DAPI_CMD_GARP_GROUP_REG_DELETE [ 8fc8] DAPI_CMD_LOGICAL_INTF_CREATE [ 8fe8] DAPI_CMD_LOGICAL_INTF_DELETE [ 9008] DAPI_CMD_LAG_CREATE [ 901c] DAPI_CMD_LAG_PORT_ADD [ 9034] DAPI_CMD_LAG_PORT_DELETE [ 9050] DAPI_CMD_LAG_DELETE [ 9064] DAPI_CMD_AD_TRUNK_MODE_SET [ 9080] DAPI_CMD_LAG_HASHMODE_SET [ 909c] DAPI_CMD_ROUTING_ROUTE_ENTRY_ADD [ 90c0] DAPI_CMD_ROUTING_ROUTE_ENTRY_MODIFY [ 90e4] DAPI_CMD_ROUTING_ROUTE_ENTRY_DELETE [ 9108] DAPI_CMD_ROUTING_ROUTE_FORWARDING_CONFIG [ 9134] DAPI_CMD_ROUTING_ROUTE_BOOTP_DHCP_CONFIG [ 9160] DAPI_CMD_ROUTING_ROUTE_ICMP_REDIRECTS_CONFIG [ 9190] DAPI_CMD_ROUTING_ROUTE_MCAST_FORWARDING_CONFIG [ 91c0] DAPI_CMD_ROUTING_ROUTE_MCAST_IGMP_CONFIG [ 91ec] DAPI_CMD_ROUTING_ARP_ENTRY_ADD [ 920c] DAPI_CMD_ROUTING_ARP_ENTRY_MODIFY [ 9230] DAPI_CMD_ROUTING_ARP_ENTRY_DELETE [ 9254] DAPI_CMD_ROUTING_ARP_ENTRY_QUERY [ 9278] DAPI_CMD_ROUTING_ARP_UNSOLICITED_EVENT [ 92a0] DAPI_CMD_ROUTING_INTF_ADD [ 92bc] DAPI_CMD_ROUTING_INTF_MODIFY [ 92dc] DAPI_CMD_ROUTING_INTF_DELETE [ 92fc] DAPI_CMD_ROUTING_INTF_MCAST_FWD_CONFIG [ 9324] DAPI_CMD_ROUTING_INTF_LOCAL_MCASTADD [ 934c] DAPI_CMD_ROUTING_INTF_LOCAL_MCASTDELETE [ 9374] DAPI_CMD_ROUTING_INTF_VRID_ADD [ 9394] DAPI_CMD_ROUTING_INTF_VRID_DELETE [ 93b8] DAPI_CMD_ROUTING_INTF_IPV4_ADDR_SET [ 93dc] DAPI_CMD_ROUTING_INTF_MCAST_SNOOP_NOTIFY [ 9408] DAPI_CMD_ROUTING_INTF_MCAST_ADD [ 9428] DAPI_CMD_ROUTING_INTF_MCAST_DELETE [ 944c] DAPI_CMD_ROUTING_INTF_MCAST_COUNTERS_GET [ 9478] DAPI_CMD_ROUTING_INTF_MCAST_USE_GET [ 949c] DAPI_CMD_ROUTING_INTF_MCAST_PORT_ADD [ 94c4] DAPI_CMD_ROUTING_INTF_MCAST_PORT_DELETE [ 94ec] DAPI_CMD_ROUTING_INTF_MCAST_VLAN_PORT_MEMBER_UPDATE [ 9520] DAPI_CMD_ROUTING_INTF_MCAST_TTL_SET [ 9544] DAPI_CMD_ROUTING_INTF_MCAST_UNSOLICITED_EVENT [ 9574] DAPI_CMD_QOS_DIFFSERV_INST_ADD [ 9594] DAPI_CMD_QOS_DIFFSERV_INST_DELETE [ 95b8] DAPI_CMD_QOS_DIFFSERV_INTF_STAT_IN_GET [ 95e0] DAPI_CMD_QOS_DIFFSERV_INTF_STAT_OUT_GET [ 9608] DAPI_CMD_QOS_ACL_ADD [ 9620] DAPI_CMD_QOS_ACL_DELETE [ 9638] DAPI_CMD_QOS_ACL_RULE_COUNT_GET [ 9658] DAPI_CMD_QOS_SYS_ACL_ADD [ 9674] DAPI_CMD_QOS_SYS_ACL_DELETE [ 9690] DAPI_CMD_QOS_COS_IP_PRECEDENCE_TO_TC_MAP [ 96bc] DAPI_CMD_QOS_COS_IP_DSCP_TO_TC_MAP [ 96e0] DAPI_CMD_QOS_COS_INTF_TRUST_MODE_CONFIG [ 9708] DAPI_CMD_QOS_COS_INTF_CONFIG [ 9728] DAPI_CMD_QOS_COS_INTF_STATUS [ 9748] DAPI_CMD_QOS_COS_QUEUE_SCHED_CONFIG [ 976c] DAPI_CMD_QOS_COS_QUEUE_TAILDROP_CONFIG [ 9794] DAPI_CMD_QOS_COS_QUEUE_WRED_CONFIG [ 97b8] DAPI_CMD_QOS_VOIP_SESSION [ 97d4] DAPI_CMD_QOS_VOIP_PROFILE [ 97f0] DAPI_CMD_QOS_VOIP_STATS_GET [ 980c] DAPI_CMD_QOS_ISCSI_TARGET_PORT_ADD [ 9830] DAPI_CMD_QOS_ISCSI_TARGET_PORT_DELETE [ 9858] DAPI_CMD_QOS_ISCSI_CONNECTION_ADD [ 987c] DAPI_CMD_QOS_ISCSI_CONNECTION_REMOVE [ 98a4] DAPI_CMD_QOS_ISCSI_COUNTER_GET [ 98c4] DAPI_CMD_IPV6_ROUTE_ENTRY_ADD [ 98e4] DAPI_CMD_IPV6_ROUTE_ENTRY_MODIFY [ 9908] DAPI_CMD_IPV6_ROUTE_ENTRY_DELETE [ 992c] DAPI_CMD_IPV6_ROUTE_FORWARDING_CONFIG [ 9954] DAPI_CMD_IPV6_NEIGH_ENTRY_ADD [ 9974] DAPI_CMD_IPV6_NEIGH_ENTRY_MODIFY [ 9998] DAPI_CMD_IPV6_NEIGH_ENTRY_DELETE [ 99bc] DAPI_CMD_IPV6_NEIGH_ENTRY_QUERY [ 99dc] DAPI_CMD_IPV6_INTF_ADDR_ADD [ 99f8] DAPI_CMD_IPV6_INTF_ADDR_DELETE [ 9a18] DAPI_CMD_IPV6_INTF_STATS_GET [ 9a38] DAPI_CMD_TUNNEL_CREATE [ 9a50] DAPI_CMD_TUNNEL_DELETE [ 9a68] DAPI_CMD_TUNNEL_NEXT_HOP_SET [ 9a88] DAPI_CMD_L3_TUNNEL_ADD [ 9aa0] DAPI_CMD_L3_TUNNEL_DELETE [ 9abc] DAPI_CMD_L3_TUNNEL_MAC_ADDRESS_ADD [ 9ae0] DAPI_CMD_L3_TUNNEL_MAC_ADDRESS_DELETE [ 9b08] DAPI_CMD_DEBUG_SHELL [ 9b20] DAPI_CMD_VOICE_VLAN_DEVICE_ADD [ 9b40] DAPI_CMD_VOICE_VLAN_DEVICE_REMOVE [ 9b64] DAPI_CMD_VOICE_VLAN_COS_OVERRIDE [ 9b88] DAPI_CMD_VOICE_VLAN_AUTH [ 9ba4] DAPI_CMD_L2_TUNNEL_CREATE [ 9bc0] DAPI_CMD_L2_TUNNEL_DELETE [ 9bdc] DAPI_CMD_L2_DOT1AD_INTF_TYPE [ 9bfc] DAPI_CMD_L2_DOT1AD_TUNNEL_ACTION [ 9c20] DAPI_CMD_L2_DOT1AD_INTF_STATS [ 9c40] DAPI_CMD_L2_DOT1AD_APPLY_INTF_CONFIG_DATA [ 9c6c] DAPI_CMD_DOT1AD_ADD [ 9c80] DAPI_CMD_DOT1AD_DELETE [ 9c98] DAPI_CMD_DOT1AD_RULE_COUNT_GET [ 9cb8] DAPI_NUM_OF_CMDS [ 9cd7] $0<HTd`lx儀吀圀娀崀̀؀d ,8DP\ht怀挀昀椀氀漀ȀԀd(4@LXdp|爀d甀砀笀縀ĀЀ܀ [ 9de7] $d0<HT`lx脀萀蜀d言贀̀؀dd ,8DP\ht退錀阀餀鰀鼀ȀԀ(4@LXdp|ꈀꔀꠀ꬀글ĀЀ܀ [ 9ef7] $0<HT`lx넀됀뜀먀봀̀؀ ,d8DP\ddddht쀀쌀dddd였준찀케ȀԀ(4@LXdp|툀픀dapiTraceModeApply: Unable to apply dapi trace mode (%u) handle=0x%8.8x [ a048] enter [ a050] exit [ a058] %s - %d/%d/%d - %s %d [ a070] %s [ a074] Evt(%d) [ a07c] Recv [ a084] event %s - %d/%d/%d - %s %d [ a0a0] DOWN [ a0a8] UP [ a0ac] Addr LEARN [ a0b8] Addr AGED [ a0c7] |8DF [ a0ec] %d/%d/%d, %s, %0.8x, [ a104] [ a108] %0.2x [ a110] %0.2x%0.2x%0.2x%0.2x%0.2x%0.2x [ a130] %0.2x%0.2x %0.2x%0.2x [ a148] %0.2x%0.2x [ a154] D [ a158] S [ a15c] dapiTraceMaskSet(mask) [ a174] dapiTraceIntIfSet(unit,slot,port) [ a198] dapiTraceOneShotSet(enable) [ a1b8] Interface is in the form 0x0000uspp [ a1e0] DAPI_TRACE_DAPI_CTL_MASK %0.8x [ a204] DAPI_TRACE_GENERIC_MASK %0.8x [ a228] DAPI_TRACE_DAPI_CB_MASK %0.8x [ a24c] ****************************** [ a26c] DAPI_TRACE_FRAME_MASK %0.8x [ a290] dapiTraceFrameTypeSet(mask) [ a2b0] Receive: DROPPED %0.8x [ a2c8] Receive: To App %0.8x [ a2e0] Send %0.8x [ a2f8] Dapi Trace Mask = %0.8x [ a314] Dapi Trace FRAMES = %0.8x [ a330] Int = %d/%d/%d [ a348] oneShot = %d [ a358] osapiMalloc failed at %s : %d [ a378] dapiProfileInit [ a388] enabled [ a390] disabled [ a39c] Profiling is %s [ a3b0] Dapi cmd profiling is not enabled [ a3d5] Dapi Cmd Total time (ms) Number of invocations Maximum time (ms) [ a458] ---------------------------------------- -------------- -------------------- ------------------ [ a4d8] %-2d - %-55s %-8d %-8d %-8d [ a518] %-30s - Enable dapi cmds profiling [ a53c] dapiProfileModeSet(enable) [ a558] %-30s - Show dapi events profiling configuration [ a58c] dapiProfileConfigShow() [ a5a4] %-30s - Show profiling Information for cnfgr events [ a5dc] dapiProfileInfoShow() [ a5f4] USL: failed to init the L2 DBs [ a614] ../../../../andl/hapi/esw/stacking_binds/l7_usl_bcm.c [ a64c] %s:%d : [ a658] %d , [ a660] ../../../../andl/hapi/esw/base/base/phy_hapi.c [ a690] copper_preffered [ a6a7] x|Block 6 data %x [ a6cc] Block 7 data %x [ a6e0] Block 8 data %x [ a6f4] Block 9 data %x [ a708] Block A data %x [ a71c] topo_data_lock [ a732] ( ( ( ( (4 ( ( (Ā؀ [ a766]  ( 0 D#4#4#4#,#,#4#4#4#4#4#4#4#4#,#4#4#4#4#,#4#4#,#4#4#,#,#,#4#,#,esw [ a7f0] bcm_control [ a7fc] bcm_control subtype [ a810] auth_cntl [ a824] maclist [ a82c] ds_dp [ a834] ds_mib [ a83c] _ds_clfr_in_profile_action_xgs3: dpid=%d cfid=%d [ a870] _ds_clfr_out_profile_action_xgs3: dpid=%d cfid=%d [ a8ac] _ds_classifier_pre_install_xgs3: dpid=%d cfid=%d [ a8e0] _ds_classifier_pre_install_xgs3: dpid=%d cfid=%d %s [ a918] User assertion failed: "%s", at %s:%d [ a940] cf_ptr->g == 0 [ a950] esw_diffserv.c [ a960] cf_ptr->e == 0 [ a970] _ds_classifier_install_xgs3: dpid=%d cfid=%d [ a9a0] _ds_classifier_reinstall_xgs3: dpid=%d cfid=%d [ a9d0] cf_ptr->e != 0 [ a9e0] ds_classifier_create: dpid=%d cfid=%d [ aa08] prev_ptr != NULL [ aa1c] bcm_ds_classifier_update: dpid=%d cfid=%d [ aa48] bcm_ds_classifier_delete: dpid=%d cfid=%d [ aa74] bcm_ds_classifier_get: dpid=%d cfid=%d [ aa9c] bcm_ds_classifier_traverse: dpid=%d [ aac4] bcm_ds_scheduler_add: dpid=%d [ aae4] bcm_ds_datapath_install: dpid=%d [ ab08] bcm_ds_datapath_create: dpid=%d [ ab2c] bcm_ds_datapath_create_id: dpid=%d [ ab50] bcm_ds_datapath_delete: dpid=%d [ ab74] DS_MUTEX [ ab80] FP qualifier info [ ab94] FP qualifier config [ abab] 4 ,  | Ȁ Ԁ d H   $ , Ȁ ܀  field group entries array [ ac67] \ 0 H \ \ T T \ \Field policer [ ac98] Field stat array [ acac] Field stat values array [ acc4] Field stat entity [ acd8] Counter buffers [ aceb] x x x x x x x x h hFPF0 Table [ ad1c] FPF1 Table [ ad28] FPF2 Table [ ad34] FPF3 Table [ ad40] FPF4 Table [ ad4c] Doublewide Table [ ad60] FPFextn Table [ ad70] FPF Fixed Table [ ad80] Qualifier Info [ ad90] Group qual id [ ada0] Group qual offset [ adb4] field_entry_tcam_key [ adcc] field_entry_tcam_mask [ ade4] Data qualifier [ adf4] Data spec [ ae00] Data qualification control [ ae3b] @ [ ae48] UDF spec [ ae54] fp_meter_pool [ ae64] fp_meters_map [ ae74] fp_counter_map [ ae84] FP pipeline X counters [ ae9c] array of entry pointers [ aeb4] stage slices info [ aec8] FP stage info [ aed8] User assertion failed: "%s", at %s:%d [ af00] fg != NULL && field != NULL [ af1c] esw_field.c [ af28] field group [ af36] h h h h̀ h܀ h h i i h i, i 0 [ b21b] |      [ b233] 4 h p x      *L *Ā *Ѐ *؀ * +8 + + +Ā +̀ +Ԁ +܀ 2 3 3 3 2 3 3 3 2 3 3$ 3$ 2 3 3$ 3, :Ā : ; [ b2d2] ; ; C C C C C dP dp dp dx d d d dP d ~x ~ ~ ~ ~ ~  @ H P X `bcm_config_lock [ b353] ( [ b357] / [ b35b] [ b35f] ! [ b363] " [ b367] # [ b36b] $ [ b36f] % [ b373] & [ b377] ' [ b37b] ) [ b37f] * [ b383] + [ b387] , [ b38a] [ b38e] [ b392] ! [ b396] ! User assertion failed: "%s", at %s:%d [ b3c0] (port / 4) < (bcm_port_t)(sizeof(map_r)/sizeof(map_r[0])) [ b3fc] esw_init.c [ b408] skip_l2_vlan_init [ b41c] SIMULATION: skipped init filter [ b440] SIMULATION: skipped init field [ b460] SIMULATION: skipped init diffserv [ b484] SIMULATION: skipped init auth [ b4a4] SIMULATION: skipped init l3 [ b4c4] SIMULATION: skipped init ipmc [ b4e4] SIMULATION: skipped init trunk [ b504] SIMULATION: skipped init mcast [ b524] SIMULATION: skipped init mpls [ b544] SIMULATION: skipped init mim [ b564] SIMULATION: skipped init subport [ b588] SIMULATION: skipped init wlan [ b5a8] SIMULATION: skipped init oam [ b5c8] SIMULATION: skipped init qos [ b5e8] SIMULATION: forced to skip init l2 and vlan [ b618] bcm_init: %s took %d usec [ b634] PORT [ b63c] L2 [ b640] STG [ b644] VLAN [ b64c] TRUNK [ b654] COSQ [ b65c] MCAST [ b664] LINKSCAN [ b670] STAT [ b678] STACK [ b680] FIELD [ b688] DIFFSERV [ b694] MIRROR [ b69c] TX [ b6a0] RX [ b6a4] AUTH [ b6ac] TIME [ b6b4] OAM [ b6b8] bcm_l2_lock [ b6c4] l2xmsg_thread_usec [ b6d8] l2: %sVLAN=0x%03x MAC=0x%02x%02x%02x%02x%02x%02x%s [ b70c] l2delete_chunks [ b71c] l2 traverse [ b728] skip_L2_USER_ENTRY [ b73c] down [ b744] up [ b748] Port %s: Link: Current %s, New %s Fault: Current %s, New %s Notify %s, Logical link %s [ b7a4] Half Duplex [ b7b0] Full Duplex [ b7bc] Copper [ b7c4] Fiber [ b7cc] Port %s: link up (%dMb %s %s) [ b7ec] Link up processing took %d usecs [ b810] Port %s: logical link notification %s [ b838] Port %s: remote fault cleared [ b858] Port %s: remote fault detected [ b878] Port %s: link down [ b88c] Link down processing took %d usecs [ b8b0] Port %s: linkscan ASF update failed: %s [ b8dc] Port %s: bcm_port_info_get failed: %s [ b904] Port %s: soc_link_fwd_set failed: %s [ b92c] Port %s: Failed to read remote fault status: %s [ b960] Port %s: bcm_port_update failed: %s [ b988] Port %s: Failed to recover link status: %s [ b9b4] HW link p=%d %s [ b9c8] User assertion failed: "%s", at %s:%d [ b9f0] SOC_PORT_VALID(unit, port) [ ba0c] esw_link.c [ ba18] Port %s: restored [ ba2c] Port %s: temporarily removed from linkscan [ ba58] Linkscan interrupt unit %d [ ba74] Linkscan starting on unit %d [ ba94] bcm_linkscan_maxerr [ baa8] Linkscan exiting [ babc] Failed to register handler: %s [ badc] Failed to clear forwarding ports: %s [ bb04] bcm_linkscan_errdelay [ bb1c] link_control [ bb2c] bcm_link_LOCK [ bb3c] bcm_link_SLEEP [ bb4c] phy_sgmii_autoneg [ bb60] bcmLINK.%d [ bb6c] linkscan_thread_pri [ bb80] %s: Thread did not start [ bb9c] %s: Thread did not exit [ bbb8] bcm_linkscan_register [ bbd0] ERROR: mbcm_init unit %d: unsupported chip type [ bc04] Meter module [ bc14] Mirror destinations [ bc28] Egress MTP indexes [ bc3c] Ingress MTP indexes [ bc50] Meter module mutex [ bc64] failed updating default VLAN ID in VLAN_PROTOCOL_DATA: %s [ bca0] vdv_info [ bcac] bcm_port_info [ bcbc] User assertion failed: "%s", at %s:%d [ bce4] PORT(unit, port).meter_cfid != -1 [ bd08] esw_port.c [ bd14] port_init_speed [ bd24] port_init_duplex [ bd38] port_init_adv [ bd48] port_init_autoneg [ bd5c] bcm_port_init: unit %d [ bd74] Error unit %d: Failed software port init: %s [ bda4] Error unit %d: Failed port probe: %s [ bdcc] Probed ports okay: %s of %s [ bdec] Warning: Unit %d : Failed to set %s port default TPID: %s [ be28] bcm_port_init: unit %d port %s [ be48] Warning: Unit %d Port %s: Failed to enable JAM %s [ be7c] Warning: Unit %d Port %s: Failed to %s port: %s [ beb0] disable [ beb8] Warning: Unit %d Port %s: Failed to configure initial settings: %s [ befc] Warning: Unit %d Port %s: Failed to set initial mode: %s [ bf38] unit < BCM_MAX_NUM_UNITS [ bf54] bcm_port_clear: unit %d port %s [ bf78] Init port %d PHY... [ bf90] Init port %d MAC... [ bfa8] Unit %d Port %s: Failed to initialize MAC: %s [ bfd8] Unit %d Port %s: Failed to probe MAC: %s [ c004] Unit %d Port %s: Failed to initialize PHY: %s [ c034] Unit %d Port %s: Failed to probe PHY: %s [ c060] Port probe failed on port %s [ c093] ( \    $ T h h h h h h h h h h h hinvalid port [ c138] driver not initialized [ c157] * [ c15b] + [ c163] , [ c167] - [ c16f] * [ c173] + [ c17b] , [ c17f] -max_p >= 0 [ c18c] pbmp32 [ c194] PORT(unit, port).meter_cfid == -1 [ c1bb] |      L        Ԁ  8  `    Ԁ  ,                                      ؀ 4 4 4 4 4 p d Ѐ < 4 4 4 4 8 4 L 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 $ $  ̀ $  $ $ $ $ , D \ t $ 4  Ѐ 4 H \ p 4 D [ c48b] |   Ѐ       User assertion failed: "%s", at %s:%d [ c4e8] bucket_size <= METER_BUCKETSIZE_MAX [ c50c] esw_rate.c [ c52b] ( < t ۔ ۜ ۤ ۬ ۴ bcm_esw_lock [ c598] bcm_esw_stk_cb [ c5c3] ( Ā Ā Ā Ā [ c5f0] ModPort Profile Mem [ c60f] |̀̀|؀؀    bcm_stat_pbmp [ c65c] bcm_stat_interval [ c670] bcm_stat_flags [ c680] bcm_stat_jumbo [ c690] device extra counters [ c6a8] bcm extra counters [ c6bc] User assertion failed: "%s", at %s:%d [ c6e4] 0 [ c6e8] esw_stat.c [ c6f6] """Ȁ"Ԁ"""####(#4#@#L#X#d#p#|####$#؀#؀#؀#؀#؀#؀#؀#؀#؀#؀#؀#؀"""Ȁ"Ԁ"""####(#4#@#L#X#d#p$x$##؀#̀#؀$ $D$$$%%%H#؀%#؀#؀"x"x"x"x"x"x"x"x"x"x"x"xbcm_stat_get: Statistic not supported: %d [ c86a] gЀ-568 .0o;?@B<C$C`D DE0F [ c8ae] FXGԀH,HJKTL<LLMHNxOP؀RS8T4UU4VX$clX|[cclcĀd.0dtd̀e$.0e|eԀ.0fpfȀg gxgЀh,oLoopsxsstu u|vdooLssxvw`xx؀yzĀ{|}~~h~pȀ xЀ [ c9ef] 0H`xPĀ8 |d؀H0.0.0.0 [ ca67] D_bcm_stat_hg_get: Statistic not supported: %d [ ca9f] <̀P XLd\DȀXpȀH$H<D܀ ԀTTl؀D܀Ԁ<ĔDŜLƤ,D\tnjǤǼԀ xPɼ(ʔ [ cc57] l؀D̰͈`̀8Ϥ_bcm_stat_xe_get: Statistic not supported: %d [ ccd3] 4Ā $ĀݸTެĀ`T߬ dL㨀 [ cd43] `xЀ츀ĀP,ĀPĀĀĀĀĀĀĀĀDL [ cdb7] $ xp܀ [ cdf7] < Ā  , D \ t    T   \   d  Ԁ  D | T,p܀H dЀ<ĀĀUser assertion failed: "%s", at %s:%d [ cee0] vid != BCM_VLAN_INVALID [ cef8] esw_stg.c [ cf18] bcm_stg_vlan_list [ cf2c] STG-vnext [ cf38] STG-vfirst [ cf44] STG-bitmap [ cf50] bcm_stg_list [ cf60] n < *count [ cf6e] 9 :::Ā:̀:Ԁ=t=====CC̀CCD [ cfb2] DD4D@DLDdDlDtDDDDDDDĀD̀DԀDDDEE EE$E,E4EDELETEECCCCD4ECDdEG(G0FFGpGxFGF@GGG G(G0G8G@GHGPGXG`GhGpGxGGGGGGGGGGȀH HFFFFFHFGH$HH؀HI [ d10e] III I(I0IJLJTJ`JhJpJxJJN$P QQR\V,V,V,VpV̀XHXHXXXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXHXdW؀XXXXX\\\ZXXXXXXZ[XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ d31a] [,XXXXXXXXXXXXXXXXXXXXX[HX\,\,[`XXX [ d392] [XXXXXXXXXX[\\\\XXXXXXXXXXXXXXXXXXXXXX[[[[[[[[[XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\\,]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]](]]]]]```_l]]]]]]__]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]P_]]]]]]]]]]]]]]]]]]]]]_̀]``_]]]P`]]]]]]]]]]`,````]]]]]]]]]]]]]]]]]]]]]]`d`d`d`d`d`d`d`d`d]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]``Time module [ d8d0] Time Interfaces [ d8e0] Time Interface User Callback [ d900] Time mutex [ d90c] trunk_extend [ d91c] trunk_priv [ d928] Active vlans bitmap [ d93c] vlan_list [ d948] User assertion failed: "%s", at %s:%d [ d970] !list_all || i == count [ d988] esw_vlan.c [ d994] vlandelete_chunks [ d9a8] vlan translate traverse [ d9c0] vlan_subnet [ d9f3] T||\ꈀ꤀Ѐ\넀넀DL쌀ȀxЀt@ttﴀԀPĀ,Ȁ [ da8f] 8Field qualifiers [ dab0] trunk_extend [ dac2] }|~}~$~4~D~T~d~t~~~~~Ā~Ԁ~4<D<H,h}}}x̀0<}}(h܀}}}}}}t<HTT}}}}}}}}}}}}}}}}}}}}}}}}܀,}}}}8}}}}}}}}}}}}}}}}}}}}||}}}}}}}}}}}}}}}}} [ dcca] 2 [ dcce] 2 [ dcd2] 3 [ dcd6] 3 [ dcda] 3 [ dcde] 3 [ dce2] 3" [ dce6] 3* [ dcea] 32 [ dcee] 3: [ dcf2] 2 [ dcf6] 2 [ dcfa] 2 [ dcfe] 2 [ dd02] 2 [ dd06] 2 [ dd0a] 2 [ dd0e] 2 [ dd12] 3 [ dd16] 3 [ dd1a] 3 [ dd1e] 3 [ dd22] 3& [ dd26] 3. [ dd2a] 36 [ dd2e] 3> [ dd32] 2 [ dd36] 2 [ dd3a] 2 [ dd3e] 2 [ dd42] 2 [ dd46] 2Ѐ܀ [ dd83] , [ dd8b] || ||||||||||||,,,pp      TTЀDll                        $$Phh                                         Ѐ܀܀    ddddd|Ā̀Ԁ܀ Pp @h8Ѐ<H`tȀȀȀȀȀtȀȀȀȀԀdHPBCM L2X MAC blocking info [ e2c0] WARNING: function %s not implemented for Firebolt [ e2f4] bcm_fb_meter_init [ e308] bcm_fb_meter_create [ e31c] bcm_fb_meter_delete [ e330] bcm_fb_meter_delete_all [ e348] bcm_fb_meter_get [ e35c] bcm_fb_meter_set [ e370] bcm_fb_ffppacketcounter_set [ e38c] bcm_fb_ffppacketcounter_get [ e3a8] bcm_fb_ffpcounter_init [ e3c0] bcm_fb_ffpcounter_create [ e3dc] bcm_fb_ffpcounter_delete [ e3f8] bcm_fb_ffpcounter_delete_all [ e418] bcm_fb_ffpcounter_set [ e430] bcm_fb_ffpcounter_get [ e448] L2MC [ e453] c [ e457] k [ e466] /Mod_Port_Trunk [ e478] _xgs3_trunk_swfail [ e48c] Cached ingress outer TPIDs [ e4a8] outer_tpid_lock [ e4b8] Cached VLAN Profile Table [ e4d4] SIMULATION: skipped VLAN table clear (assuming hardware did it) [ e518] vlan tbl dma [ e528] vlan trans cache [ e53c] Field qualifiers [ e553] x܀ LL\LLLLLLLLLLLLLLLLLLLLL\\\LLLL\\L\LLLLLLLLLLLLLLLLLL\\\\L\\\\\\ddddd\ddddddddLLLLL\\\\L\\\\\\ddddd\ddddddddLLL\\\\\\\\\\\\\\LLLLL\\\\L\\\\\\\ddddd\dddddddd̀̀D̀̀̀̀̀̀̀̀̀̀̀̀PPP888DDDDDD܀܀<TT```````ЀЀDDDD4DDDDDDxxxxxDxxxxxxxxDDDDDDDDDD\\\\\D\\\\\\\\DDDDDDDDDDDDDDDDD  DDDD@DDDDDDDxxxxxDxxxxxxxxUser assertion failed: "%s", at %s:%d [ ea78] fg != NULL [ ea84] raptor_field.c [ ea94] tcam_idx <= soc_mem_index_max(unit, FP_TCAMm) [ eac4] tcam_idx >= soc_mem_index_min(unit, FP_TCAMm) [ eaf4] f_ent != NULL [ eb07] C [ eb0b] D [ eb0f] E [ eb13] B [ eb1b] [ eb1f] @ [ eb23] ` [ eb27] C [ eb2b] D [ eb2f] E [ eb33] B [ eb3b] [ eb3f] @ [ eb43] `t_entry != NULL [ eb57] < Ȁ$,4<Htcam_idx <= soc_mem_index_max(unit, FP_POLICY_TABLEm) [ ebac] tcam_idx >= soc_mem_index_min(unit, FP_POLICY_TABLEm) [ ebe6] P | !!D&@!p!" [ ec0a] ","X"""܀&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@##0##Ȁ#&@$$D$$Ѐ$% %L%t&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@&@%%Ā%&&@&H&p&Ԁ&'$'L'x'dԀ$<PhĀ܀ 8@XĀhĀ(̀DЀ $Xl̀4H\t bcmx_uport_add [ ef80] bcmx_devport_add [ ef94] bcmx_port_info_add [ efa8] bcmx_init [ efb4] bcmx_l2_conflict_get [ efcc] bcmx_l2_notify [ efdc] bcmx_l2_addr_reg [ eff0] bcmx_l2_notify [ f000] bcmx_ls_reg [ f00c] lplist [ f014] lpports [ f01c] bcmx port stat [ f02c] bcmx_rx_reg [ f03a] owner == sal_thread_self() [ f178] sem [ f180] >. &֕sal_strdup [ f194] sal_strndup [ f1a0] 0123456789ABCDEF [ f1b4] 0123456789abcdef [ f1c8] ? [ f1d0] @$ [ f1d8] A [ f1e7] ,,,,,,,,,Ȁ, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,dDԀD| [ f468] User assertion failed: "%s", at %s:%d [ f490] avl->count > 0 [ f4a0] avl.c [ f4a8] avl->count == 0 [ f4b8] avl [ f4bc] avl_ent [ f4c4] Ok [ f4c8] Internal error [ f4d8] Out of memory [ f4e8] Invalid unit [ f4f8] Invalid parameter [ f50c] Table empty [ f518] Table full [ f524] Entry not found [ f534] Entry exists [ f544] Operation timed out [ f558] Operation still running [ f570] Operation failed [ f584] Operation disabled [ f598] Invalid identifier [ f5ac] No resources for operation [ f5c8] Invalid configuration [ f5e0] Feature unavailable [ f5f4] Feature not initialized [ f60c] Invalid port [ f61c] Unknown error [ f62c] User assertion failed: "%s", at %s:%d [ f654] size < (int)sizeof(tmp) [ f66c] util.c [ f674] 0123456789abcdef [ f688] T [ f68c] G [ f690] M [ f694] k [ f698] K [ f6a0] PCi [ f6a4] SChan [ f6ac] SOCMEM [ f6b4] SYMTAB [ f6bc] VERInet [ f6c4] L3 [ f6c8] INTr [ f6d0] ARL [ f6d4] ARLMon [ f6dc] L2table [ f6e4] DMA [ f6e8] POrt [ f6f0] PAcket [ f6f8] TX [ f6fc] RCLOAD [ f704] TEsts [ f70c] VERbose [ f714] MIIm [ f71c] PHY [ f720] END [ f724] LInk [ f72c] ERRor [ f734] CounTeR [ f73c] IP [ f740] STP [ f744] VLAN [ f74c] RX [ f750] WARN [ f758] I2C [ f75c] REG [ f760] MEM [ f764] STK [ f768] BCM56300_A0 [ f774] BCM56301_A0 [ f780] BCM56302_A0 [ f78c] BCM56303_A0 [ f798] BCM56304_A0 [ f7a4] BCM56305_A0 [ f7b0] BCM56306_A0 [ f7bc] BCM56307_A0 [ f7c8] BCM56308_A0 [ f7d4] BCM56309_A0 [ f7e0] BCM56300_A1 [ f7ec] BCM56301_A1 [ f7f8] BCM56302_A1 [ f804] BCM56303_A1 [ f810] BCM56304_A1 [ f81c] BCM56305_A1 [ f828] BCM56306_A1 [ f834] BCM56307_A1 [ f840] BCM56308_A1 [ f84c] BCM56309_A1 [ f858] BCM53300_A0 [ f864] BCM53301_A0 [ f870] BCM53302_A0 [ f87c] BCM56300_B0 [ f888] BCM56301_B0 [ f894] BCM56302_B0 [ f8a0] BCM56303_B0 [ f8ac] BCM56304_B0 [ f8b8] BCM56305_B0 [ f8c4] BCM56306_B0 [ f8d0] BCM56307_B0 [ f8dc] BCM56308_B0 [ f8e8] BCM56309_B0 [ f8f4] BCM56300_B1 [ f900] BCM56301_B1 [ f90c] BCM56302_B1 [ f918] BCM56303_B1 [ f924] BCM56304_B1 [ f930] BCM56305_B1 [ f93c] BCM56306_B1 [ f948] BCM56307_B1 [ f954] BCM56308_B1 [ f960] BCM56309_B1 [ f96c] BCM56310_A0 [ f978] BCM56311_A0 [ f984] BCM56312_A0 [ f990] BCM56313_A0 [ f99c] BCM56314_A0 [ f9a8] BCM56315_A0 [ f9b4] BCM56316_A0 [ f9c0] BCM56317_A0 [ f9cc] BCM56318_A0 [ f9d8] BCM56319_A0 [ f9e4] BCM56500_A0 [ f9f0] BCM56501_A0 [ f9fc] BCM56502_A0 [ fa08] BCM56503_A0 [ fa14] BCM56504_A0 [ fa20] BCM56505_A0 [ fa2c] BCM56506_A0 [ fa38] BCM56507_A0 [ fa44] BCM56508_A0 [ fa50] BCM56509_A0 [ fa5c] BCM56500_A1 [ fa68] BCM56501_A1 [ fa74] BCM56502_A1 [ fa80] BCM56503_A1 [ fa8c] BCM56504_A1 [ fa98] BCM56505_A1 [ faa4] BCM56506_A1 [ fab0] BCM56507_A1 [ fabc] BCM56508_A1 [ fac8] BCM56509_A1 [ fad4] BCM56500_B0 [ fae0] BCM56501_B0 [ faec] BCM56502_B0 [ faf8] BCM56503_B0 [ fb04] BCM56504_B0 [ fb10] BCM56505_B0 [ fb1c] BCM56506_B0 [ fb28] BCM56507_B0 [ fb34] BCM56508_B0 [ fb40] BCM56509_B0 [ fb4c] BCM56500_B1 [ fb58] BCM56501_B1 [ fb64] BCM56502_B1 [ fb70] BCM56503_B1 [ fb7c] BCM56504_B1 [ fb88] BCM56505_B1 [ fb94] BCM56506_B1 [ fba0] BCM56507_B1 [ fbac] BCM56508_B1 [ fbb8] BCM56509_B1 [ fbc4] BCM56500_B2 [ fbd0] BCM56501_B2 [ fbdc] BCM56502_B2 [ fbe8] BCM56503_B2 [ fbf4] BCM56504_B2 [ fc00] BCM56505_B2 [ fc0c] BCM56506_B2 [ fc18] BCM56507_B2 [ fc24] BCM56508_B2 [ fc30] BCM56509_B2 [ fc3c] BCM56218_A0 [ fc48] BCM53610_A0 [ fc54] BCM56219_A0 [ fc60] BCM56218R_A0 [ fc70] BCM56219R_A0 [ fc80] BCM56214_A0 [ fc8c] BCM56215_A0 [ fc98] BCM56214R_A0 [ fca8] BCM56215R_A0 [ fcb8] BCM56216_A0 [ fcc4] BCM56217_A0 [ fcd0] BCM56212_A0 [ fcdc] BCM56213_A0 [ fce8] BCM53718_A0 [ fcf4] BCM53714_A0 [ fd00] BCM53716_A0 [ fd0c] BCM56018_A0 [ fd18] BCM56014_A0 [ fd24] BCM56218_A1 [ fd30] BCM53610_A1 [ fd3c] BCM56219_A1 [ fd48] BCM56218R_A1 [ fd58] BCM56219R_A1 [ fd68] BCM56214_A1 [ fd74] BCM56215_A1 [ fd80] BCM56214R_A1 [ fd90] BCM56215R_A1 [ fda0] BCM56216_A1 [ fdac] BCM56217_A1 [ fdb8] BCM56212_A1 [ fdc4] BCM56213_A1 [ fdd0] BCM53718_A1 [ fddc] BCM53714_A1 [ fde8] BCM53716_A1 [ fdf4] BCM56018_A1 [ fe00] BCM56014_A1 [ fe0c] BCM56218_A2 [ fe18] BCM56219_A2 [ fe24] BCM56218R_A2 [ fe34] BCM56219R_A2 [ fe44] BCM56214_A2 [ fe50] BCM56215_A2 [ fe5c] BCM56214R_A2 [ fe6c] BCM56215R_A2 [ fe7c] BCM56216_A2 [ fe88] BCM56217_A2 [ fe94] BCM56212_A2 [ fea0] BCM56213_A2 [ feac] BCM53718_A2 [ feb8] BCM53714_A2 [ fec4] BCM53716_A2 [ fed0] BCM56018_A2 [ fedc] BCM56014_A2 [ fee8] BCM56510_A0 [ fef4] BCM56511_A0 [ ff00] BCM56512_A0 [ ff0c] BCM56513_A0 [ ff18] BCM56514_A0 [ ff24] BCM56516_A0 [ ff30] BCM56517_A0 [ ff3c] BCM56518_A0 [ ff48] BCM56519_A0 [ ff54] BCM56620_A0 [ ff60] BCM56620_A1 [ ff6c] BCM56620_B0 [ ff78] BCM56620_B1 [ ff84] BCM56624_A0 [ ff90] BCM56624_A1 [ ff9c] BCM56624_B0 [ ffa8] BCM56624_B1 [ ffb4] BCM56626_A0 [ ffc0] BCM56626_A1 [ ffcc] BCM56626_B0 [ ffd8] BCM56626_B1 [ ffe4] BCM56628_A0 [ fff0] BCM56628_A1 [ fffc] BCM56628_B0 [ 10008] BCM56628_B1 [ 10014] BCM56629_A0 [ 10020] BCM56629_A1 [ 1002c] BCM56629_B0 [ 10038] BCM56629_B1 [ 10044] BCM56680_A0 [ 10050] BCM56680_A1 [ 1005c] BCM56680_B0 [ 10068] BCM56680_B1 [ 10074] BCM56684_A0 [ 10080] BCM56684_A1 [ 1008c] BCM56684_B0 [ 10098] BCM56684_B1 [ 100a4] BCM56686_B0 [ 100b0] BCM56686_B1 [ 100bc] BCM56224_A0 [ 100c8] BCM56225_A0 [ 100d4] BCM56226_A0 [ 100e0] BCM56227_A0 [ 100ec] BCM56228_A0 [ 100f8] BCM56229_A0 [ 10104] BCM56024_A0 [ 10110] BCM56025_A0 [ 1011c] BCM53724_A0 [ 10128] BCM53726_A0 [ 10134] BCM56224_B0 [ 10140] BCM56225_B0 [ 1014c] BCM56226_B0 [ 10158] BCM56227_B0 [ 10164] BCM56228_B0 [ 10170] BCM56229_B0 [ 1017c] BCM56024_B0 [ 10188] BCM56025_B0 [ 10194] BCM53724_B0 [ 101a0] BCM53726_B0 [ 101ac] BCM53312_A0 [ 101b8] BCM53312_B0 [ 101c4] BCM53313_A0 [ 101d0] BCM53313_B0 [ 101dc] BCM53314_A0 [ 101e8] BCM53314_B0 [ 101f4] UNKNOWN [ 101fc] ERROR: ROBO devices should not be here ! [ 10228] CM: Base=%p [ 10238] %-8s%-16s%-16s%-16s [ 10250] Index [ 10258] Chip [ 10260] Chip Dev/Rev [ 10270] Driver Dev/Rev [ 10280] %-8d%-16s%04x %02x %04x %02x [ 102a8] schan [ 102b0] general [ 102b8] port [ 102c0] cos [ 102c4] cpu [ 102c8] pci_cfg [ 102d0] phy [ 102d4] spi [ 102d8] mem_word [ 102e4] mem_hword [ 102f0] mem_byte [ 102fc] invalid [ 10304] BCM5670_A0 [ 10310] BCM5673_A0 [ 1031c] BCM5690_A0 [ 10328] BCM5665_A0 [ 10334] BCM5695_A0 [ 10340] BCM5675_A0 [ 1034c] BCM5674_A0 [ 10358] BCM5665_B0 [ 10364] BCM56601_A0 [ 10370] BCM56601_B0 [ 1037c] BCM56601_C0 [ 10388] BCM56602_A0 [ 10394] BCM56602_B0 [ 103a0] BCM56602_C0 [ 103ac] BCM56504_A0 [ 103b8] BCM56504_B0 [ 103c4] BCM56102_A0 [ 103d0] BCM56304_B0 [ 103dc] BCM56112_A0 [ 103e8] BCM56314_A0 [ 103f4] BCM5650_C0 [ 10400] BCM56800_A0 [ 1040c] BCM56218_A0 [ 10418] BCM56514_A0 [ 10424] BCM56624_A0 [ 10430] BCM56624_B0 [ 1043c] BCM56680_A0 [ 10448] BCM56680_B0 [ 10454] BCM56224_A0 [ 10460] BCM56224_B0 [ 1046c] BCM53314_A0 [ 10478] BCM56725_A0 [ 10484] BCM56820_A0 [ 10490] BCM56634_A0 [ 1049c] BCM56524_A0 [ 104a8] BCM56685_A0 [ 104b4] BCM5324_A0 [ 104c0] BCM5324_A1 [ 104cc] BCM5324_A2 [ 104d8] BCM5396_A0 [ 104e4] BCM5389_A0 [ 104f0] BCM5398_A0 [ 104fc] BCM5348_A0 [ 10508] BCM5397_A0 [ 10514] BCM5347_A0 [ 10520] BCM5395_A0 [ 1052c] BCM53242_A0 [ 10538] BCM53262_A0 [ 10544] BCM53115_A0 [ 10550] BCM53118_A0 [ 1055c] BCM4713_A0 [ 10568] QE2000_A0 [ 10574] BME3200_A0 [ 10580] BME3200_B0 [ 1058c] BCM88130_A0 [ 10598] BCM88130_B0 [ 105a4] BCM88020_A0 [ 105b0] BCM88020_A1 [ 105bc] BCM88025_A0 [ 105c8] BCM88230_A0 [ 105d4] BCM5670 [ 105dc] BCM5673 [ 105e4] BCM5690 [ 105ec] BCM5665 [ 105f4] BCM5695 [ 105fc] BCM5675 [ 10604] BCM5674 [ 1060c] BCM56601 [ 10618] BCM56602 [ 10624] BCM56504 [ 10630] BCM56102 [ 1063c] BCM56304 [ 10648] BCM5650 [ 10650] BCM56800 [ 1065c] BCM56218 [ 10668] BCM56112 [ 10674] BCM56314 [ 10680] BCM56514 [ 1068c] BCM56624 [ 10698] BCM56680 [ 106a4] BCM56224 [ 106b0] BCM53314 [ 106bc] BCM56725 [ 106c8] BCM56820 [ 106d4] BCM56634 [ 106e0] BCM56524 [ 106ec] BCM56685 [ 106f8] BCM5324 [ 10700] BCM5396 [ 10708] BCM5389 [ 10710] BCM5398 [ 10718] BCM5348 [ 10720] BCM5397 [ 10728] BCM5347 [ 10730] BCM5395 [ 10738] BCM53242 [ 10744] BCM53262 [ 10750] BCM53115 [ 1075c] BCM53118 [ 10768] BCM4713 [ 10770] QE2000 [ 10778] BME3200 [ 10780] BCM88130 [ 1078c] BCM88020 [ 10798] BCM88230 [ 107a4] User assertion failed: "%s", at %s:%d [ 107cc] 0 [ 107d0] common.c [ 107dc] #%%d = 0x%%0%dx%%s [ 107f4] Reserved [ 10800] [%d:%d] [ 1080c] #%d [ 10810] .%d [ 10814] .#%d [ 1081c] * [ 10820] (%d) [ 10828] Invalid Address [ 10838] finfop [ 10840] cmic_regtest_skip [ 1085c] soc_counter_attach: %d bytes/port, %d ports, %d ctrs/port, %d ports with %d 32bit ctrs, %d ports with %d 64bit ctrs [ 108d4] cntr_non_dma [ 108e4] cntr_dma_buf [ 108f4] cntr_hw_val [ 10900] cntr_sw_val [ 1090c] cntr_delta [ 10918] User assertion failed: "%s", at %s:%d [ 10940] SOC_CONTROL(unit)->counter_map[port]->cmap_base [ 10970] counter.c [ 1097c] SOC_CONTROL(unit)->counter_map[port] [ 109a4] n_bytes > 0 [ 109b0] soc_counter_attach: unit %d: unexpected chip type [ 109e4] SOC_UNIT_VALID(unit) [ 109fc] soc_counter_autoz: unit=%d enable=%d [ 10a24] cntr get %s port=%d port_index=%d vptr=%p val=0x%08x_%08x [ 10a60] A. [ 10a68] ?6C-A [ 10a78] ? [ 10a80] soc_counter_collect32: unit=%d discard=%d [ 10aac] soc_counter_collect32: ctr %d => %u [ 10ad4] manual [ 10adc] DMA [ 10ae0] soc_counter_collect32: unit %d, port%d: suspicious %s counter read (Counter%d) [ 10b30] soc_counter_collect64: unit=%d discard=%d [ 10b5c] soc_counter_collect64: ctr %d => 0x%08x_%08x [ 10b8c] soc_counter_collect64: unit %d, port%d: suspicious %s counter read (Counter%d) [ 10bdc] ing_c_cnt = %d egr_c_cnt = %d gmac_c_cnt = %d xmac_c_cnt = %d ing_pstage = %d egr_pstage = %d ing_blkoff = %d egr_blkoff = %d [ 10c5c] 0 [ 10c60] soc_counter_thread: unit=%d [ 10c80] cdma_timeout_usec [ 10c94] soc_counter_thread: sleep %d [ 10cb4] soc_counter_thread: Operation failed; exiting [ 10ce4] soc_counter_thread: exiting [ 10d04] soc_counter_thread: trigger DMA [ 10d28] soc_counter_thread: DMA iter done [ 10d4c] soc_counter_thread: unit = %d DMA Error [ 10d78] soc_ctr_maxerr [ 10d88] soc_counter_thread: Too many errors [ 10db0] soc_counter_thread: collect64 failed: %s [ 10ddc] soc_counter_thread: collect32 failed: %s [ 10e08] soc_counter_thread: DMA did not finish buf32=%p [ 10e3c] soc_counter_start: unit=%d flags=0x%x interval=%d pbmp=%s [ 10e78] counter_trigger [ 10e88] counter_intr [ 10e98] soc_counter_start: sem create failed [ 10ec0] bcmCNTR.%d [ 10ecc] counter_thread_pri [ 10ee0] soc_counter_start: thread create failed [ 10f0c] soc_counter_start: complete [ 10f2c] soc_counter_status: unit=%d [ 10f4c] bcm_stat_sync_timeout [ 10f64] soc_counter_sync: counter thread not responding [ 10f98] soc_counter_stop: unit=%d [ 10fb4] soc_counter_stop: stopped [ 10fd0] soc_counter_stop: waiting for idle [ 10ff4] soc_counter_stop: thread did not exit [ 11020] pdma_timeout_usec [ 11034] soc_dma_abort_channel unit %d: channel %d abort timeout [ 11070] User assertion failed: "%s", at %s:%d [ 11098] (ctrl & DC_ABORT_DMA(channel)) == 0 [ 110bc] dma.c [ 110c4] sc->sc_q_cnt == 0 [ 110d8] sc->sc_q == NULL [ 110ec] sc->sc_q->dv_channel >= 0 [ 11108] %sBCM5632 Frame: len=%d (header=%d payload=%d) [ 11138] %s0x%02x%02x%02x%02x [ 1115c] %s0x%02x%02x%02x%02x START=<0x%x> [ 11198] %sHIGIG2 Frame: len=%d (header=%d payload=%d) [ 111c8] %s802.3 Ether-II VLAN-Tagged Payload (%d bytes) [ 111fc] %sHIGIG Frame: len=%d (header=%d payload=%d) [ 1122c] %sdata[%04x]: [ 1123c] [ 11240] %02x%s [ 11248] %s [ 11250] %sdata[%04x]: { [ 11260] %02x [ 11268] } { [ 1126c] } [ 11270] %02x%02x [ 1127c] [ 11288] %sdata[%04x]: [ 112a0] 0 [ 112a4] 1 [ 112a8] 2 [ 112ac] 3 [ 112b0] TX [ 112b4] RX [ 112b8] *ERR* [ 112c0] %sdv@%p unit %d dcbtype-%d op=%s vcnt=%d dcnt=%d cnt=%d [ 112fc] illegal [ 11304] %s chan=%s chain=%p flags=0x%x-->%s [ 1132c] %s user1 %p. user2 %p. user3 %p. user4 %p [ 1135c] %sdcb[%d] @%p: [ 1136c] %s tx-param flags 0x%x cos %d sp.sm %d.%d [ 1139c] any [ 113a0] combine-dcb [ 113b0] notify-pkt [ 113bc] notify-chn [ 113c8] notify-dsc [ 113d4] None [ 113dc] %sdv@%p appears invalid [ 113f8] dv_chain->dv_op == DV_RX [ 11414] !(dv_chain->dv_flags & DV_F_NOTIFY_DSC) || dv_chain->dv_done_desc [ 11458] !(dv_chain->dv_flags & DV_F_NOTIFY_CHN) || dv_chain->dv_done_chain [ 1149c] sc->sc_type == dv_chain->dv_op [ 114bc] soc_dma_dv_alloc [ 114d0] sdma_dmabuf_alloc [ 114e4] sdma_dcb_alloc [ 114f4] cnt > 0 [ 114fc] dv->dv_dcb [ 11508] dv [ 1150c] dv->dv_magic == DV_MAGIC_NUMBER [ 1152c] dv_active [ 11538] dv_chain [ 11544] sc->sc_q_cnt [ 11554] _soc_dma_done_chain: NULL callback: unit=%d chain=%p [ 1158c] sc->sc_q != NULL [ 115a0] sc->sc_q_cnt > 0 [ 115b4] dv_chain->dv_done_desc == src_chain->dv_done_desc [ 115e8] dv_chain->dv_done_chain == src_chain->dv_done_chain [ 1161c] src_chain [ 11628] !(flags & ~(SOC_DMA_F_MBM | SOC_DMA_F_POLL | SOC_DMA_F_INTR_ON_DESC | SOC_DMA_F_TX_DROP | SOC_DMA_F_DEFAULT)) [ 11698] c >= 0 && c < soc->soc_max_channels [ 116bc] tx_purge [ 116c8] c < soc->soc_max_channels [ 116e4] dv_sem [ 116ec] soc_dma_rom_dcb_alloc [ 11704] soc_dma_rom_dcb_alloc_packet [ 11724] sdma_dv_alloc [ 11734] [ 11740] %s.%d [ 11748] %s_%s [ 11750] %s.port%d [ 1175c] %s_port%d [ 11768] %s_%d [ 11770] %s.cos%d [ 1177c] %s_%s%1d [ 11788] %s.port%d.%s [ 11798] fe [ 1179c] ge [ 117a0] hg [ 117a4] xe [ 117a8] cpu [ 117ac] spi [ 117b0] exp [ 117b8] epic [ 117c0] gpic [ 117c8] hpic [ 117d0] ipic [ 117d8] xpic [ 117e0] cmic [ 117e8] cpic [ 117f0] arl [ 117f4] mmu [ 117f8] mcu [ 117fc] gport [ 11804] xport [ 1180c] gxport [ 11814] xgport [ 1181c] qgport [ 11824] xqport [ 1182c] sport [ 11834] ipipe [ 1183c] ipipe_hi [ 11848] epipe [ 11850] epipe_hi [ 1185c] igr [ 11860] egr [ 11864] bse [ 11868] cse [ 1186c] hse [ 11870] bsafe [ 11878] esm [ 1187c] e [ 11880] g [ 11884] h [ 11888] i [ 1188c] x [ 11890] otpc [ 11898] bp [ 1189c] ci [ 118a0] cs [ 118a4] eb [ 118a8] ep [ 118ac] es [ 118b0] fd [ 118b4] ff [ 118b8] fr [ 118bc] tx [ 118c0] qma [ 118c4] qmb [ 118c8] qmc [ 118cc] qsa [ 118d0] qsb [ 118d4] rb [ 118d8] sc_top [ 118e0] sf_top [ 118e8] ts [ 118ec] ? [ 118f0] User assertion failed: "%s", at %s:%d [ 11918] i >= 0 [ 11920] drvmem.c [ 1192c] fieldinfo [ 11938] _soc_field_value_fit(fieldinfo, fldbuf) [ 11960] SOC_MEM_IS_VALID(unit, mem) [ 1197c] len <= 32 [ 11988] index >= 0 [ 11994] blk >= 0 && blk < SOC_MAX_NUM_BLKS [ 119b8] start [ 119c0] hgi [ 119c4] vlan_tag [ 119d0] vlan_pri [ 119dc] vlan_cfi [ 119e8] vlan_id [ 119f0] src_mod [ 119f8] opcode [ 11a00] pfm [ 11a04] src_port [ 11a10] dst_port [ 11a1c] cos [ 11a20] hdr_format [ 11a2c] cng [ 11a30] dst_mod [ 11a38] dst_t [ 11a40] dst_tgid [ 11a4c] ingress_tagged [ 11a5c] mirror_only [ 11a68] mirror_done [ 11a74] mirror [ 11a7c] tgid [ 11a84] l2mc_ptr [ 11a90] ctag [ 11a98] hdr_ext_len [ 11aa4] l3 [ 11aa8] donot_modify [ 11ab8] donot_learn [ 11ac4] lag_failover [ 11ad4] label_present [ 11ae4] vc_label [ 11af0] tc [ 11af4] mcst [ 11afc] mgid [ 11b04] lbid [ 11b0c] dp [ 11b10] ppd_type [ 11b1c] src_t [ 11b24] multipoint [ 11b30] fwd_type [ 11b3c] dst_vp [ 11b44] src_vp [ 11b4c] vni [ 11b50] data_container_type [ 11b64] data_container [ 11b74] preserve_dscp [ 11b84] preserve_dot1p [ 11b94] dst_type [ 11ba0] src_type [ 11bac] deferred_drop [ 11bbc] vxlt_done [ 11bc8] deferred_change_pkt_pri [ 11be0] new_pkt_pri [ 11bec] deferred_change_dscp [ 11c04] new_dscp [ 11c10] User assertion failed: "%s", at %s:%d [ 11c38] COUNTOF(soc_higig_field_names) == HG_COUNT [ 11c64] higig.c [ 11c6c] hg_set: unit %d: Unknown higig2 field=%d val=0x%x [ 11ca2] pdphptpԀpqq$q,qDr8q`ssspqhsqpqqq̀qr8sXr@rPrhrrrr̀rss<sXshspsrssĀsԀs܀st4tHthtuu(u\uxuuuuhg_get: unit %d: Unknown higig2 field=%d [ 11daa] v@vPvXvvvvvĀvԀwTvẁxwvx vw [ 11df2] w ww$wTww\wpw|wwwwwẁw؀wwwxwx xx(x4x<x`xhxx̀yy$yLyTy`yhyty%s0x%02x%02x%02x%02x [ 11ef4] %s0x%02x%02x%02x%02x [ 11f40] %s0x%02x%02x%02x%02x [ 11fb4] %s0x%02x%02x%02x%02x [ 12054] %s0x%02x%02x%02x%02x [ 12084] %s0x%02x%02x%02x%02x [ 12130] %s0x%02x%02x%02x%02x [ 121e4] %s0x%02x%02x%02x%02x [ 12230] %s0x%02x%02x%02x%02x [ 122f4] %s0x%02x%02x%02x%02x [ 12318] %s PFM=%d SRC_T=%d OPCODE=%d HXL=%d> [ 1234c] hg_set: unit %d: Unknown higig field=%d val=0x%x [ 12382] z$z,z8z|zzzԀ{<{`}{|{{{̀||h|||Ā||}}4}d}t}}}Ȁ}}~hg_get: unit %d: Unknown higig field=%d [ 1242a] ~؀~~~ LTdtԀ$<T`lx%s0x%02x%02x%02x%02x [ 124f4] %s0x%02x%02x%02x%02x [ 125a4] %s LP=%d VC_LABEL=0x%05x [ 125cc] %s OVERLAY: CTAG=0x%x> [ 125f0] PCI_PARITY_ERR [ 12600] PCI_FATAL_ERR [ 12610] SCHAN_ERR [ 1261c] GBP_FULL [ 12628] SCH_MSG_DONE [ 12638] MIIM_OP_DONE [ 12648] LINK_STAT_MOD [ 12658] ARL_MBUF [ 12664] ARL_MBUF_DROP [ 12674] ARL_DMA_CNT0 [ 12684] ARL_DMA_XFER [ 12694] TDMA_DONE [ 126a0] TSLAM_DONE [ 126ac] CH0_CHAIN_DONE [ 126bc] CH1_CHAIN_DONE [ 126cc] CH2_CHAIN_DONE [ 126dc] CH3_CHAIN_DONE [ 126ec] CH0_DESC_DONE [ 126fc] CH1_DESC_DONE [ 1270c] CH2_DESC_DONE [ 1271c] CH3_DESC_DONE [ 1272c] MMU_IRQ_STAT [ 1273c] IRQ_FIFO_CH1_DMA [ 12750] IRQ_FIFO_CH2_DMA [ 12764] STAT_ITER_DONE [ 12774] I2C_INTR [ 12780] LPM_LO_PARITY [ 12790] LPM_HI_PARITY/BSE [ 127a4] L3_PARITY/CSE [ 127b4] L2_PARITY/HSE [ 127c4] VLAN_PARITY/MEMFAIL [ 127d8] BSAFE_OP_DONE/BROADSYNC_INTR [ 127ff] <<UNIT %d SCHAN ERROR: Memory parity error [ 12854] UNIT %d SCHAN ERROR: PLL/DLL lock loss error [ 12884] UNIT %d SCHAN ERROR: V/E=%d SRC=%d DST=%d [ 128b0] OPCODE=%d(%s) ERRCODE=0x%x [ 128cc] UNIT %d SCHAN ERROR: Unknown reason [ 128f4] UNIT %d SCHAN ERROR: CFAP oversubscribed [ 12920] UNIT %d SCHAN ERROR: SDRAM checksum error, slot=0x%x (GBP index 0x%x) [ 12968] UNIT %d SCHAN ERROR: Unexpected first cell [ 12994] UNIT %d SCHAN ERROR: MMU soft reset [ 129bc] UNIT %d SCHAN ERROR: CBP Cell CRC error [ 129e8] UNIT %d SCHAN ERROR: CBP Header parity error [ 12a18] UNIT %d SCHAN ERROR: MMU sent cells not in packet [ 12a4c] UNIT %d SCHAN ERROR: Cell data CRC error [ 12a78] UNIT %d SCHAN ERROR: Frame data CRC error [ 12aa4] UNIT %d SCHAN ERROR: Cell pointer block CRC error [ 12ad8] UNIT %d SCHAN ERROR: Multiple errors: 0x%x [ 12b04] UNIT %d SCHAN ERROR: Unknown memory error [ 12b30] User assertion failed: "%s", at %s:%d [ 12b58] 0 [ 12b5c] intr.c [ 12b67] $LЀ [ 12b83] 0 [ 12b93] (@XDMA CH0 [ 12ba8] DMA CH1 [ 12bb0] DMA CH2 [ 12bb8] DMA CH3 [ 12bc0] Status write for TX and RX DMA CH0 [ 12be4] Table DMA [ 12bf0] Memory write for RX DMA CH0 [ 12c0c] Stats DMA [ 12c18] Status write for TX and RX DMA CH1 [ 12c3c] Unknown [ 12c44] Memory write for RX DMA CH1 [ 12c60] Status write for TX and RX DMA CH2 [ 12c84] Memory write for RX DMA CH2 [ 12ca0] Status write for TX and RX DMA CH3 [ 12cc4] Memory write for RX DMA CH3 [ 12ce0] Descriptor read for TX and RX DMA CH0 [ 12d08] SLAM DMA [ 12d14] Memory read for TX DMA CH0 [ 12d30] Descriptor read for TX and RX DMA CH1 [ 12d58] Memory read for TX DMA CH1 [ 12d74] Descriptor read for TX and RX DMA CH2 [ 12d9c] Memory read for TX DMA CH2 [ 12db8] Descriptor read for TX and RX DMA CH3 [ 12de0] Memory read for TX DMA CH3 [ 12dfc] FIFO DMA CH0 [ 12e0c] FIFO DMA CH1 [ 12e1c] FIFO DMA CH2 [ 12e2c] FIFO DMA CH3 [ 12e3c] UNIT %d ERROR interrupt: %d PCI %s Errors on %s [ 12e70] UNIT %d ERROR interrupt: CMIC_DMA_STAT = 0x%08x PCI %s Error on %s [ 12eb4] Fatal [ 12ebc] Parity [ 12ec4] soc_intr unit %d: dispatch %s [ 12ee4] soc_intr unit %d: ERROR can't clear interrupt(s): IRQ=0x%x (disabling 0x%x) [ 12f34] User assertion failed: "%s", at %s:%d [ 12f5c] 0 [ 12f60] link.c [ 12f68] SOC_PBMP_IS_NULL(pbm) [ 12f83] ( [ 12f87] / [ 12f8b] [ 12f8f] ! [ 12f93] " [ 12f97] # [ 12f9b] $ [ 12f9f] % [ 12fa3] & [ 12fa7] ' [ 12fab] ) [ 12faf] * [ 12fb3] + [ 12fb7] , [ 12fbb] - [ 12fbf] . [ 12fc2] [ 12fc6] [ 12fca] ! [ 12fce] ! (port_bit >=0) && ((port_bit / 4) < map_r_size) [ 13000] lccdrain_timeout_usec [ 13018] ERROR: port %d:%s: timeout draining packets (%d cells remain) [ 13058] soc_mac_mode_set: reconfiguring port=%d mode=%d [ 1309b] xxǼxǼǼǼǼǼǼǼǼǼǼǼxxxǼǼǼǼDDDDDD  10Mb/100Mb MAC Driver [ 131fc] 1000Mb MAC Driver [ 13212] 6x7$6x7$7$7$7$6x6x6x7$7$6x6x6x6x7$7$6x6xgport_rsv_mask [ 13270] soc_mem_cmp: cannot compare entries of this type [ 132a4] User assertion failed: "%s", at %s:%d [ 132cc] 0 [ 132d0] mem.c [ 132d8] SOC_MEM_BLOCK_VALID(unit, mem, copyno) [ 13300] soc_mem_is_sorted(unit,mem) [ 1331c] soc_attached(unit) [ 13330] SOC_MEM_IS_VALID(unit, mem) [ 1334c] < [ 13350] Memory not valid for unit [ 1336c] > [ 13370] %s [ 13390] > [ 13394] %s< [ 13398] SOC_UNIT_VALID(unit) [ 133b0] dis [ 133b4] en [ 133b8] soc_mem_cache_set: unit %d memory %s.%s %sable [ 133ec] table-cache [ 133f8] table-vmap [ 13404] soc_mem_cache_set: cache=%p size=%d vmap=%p [ 13434] dma [ 13438] * [ 1343c] soc_mem_cache_invalidate: invalid index %d for memory %s [ 13478] cfap_tests [ 13484] bad_list [ 13490] soc_mem_cfap_init: unit %d: testing CBPHEADER [ 134c0] Unable to disable parity warnings on %s [ 134ec] soc_mem_cfap_init: unit %d: Chip unusable, %d error(s) in low entries [ 13534] soc_mem_cfap_init: unit %d: mapping out CBP index %d [ 1356c] soc_mem_cfap_init: unit %d: detected and removed %d bad entries [ 135b0] soc_mem_cfap_init: unit %d: Chip unusable, too many bad entries (%d) [ 135f8] soc_mem_cfap_init: unit %d: testing CBPDATA%d [ 13628] soc_mem_cfap_init: unit %d: testing CBPPKTHEADER%d [ 1365c] _soc_xgs3_mem_dma: unit %d mem %s.%s index %d-%d buffer %p [ 13698] _soc_xgs3_mem_dma: table dma of %d entries of %d beats from 0x%x [ 136dc] %s: %s.%s failed(NAK) [ 136f4] _soc_xgs3_mem_dma [ 13708] polling [ 13710] interrupt [ 1371c] %s: %s.%s %s timeout [ 13734] _soc_xgs3_mem_dma: Abort Failed [ 13758] index_min <= index_max [ 13770] soc_mem_index_valid(unit, mem, index_max) [ 1379c] soc_mem_index_valid(unit, mem, index_min) [ 137c8] _soc_xgs3_mem_slam: unit %d mem %s.%s index %d-%d buffer %p [ 13808] _soc_xgs3_mem_slam: tslam dma of %d entries of %d beats from 0x%x to index %d-%d [ 1385c] _soc_xgs3_mem_slam [ 13870] _soc_xgs3_mem_slam: Abort Failed [ 13894] soc_mem_index_valid(unit, mem, index_end) [ 138c0] soc_mem_index_valid(unit, mem, index_begin) [ 138ec] mem_clear_buf [ 138fc] soc_mem_write_range: write %s.%s[%d-%d] failed: %s [ 13930] soc_mem_read: invalid block %d for memory %s [ 13960] soc_mem_read: invalid index %d for memory %s [ 13990] soc_mem_read: invalid S-Channel reply, expected READ_MEMORY_ACK: [ 139d4] soc_mem_read unit %d: %s.%s[%d]: [ 139fc] soc_mem_read_range: unit %d memory %s.%s [%d:%d] [ 13a30] buffer != NULL [ 13a40] soc_mem_write: attempt to write R/O memory %s [ 13a70] soc_mem_write: invalid block %d for memory %s [ 13aa0] soc_mem_write unit %d: %s.%s[%d]: [ 13ac4] soc_mem_write_range: unit %d memory %s.%s [%d:%d] [ 13af8] soc_mem_clear: unit %d memory %s.%s returns %s [ 13b28] soc_mem_clear: write %s.%s[%d] failed: %s [ 13b54] soc_mem_search: read %s.%s[%d] failed [ 13b7c] soc_mem_generic_lookup: invalid block %d for memory %s [ 13bb4] soc_mem_generic_lookup: invalid S-Channel reply, expected TABLE_LOOKUP_DONE_MSG: [ 13c08] Lookup table[%s]: banks=%d [ 13c24] (index=%d) [ 13c34] Not found [ 13c40] Fail [ 13c48] soc_mem_generic_insert: invalid block %d for memory %s [ 13c80] soc_mem_generic_insert: invalid S-Channel reply, expected TABLE_INSERT_DONE_MSG: [ 13cd4] Insert table[%s]: hash bucket full [ 13cf8] Insert table[%s]: Modfifo full [ 13d18] Insert table[%s]: Parity Error Index %d [ 13d44] Insert table[%s]: banks=%d [ 13d60] soc_mem_generic_delete: invalid block %d for memory %s [ 13d98] soc_mem_generic_delete: invalid S-Channel reply, expected TABLE_DELETE_DONE_MSG: [ 13dec] Delete table[%s]: Not found [ 13e0c] Delete table[%s]: Modfifo full [ 13e2c] Delete table[%s]: Parity Error Index %d [ 13e58] Delete table[%s]: banks=%d [ 13e74] index_ptr [ 13e80] entry_data [ 13e8c] soc_mem_is_sorted(unit, mem) || soc_mem_is_hashed(unit, mem) || soc_mem_is_cam(unit, mem) || soc_mem_is_cmd(unit, mem) [ 13f04] Dual hash [ 13f10] soc_mem_insert: write %s.%s[%d] failed [ 13f38] soc_mem_insert: read %s.%s[%d] failed [ 13f60] soc_mem_delete_index: write %s.%s[%d] failed [ 13f90] soc_mem_delete_index: read %s.%s[%d] failed [ 13fc0] key_data [ 13fcc] soc_mem_entries: invalid block %d for memory %s [ 14000] soc_mem_is_sorted(unit, mem) || soc_mem_is_hashed(unit, mem) || soc_mem_is_cam(unit, mem) || soc_mem_is_cmd(unit, mem) || mem == VLAN_TABm [ 1408c] soc_miim_write: id=0x%02x addr=0x%02x data=0x%04x [ 140c0] Interrupt received [ 140d8] soc_miim_write: timeout (id=0x%02x addr=0x%02x data=0x%04x) [ 14118] Done in %d polls [ 1412c] User assertion failed: "%s", at %s:%d [ 14154] !sal_int_context() [ 14168] miim.c [ 14170] soc_miim_read: id=0x%02x addr=0x%02x [ 14198] soc_miim_read: read data=0x%04x [ 141bc] soc_miim_read: timeout (id=0x%02x addr=0x%02x) [ 141ec] phy_rd_data [ 141f8] soc_miimc45_write: id=0x%02x phy_devad=0x%02x addr=0x%02x data=0x%04x [ 14240] soc_miimc45_write: timeout (id=0x%02x addr=0x%02x data=0x%04x) [ 14280] soc_miimc45_read: id=0x%02x phy_devad=0x%02x addr=0x%02x [ 142bc] soc_miimc45_read: read data=0x%04x [ 142e0] soc_miimc45_read: timeout (id=0x%02x addr=0x%02x) [ 14314] CMIC_SCHAN_CTRL [ 14324] CMIC_ARL_DMA_ADDR [ 14338] CMIC_ARL_DMA_CNT [ 1434c] CMIC_SCHAN_ERR [ 1435c] CMIC_COS_ENABLE_COS0 [ 14374] CMIC_COS_ENABLE_COS1 [ 1438c] CMIC_COS_ENABLE_COS2 [ 143a4] CMIC_COS_ENABLE_COS3 [ 143bc] CMIC_COS_ENABLE_COS4 [ 143d4] CMIC_COS_ENABLE_COS5 [ 143ec] CMIC_COS_ENABLE_COS6 [ 14404] CMIC_COS_ENABLE_COS7 [ 1441c] CMIC_ARL_MBUF00 [ 1442c] CMIC_ARL_MBUF01 [ 1443c] CMIC_ARL_MBUF02 [ 1444c] CMIC_ARL_MBUF03 [ 1445c] CMIC_ARL_MBUF10 [ 1446c] CMIC_ARL_MBUF11 [ 1447c] CMIC_ARL_MBUF12 [ 1448c] CMIC_ARL_MBUF13 [ 1449c] CMIC_ARL_MBUF20 [ 144ac] CMIC_ARL_MBUF21 [ 144bc] CMIC_ARL_MBUF22 [ 144cc] CMIC_ARL_MBUF23 [ 144dc] CMIC_ARL_MBUF30 [ 144ec] CMIC_ARL_MBUF31 [ 144fc] CMIC_ARL_MBUF32 [ 1450c] CMIC_ARL_MBUF33 [ 1451c] CMIC_DMA_CTRL [ 1452c] CMIC_DMA_STAT [ 1453c] CMIC_HOL_STAT [ 1454c] CMIC_CONFIG [ 14558] CMIC_DMA_DESC0 [ 14568] CMIC_DMA_DESC1 [ 14578] CMIC_DMA_DESC2 [ 14588] CMIC_DMA_DESC3 [ 14598] CMIC_I2C_SLAVE_ADDR [ 145ac] CMIC_I2C_DATA [ 145bc] CMIC_I2C_CTRL [ 145cc] CMIC_I2C_STAT [ 145dc] CMIC_I2C_SLAVE_XADDR [ 145f4] CMIC_I2C_GP0 [ 14604] CMIC_I2C_GP1 [ 14614] CMIC_I2C_RESET [ 14624] CMIC_LINK_STAT [ 14634] CMIC_IRQ_STAT [ 14644] CMIC_IRQ_MASK [ 14654] CMIC_MEM_FAIL [ 14664] CMIC_IGBP_WARN [ 14674] CMIC_IGBP_DISCARD [ 14688] CMIC_MIIM_PARAM [ 14698] CMIC_MIIM_READ_DATA [ 146ac] CMIC_SCAN_PORTS [ 146bc] CMIC_STAT_DMA_ADDR [ 146d0] CMIC_STAT_DMA_SETUP [ 146e4] CMIC_STAT_DMA_PORTS [ 146f8] CMIC_STAT_DMA_CURRENT [ 14710] CMIC_ENDIAN_SELECT [ 14724] CMIC_UNUSED_0x%04x [ 14738] CMIC_LED_DATA%02x [ 1474c] CMIC_LED_PROG%02x [ 14760] CMIC_LED_STATUS [ 14770] CMIC_LED_CTRL [ 14780] CMIC_SCHAN_D%02d [ 14794] User assertion failed: "%s", at %s:%d [ 147bc] (offset & 3) == 0 [ 147d0] pci.c [ 147d8] FATAL PCI error testing PCIM[0x%x]: Wrote 0x%x, read 0x%x, re-read 0x%x [ 14824] phy_port_info [ 14834] int_phy_ctrl [ 14844] phy_rmap [ 14850] soc_phyctrl_probe external: u=%d p=%d %s [ 1487c] soc_phyctrl_probe internal: u=%d p=%d %s [ 148a8] phy_sgmii_autoneg [ 148bc] serdes_fiber_pref [ 148d0] soc_phyctrl_loopback_set: u=%d p=%d TIMEOUT [ 14900] soc_phyctrl_ability_get: Speed support above 16Gbps willnot work. Use soc_phyctrl_ability_local_get [ 14968] soc_phyctrl_ability_get E=%08x I=%08x C=%08x [ 14998] NOCXN [ 149a0] NULL [ 149a8] MII [ 149ac] GMII [ 149b4] SGMII [ 149bc] TBI [ 149c0] XGMII [ 149c8] RGMII [ 149d0] RvMII [ 149d8] 1000X [ 149e0] %s [ 149e4] port %d [ 149f8] phy_id0 0x%04x [ 14a10] phy_id1 0x%04x [ 14a28] phy_model 0x%04x [ 14a40] phy_rev 0x%04x [ 14a58] phy_oui 0x%04x [ 14a70] phy_id 0x%02x [ 14a88] ledmode 0x%02x, 0x%02x, 0x%02x, 0x%02x [ 14ab8] ledctrl 0x%04x [ 14ad0] ledselect 0x%04x [ 14ae8] N [ 14aec] Y [ 14af0] automedium %s [ 14b04] tbi_capable %s [ 14b18] medium %x [ 14b2c] fiber_detect %d [ 14b40] halfout %d [ 14b54] interface %s [ 14b68] phy_addr 0x%02x [ 14b80] phy_addr_int 0x%02x [ 14b98] phy_name %s [ 14bac] phy_flags %s%s%s%s%s%s [ 14bcc] COPPER [ 14bd4] FIBER [ 14bdc] PASSTHRU [ 14be8] TBI [ 14bf0] 100FX [ 14bf8] SGMII_AN [ 14c04] WAN [ 14c0c] EXTERNAL [ 14c18] MEDIUM_CHANGED [ 14c28] SERDES_FIBER [ 14c38] FORCED_SGMII [ 14c48] FORCED_COPPER [ 14c58] C45 [ 14c60] DISABLED [ 14c6c] phy_flags %s%s [ 14c80] an_timeout %d [ 14c94] ---------------------- [ 14cac] PHY SW not initialized [ 14cc4] -------------------- [ 14cdc] Internal PHY Control [ 14cf4] External PHY Control [ 14d0c] User assertion failed: "%s", at %s:%d [ 14d34] SOC_REG_IS_VALID(unit, reg) [ 14d50] reg.c [ 14d58] soc_reg32_read: invalid S-Channel reply, expected READ_REG_ACK: [ 14d9c] soc_reg64_read: invalid S-Channel reply, expected READ_REG_ACK: [ 14de0] soc_reg_write: WARNING: write to 32-bit reg %s with hi order data, 0x%x [ 14e30] REG_FIELD_IS_VALID [ 14e44] finfop [ 14e4c] !VALUE_TOO_BIG_FOR_FIELD [ 14e68] !VALUE_TOO_BIG_FOR_FIELD64 [ 14e84] index >= 0 && index < SOC_REG_NUMELS(unit, reg) [ 14eb4] 0 [ 14eb8] index >= 0 && index < NUM_COS(unit) [ 14edc] block >= 0 [ 14ee8] SOC_PORT_VALID(unit, port) [ 14f04] SOC_REG_ADDR_INVALID_PORT [ 14f20] regaddrlist [ 14f2c] UNKNOWN_OPCODE [ 14f3c] BP_WARN_STATUS [ 14f4c] BP_DISCARD_STATUS [ 14f60] COS_QSTAT_NOTIFY [ 14f74] HOL_STAT_NOTIFY [ 14f88] READ_MEM_CMD [ 14f98] READ_MEM_ACK [ 14fa8] WRITE_MEM_CMD [ 14fb8] WRITE_MEM_ACK [ 14fc8] READ_REG_CMD [ 14fd8] READ_REG_ACK [ 14fe8] WRITE_REG_CMD [ 14ff8] WRITE_REG_ACK [ 15008] ARL_INSERT_CMD [ 15018] ARL_INSERT_DONE [ 15028] ARL_DELETE_CMD [ 15038] ARL_DELETE_DONE [ 15048] LINKSTAT_NOTIFY [ 15058] MEM_FAIL_NOTIFY [ 15068] INIT_CFAP [ 15074] ENTER_DEBUG_MODE [ 15088] EXIT_DEBUG_MODE [ 15098] ARL_LOOKUP_CMD [ 150a8] L3_INSERT_CMD [ 150b8] L3_INSERT_DONE [ 150c8] L3_DELETE_CMD [ 150d8] L3_DELETE_DONE [ 150e8] L3_LOOKUP_CMD [ 150f8] L2_LOOKUP_CMD_MSG [ 1510c] L2_LOOKUP_ACK_MSG [ 15120] L3X2_LOOKUP_CMD_MSG [ 15134] L3X2_LOOKUP_ACK_MSG [ 15148] TABLE_INSERT_CMD_MSG [ 15160] TABLE_INSERT_DONE_MSG [ 15178] TABLE_DELETE_CMD_MSG [ 15190] TABLE_DELETE_DONE_MSG [ 151a8] TABLE_LOOKUP_CMD_MSG [ 151c0] TABLE_LOOKUP_DONE_MSG [ 151d8] FIFO_POP_CMD_MSG [ 151ec] FIFO_POP_DONE_MSG [ 15200] FIFO_PUSH_CMD_MSG [ 15214] FIFO_PUSH_DONE_MSG [ 15228] HDR[CPU=%d COS=%d EBIT=%d ECODE=%d L=%d SRC=%d DST=%d OP=%d=%s] [ 1526c] DW[%2d]=0x%08x [ 1527c] %s [ 15284] User assertion failed: "%s", at %s:%d [ 152ac] dwc <= CMIC_SCHAN_WORDS(unit) [ 152cc] schan.c [ 152d4] NAK received from SCHAN. [ 152f0] soc_schan_op: operation attempt timed out [ 1531c] soc_schan_op: operation timed out [ 15340] Done in %d polls [ 15354] Interrupt received [ 1536c] S-CHANNEL %s: (unit %d) [ 15388] dwc_read <= CMIC_SCHAN_WORDS(unit) [ 153ac] dwc_write <= CMIC_SCHAN_WORDS(unit) [ 153d0] ! sal_int_context() [ 153e6] #$$l$#$#$$<$$T$$$$l$$$$$t$$$$$$Ȁ$%ERROR: port %d:%s: timeout draining packets (%d cells remain) [ 15494] lccdrain_timeout_usec [ 154ac] UniMAC Driver [ 154bc] pbmp_valid [ 154c8] pbmp_gport_stack [ 154dc] pbmp_xport_xe [ 154ec] pbmp_xport_ge [ 154fc] ?%d [ 15500] %s%d [ 15508] fe [ 1550c] ge [ 15510] xe [ 15514] hg [ 15518] lb [ 1551c] mmu [ 15520] rcpu_only [ 1552c] emulation_regs [ 1553c] bcm56524_2x12_2x24 [ 15550] bcm56629_40ge [ 15560] bcm56634_48g_4x12 [ 15574] bcm56634_48g_2x24 [ 15588] bcm56638_4x12_2x24 [ 1559c] bcm56638_8x12 [ 155ac] bcm56636_2x12_2x24 [ 155c0] bcm56636_24g_6x12 [ 155d4] bcm56725_16x16 [ 155e4] bcm56821_20x12 [ 155f4] bcm56822_8x16 [ 15604] bcm56639_28g_7x10 [ 15618] module_64ports [ 15628] humv [ 15630] goldwing [ 1563c] mdio_external_master [ 15654] l2xmsg_shadow_hit_bits [ 1566c] port_rate_egress_lock [ 15684] mem_clear_hw_acceleration [ 156a0] mem_clear_chunk_size [ 156b8] bcm_use_gport [ 156c8] dual_hash_recurse_depth [ 156e0] xgxs_lcpll_xtal_refclk [ 156f8] pci_delay_reg [ 15708] pci_delay_val [ 15718] soc_skip_reset [ 1576c] soc_control [ 15778] soc_persist [ 15784] pci2eb_override [ 15794] polled_irq_mode [ 157a4] SOC_CONTROL [ 157b0] SCHAN [ 157b8] MIIM [ 157c4] memscan timer [ 157d4] ipfix_intr_enable [ 157e8] l2mod_dma_intr_enable [ 15800] multi_sbus_cmds_spacing [ 15818] Counter [ 15820] memmax_ [ 15828] SCHAN interrupt [ 15838] MIIM interrupt [ 15848] schan_timeout_usec [ 1585c] miim_timeout_usec [ 15870] bist_timeout_msec [ 15884] schan_intr_enable [ 15898] schan_error_block_usec [ 158b0] miim_intr_enable [ 158c4] ARL interrupt [ 158d4] arl_resync_delay [ 158e8] l2xmsg timer [ 158f8] l2xmsg delete sync [ 1590c] l2xmsg lock [ 15918] arl_rate_limit [ 15928] IPFIX interrupt [ 15938] memcmd_timeout_usec [ 1594c] memcmd_intr_enable [ 15960] MemCmd interrupt [ 15974] tslam_dma_enable [ 15988] tslam_timeout_usec [ 1599c] TSlamDMA [ 159a8] TSLAM interrupt [ 159b8] tslam_intr_enable [ 159cc] table_dma_enable [ 159e0] tdma_timeout_usec [ 159f4] TblDMA [ 159fc] TDMA interrupt [ 15a0c] tdma_intr_enable [ 15a20] skip_L2_USER_ENTRY [ 15a34] unit %d : ING_HW_RESET timeout [ 15a54] unit %d : EGR_HW_RESET timeout [ 15a77] ( [ 15a7b] / [ 15a7f] [ 15a83] ! [ 15a87] " [ 15a8b] # [ 15a8f] $ [ 15a93] % [ 15a97] & [ 15a9b] ' [ 15a9f] ) [ 15aa3] * [ 15aa7] + [ 15aab] , [ 15aaf] - [ 15ab3] . [ 15ab6] [ 15aba] [ 15abe] ! [ 15ac2] ! User assertion failed: "%s", at %s:%d [ 15aec] (uint32)(port / 4) < (sizeof(map_r)/sizeof(map_r[0])) [ 15b24] firebolt.c [ 15b33] ' [ 15b4b] % [ 15b4f] 9 [ 15b58] serdes_lcpll [ 15b68] rate_ext_mdio_divisor [ 15b80] rate_ext_mdio_dividend [ 15b98] rate_i2c_divisor [ 15bac] rate_i2c_dividend [ 15bc0] rate_stdma_divisor [ 15bd4] rate_stdma_dividend [ 15be8] rate_int_mdio_divisor [ 15c00] rate_int_mdio_dividend [ 15c18] soc_mem_clear: LPM flush failed. [ 15c57] [ 15c5b] ! [ 15c5f] " [ 15c63] # [ 15c67] $ [ 15c6b] % [ 15c6f] & [ 15c73] ' [ 15c77] ( [ 15c7b] ) [ 15c7f] * [ 15c83] + [ 15c87] , [ 15c8b] - [ 15c8f] . [ 15c93] / [ 15c97] 0 [ 15c9b] 1 [ 15c9f] 2 [ 15ca3] 3 [ 15ca7] 4 [ 15cab] 5 [ 15caf] 6 [ 15cb3] 7 [ 15cb7] 8 [ 15cbb] 9 [ 15cbf] : [ 15cc3] ; [ 15cc7] < [ 15ccb] = [ 15ccf] > [ 15cd3] ? [ 15cd7] @ [ 15cdb] A [ 15cdf] B [ 15ce3] C [ 15ce7] D [ 15ceb] E [ 15cef] F [ 15cf3] G [ 15cf7] H [ 15cfb] I [ 15cff] J [ 15d03] K [ 15d07] L [ 15d0b] M [ 15d0f] N [ 15d13] Ommu_xq_weight [ 15d24] cos [ 15d28] mmu_xq_aging [ 15d38] soc_post_init failed on unit %d [ 15d5c] soc_post_init: took %d usec [ 15d7c] soc_fb_mmu_parity_error:unit = %d,INTSTATUS = 0x%08x Fail Count = %d [ 15dc4] unit = %d, CFAPFAILERROR [ 15de0] unit = %d, CFAPPARITYERRORPTR 0x%08x [ 15e08] unit = %d, MMU Cell not in progress [ 15e30] unit = %d, CBPCELLCRCERRPTR 0x%08x [ 15e54] unit = %d, CBPPKTHDRPARITYERRPTR 0x%08x [ 15e80] unit = %d, CBPCELLHDRPARITYERRPTR 0x%08x [ 15eac] unit = %d, XQPARITYERRORPBM 0x%08x [ 15ed0] unit=%d, IPMC Over Pre-set Replication Limit [ 15f00] unit = %d, CCPPARITYERRORPTR 0x%08x [ 15f28] unit = %d, MMU Soft Reset Error [ 15f4f] ' [ 15f67] % [ 15f6b] 9 [ 15f77] ( [ 15f8f] & [ 15f93] : [ 15f9c] _soc_fb_ipipe_parity_error:unit = %d,PARITY_STATUS register (%x) = 0x%08x, Index = %d [ 15ff4] _soc_fb_ipipe_parity_error:unit = %d,PARITY_STATUS register (%x) = 0x%08x, Slice = %d,Index = %d [ 16058] _soc_fb_ipipe_parity_error:unit = %d,L3_DEFIP_PARITY_STATUS = 0x%08x, Index = %d [ 160ac] _soc_hx_ipipe_parity_error:unit = %d,L3_ENTRY_PARITY_STATUS = 0x%08x, Bucket = %d Entry Bitmap 0x%02x [ 16114] _soc_hx_ipipe_parity_error:unit = %d,L2_ENTRY_PARITY_STATUS = 0x%08x, Bucket = %d Entry Bitmap 0x%02x [ 1617c] soc_draco_l2_hash: invalid hash_sel %d [ 161ab] tsoc_draco_l3_hash: invalid hash_sel %d [ 161e7] (x4soc_draco_l3_ecmp_hash: invalid l3_hash_sel %d [ 16244] User assertion failed: "%s", at %s:%d [ 1626c] hash_sel >= 0 && hash_sel <= 5 [ 1628c] hash.c [ 16294] soc_fb_l2_hash: invalid hash_sel %d [ 162be] !8!@!!!Ā soc_fb_l3_hash: invalid hash_sel %d [ 162fe] #,#4#h#x$"soc_fb_vlan_mac_hash: invalid hash_sel %d [ 16342] %p%x%%Ā%؀% [ 1635a] -t----L-skip_L2_USER_ENTRY [ 16388] l2xmsg_avl [ 16394] asMutex [ 1639c] arl_clean_timeout_usec [ 163b4] User assertion failed: "%s", at %s:%d [ 163dc] 0 [ 163e0] l2x.c [ 163e8] l2x_entries [ 163f4] soc_l2x_entries [ 16404] soc_fb_l2x_bank_lookup: invalid S-Channel reply, expected L2_LOOKUP_ACK_MSG: [ 16454] L2 entry lookup: [ 16468] (index=%d) [ 16478] Lookup table[L2Xm]: Parity Error Index %d Bucket Bitmap 0x%08x [ 164b8] Insert table[L2_ENTRY]: [ 164d4] soc_fb_l2x_bank_insert: invalid S-Channel reply, expected L2_INSERT_ACK_MSG: [ 16524] Insert table[L2Xm]: hash bucket full [ 1654c] Insert table[L2Xm]: Modfifo full [ 16570] Insert table[L2Xm]: Parity Error Index %d Bucket Bitmap 0x%08x [ 165b0] Delete table[L2Xm]: [ 165c8] soc_fb_l2x_bank_delete: invalid S-Channel reply, expected L2_DELETE_ACK_MSG: [ 16618] Delete table[L2Xm]: Not found [ 16638] Delete table[L2Xm]: Modfifo full [ 1665c] Delete table[L2Xm]: Parity Error Index %d Bucket Bitmap 0x%08x [ 1669c] L2X_delete [ 166a8] l2xmsg_mode [ 166b4] soc_l2x_sync_delete: unit=%d index=%d [ 166dc] set_entry_deleted: u:%d i=%d [ 166fc] soc_l2x_start: unit=%d flags=0x%x interval=%d [ 1672c] bcmL2X.%d [ 16738] l2xmsg_thread_pri [ 1674c] soc_l2x_start: Could not start L2X thread [ 16778] soc_l2x_stop: unit=%d [ 16790] soc_l2x_stop: thread will not exit [ 167b4] soc_l2x_thread: table size is 0, exiting [ 167e0] l2xmsg_chunks [ 167f0] l2x_old [ 167f8] l2x_new [ 16800] l2x_delete_map [ 16810] l2x_chunk_delete_map [ 16828] soc_l2x_thread: not enough memory, exiting [ 16854] soc_l2x_thread: exiting [ 16870] User assertion failed: "%s", at %s:%d [ 16898] soc->l2x_interval == 0 [ 168b0] l2xmsg.c [ 168bc] soc_l2x_thread: Process %d-%d [ 168dc] soc_l2x_thread: unit=%d: done in %d usec [ 16908] soc_l2x_thread: DMA failed: %s [ 16928] l2xmsg_maxerr [ 16938] soc_l2x_thread: Too many errors [ 1695c] soc_l2x_thread: unable to take mutex [ 16984] chunk_size % SOC_L2X_BUCKET_SIZE == 0 [ 169ac] chunk_size > 0 [ 169bc] soc_mem_index_min(unit, l2x_data[unit].l2mem) == 0 [ 169f0] Init port %d PHY... [ 16a08] Init port %d MAC... [ 16a20] Unit %d Port %s: Failed to initialize MAC: %s [ 16a50] Unit %d Port %s: Failed to probe MAC: %s [ 16a7c] Unit %d Port %s: Failed to initialize PHY: %s [ 16aac] Unit %d Port %s: Failed to probe PHY: %s [ 16ad8] Running post on unit %d [ 16af4] Unit %d Port %s: Packet Send [ 16b14] Post completed in %d Iterations [ 16b38] tx_pkt [ 16b40] post_init_enable [ 16b54] Profile Mem Entries [ 16b68] Profile Reg Entries [ 16b7c] VLAN_MAC hash_sel %d hash index %d [ 16ba0] soc_fb_vlanmac_entry_ins: bucket %d [ 16bc8] soc_fb_vlanmac_entry_ins: write slot %d, index %d [ 16bfc] soc_fb_vlanmac_entry_del: bucket %d [ 16c24] NOTICE: SOC_I2C_EVENT_LOGGING not compiled in. [ 16c54] be [ 16c58] sta [ 16c60] stp [ 16c68] ip [ 16c6c] aak [ 16c78] ie [ 16c7c] ? [ 16c80] IDLE [ 16c88] START [ 16c90] REP START [ 16c9c] TX [ 16ca0] RX [ 16ca4] STOP [ 16cac] PROBE [ 16cb7] LXdp|unit %d i2c: %s: [ 16ce4] OFFLINE [ 16cf0] PIO [ 16cf8] INTR [ 16d00] ATTACHED [ 16d0c] I2C Mutex [ 16d18] I2C interrupt [ 16d28] soc_i2c_attach: oldspeed=%d newspeed=%d [ 16d54] INTR [ 16d5c] PIO [ 16d60] unit %d i2c 0x%03x bus: mode %s, speed %dKbps [ 16d90] current flags [ 16da0] new flags [ 16dac] i2c_bus [ 16db4] soc_i2c_next_bus_phase: (after) ctrl=0x%x data=0x%x op=%s(%d) [ 16df4] i2c%d: slave receive mode entered: %s [ 16e1c] i2c%d: slave transmit mode entered: %s [ 16e44] soc_i2c_wait: current state=0x%x:[%s] [ 16e6c] REP_ [ 16e74] unit %d i2c 0x%x: %sSTART- BAD STATUS: %s [ 16ea4] unit %d i2c 0x%x: timeout generating start condition: check or reset I2C bus [ 16ef4] unit %d i2c 0x%x: %sSTART unhandled state 0x%x: %s [ 16f28] unit %d i2c 0x%x: BUS_ADDR unhandled state 0x%x: %s [ 16f60] unit %d i2c 0x%x: no response from device: %s [ 16f90] soc_i2c_write_one_byte: u=%d data=0x%x DEVICE TIMEOUT! [ 16fc8] soc_i2c_read_bytes: u=%d data=0x%x state=0x%x:[%s] [ 16ffc] soc_i2c_read_short: u=%d data=0x%x state=0x%x:[%s] [ 17030] Bus Error [ 1703c] START Condition Transmitted [ 17058] Repeated START Condition Transmitted [ 17080] Address and Write Bit Transmitted, ACK Received [ 170b0] Address and Write Bit Transmitted, NO ACK received [ 170e4] Data Byte Transmitted, ACK Received [ 17108] Data Byte Transmitted, NO ACK Received [ 17130] Arbitration Lost in Address or Data Byte [ 1715c] Address and Read Bit Transmitted, ACK Received [ 1718c] Address and Read Bit Transmitted, NO ACK Received [ 171c0] Data Byte Received, ACK Transmitted [ 171e4] Data Byte Received, NO ACK Transmitted [ 1720c] Slave Address and Write Bit Received, ACK Transmitted [ 17244] Arbitration Lost in Address Phase, Slave Address and Write Bit Received, ACK Transmitted [ 172a0] General Call Address Received, ACK Transmitted [ 172d0] Arbitration Lost in Address Phase, General Call Address Received, ACK Transmitted [ 17324] Data Byte Received after Slave Address Received, ACK Transmitted [ 17368] Data Byte Received after Slave Address Received, NO ACK Transmitted [ 173ac] Data Byte Received after General Call Address Received, ACK Transmitted [ 173f4] Data Byte Received after General Call Address Received, NO ACK Transmitted [ 17440] STOP or Repeated START Condition Received in Slave Mode [ 17478] Slave Address and Read Bit Received, ACK Transmitted [ 174b0] Arbitration Lost in Address Phase, Slave Address and Read Bit Received, ACK Transmitted [ 17508] Data Byte Transmitted in Slave Mode, ACK Received [ 1753c] Data Byte Transmitted in Slave Mode, NO ACK Received [ 17574] Last Byte Transmitted in Slave Mode, ACK Received [ 175a8] Second Address Byte and Write Bit Transmitted, ACK Received [ 175e4] Second Address Byte and Write Bit Transmitted, NO ACK Received [ 17624] Second Address Byte and Read Bit Transmitted, ACK Received [ 17660] Second Address Byte and Read Bit Transmitted, NO AC Received [ 176a0] ERROR: Undefined status code! [ 176c0] No relevant status Information (IFLG=0) [ 176e8] 2.50MHz [ 176f0] 1.25MHz [ 176f8] 833.33kHz [ 17704] 625.00kHz [ 17710] 500.00kHz [ 1771c] 416.67kHz [ 17728] 357.14kHz [ 17734] 312.50kHz [ 17740] 277.78kHz [ 1774c] 250.00kHz [ 17758] 227.27kHz [ 17764] 208.33kHz [ 17770] 192.31kHz [ 1777c] 178.57kHz [ 17788] 166.67kHz [ 17794] 156.25kHz [ 177a0] 138.89kHz [ 177ac] 125.00kHz [ 177b8] 113.64kHz [ 177c4] 104.17kHz [ 177d0] 96.15kHz [ 177dc] 89.28kHz [ 177e8] 83.33kHz [ 177f4] 78.12kHz [ 17800] 69.44kHz [ 1780c] 62.50kHz [ 17818] 56.82kHz [ 17824] 52.08kHz [ 17830] 48.08kHz [ 1783c] 44.64kHz [ 17848] 41.67kHz [ 17854] 39.06kHz [ 17860] 34.72kHz [ 1786c] 31.25kHz [ 17878] 28.41kHz [ 17884] 26.04kHz [ 17890] 24.04kHz [ 1789c] 22.32kHz [ 178a8] 20.83kHz [ 178b4] 19.53kHz [ 178c0] 17.36kHz [ 178cc] 15.62kHz [ 178d8] 14.20kHz [ 178e4] 13.02kHz [ 178f0] 12.02kHz [ 178fc] 11.16kHz [ 17908] 10.42kHz [ 17914] 9.77kHz [ 1791c] 8.68kHz [ 17924] 7.81kHz [ 1792c] 7.10kHz [ 17934] 6.51kHz [ 1793c] 6.01kHz [ 17944] 5.58kHz [ 1794c] 5.21kHz [ 17954] 4.88kHz [ 1795c] 4.34kHz [ 17964] 3.91kHz [ 1796c] 3.55kHz [ 17974] 3.25kHz [ 1797c] 3.00kHz [ 17984] 2.79kHz [ 1798c] 2.60kHz [ 17994] 2.44kHz [ 1799c] 2.17kHz [ 179a4] 1.95kHz [ 179ac] 1.77kHz [ 179b4] 1.63kHz [ 179bc] 1.50kHz [ 179c4] 1.40kHz [ 179cc] 1.30kHz [ 179d4] 1.22kHz [ 179dc] 50.00kHz [ 179e8] 35.71kHz [ 179f4] 27.78kHz [ 17a00] 25.00kHz [ 17a0c] 22.73kHz [ 17a18] 19.23kHz [ 17a24] 17.86kHz [ 17a30] 16.67kHz [ 17a3c] 15.63kHz [ 17a48] 14.71kHz [ 17a54] 13.89kHz [ 17a60] 13.16kHz [ 17a6c] 12.50kHz [ 17a78] 11.91kHz [ 17a84] 11.36kHz [ 17a90] 10.87kHz [ 17a9c] 10.00kHz [ 17aa8] 9.62kHz [ 17ab0] 8.93kHz [ 17ab8] 8.62kHz [ 17ac0] 8.33kHz [ 17ac8] 8.07kHz [ 17ad0] 7.58kHz [ 17ad8] 7.35kHz [ 17ae0] 7.14kHz [ 17ae8] 6.94kHz [ 17af0] 6.76kHz [ 17af8] 6.58kHz [ 17b00] 6.41kHz [ 17b08] 6.25kHz [ 17b10] 6.10kHz [ 17b18] 5.95kHz [ 17b20] 5.81kHz [ 17b28] 5.68kHz [ 17b30] 5.56kHz [ 17b38] 5.44kHz [ 17b40] 5.32kHz [ 17b48] 5.10kHz [ 17b50] 5.00kHz [ 17b58] 4.90kHz [ 17b60] 4.81kHz [ 17b68] 4.72kHz [ 17b70] 4.63kHz [ 17b78] 4.55kHz [ 17b80] 4.46kHz [ 17b88] 4.39kHz [ 17b90] 4.31kHz [ 17b98] 4.24kHz [ 17ba0] 4.17kHz [ 17ba8] 4.10kHz [ 17bb0] 4.03kHz [ 17bb8] 3.97kHz [ 17bc0] 3.47kHz [ 17bc8] 3.13kHz [ 17bd0] 2.84kHz [ 17bd8] 2.40kHz [ 17be0] 2.23kHz [ 17be8] 1.74kHz [ 17bf0] 1.56kHz [ 17bf8] 1.42kHz [ 17c00] 1.20kHz [ 17c08] 1.11kHz [ 17c10] M [ 17c14] unit %d i2c bus: attempting to set speed=%d.%02d%sHz (%d) [ 17c50] unit %d i2c bus: set frequency: just set M=%d N=%d: %s [ 17c8c] k [ 17c90] unit %d i2c bus: speed %s (CCR M=%d,N=%d) [%d] [ 17cc0] i2c%d: soc_i2c_read_byte_data: failed to read data byte. [ 17cfc] i2c%d: soc_i2c_read_byte_data: failed to generate start. [ 17d38] i2c%d: soc_i2c_write_one_byte: failed to write data byte. [ 17d74] lpt0 [ 17d7c] nvram0 [ 17d84] pcie0 [ 17d8c] nvram1 [ 17d94] temp0 [ 17d9c] temp1 [ 17da4] temp2 [ 17dac] temp3 [ 17db4] temp4 [ 17dbc] temp5 [ 17dc4] temp6 [ 17dcc] temp7 [ 17dd4] adc0 [ 17ddc] adc1 [ 17de4] adc2 [ 17dec] adc3 [ 17df4] dac0 [ 17dfc] lpt1 [ 17e04] lpt2 [ 17e0c] lpt3 [ 17e14] lpt4 [ 17e1c] lpt5 [ 17e24] lpt6 [ 17e2c] lpt7 [ 17e34] lcd0 [ 17e3c] clk0 [ 17e44] poe0 [ 17e4c] poe1 [ 17e54] poe2 [ 17e5c] poe3 [ 17e64] poe4 [ 17e6c] poe5 [ 17e74] poe6 [ 17e7c] poe7 [ 17e84] poe8 [ 17e8c] Unknown [ 17e94] lpt0: PCF8574 MUX control [ 17eb0] lpt4: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 17ee8] lpt5: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 17f20] lpt2: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 17f58] lpt6: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 17f90] lpt7: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 17fc8] lpt3: PCF8574/Linear Tech 4258 Powered Ethernet (POE) [ 18000] lpt1: PCF8574 Baseboard ID [ 1801c] adc0: MAX127 A/D Converter [ 18038] adc1: MAX127 A/D Converter [ 18054] adc2: MAX127 A/D Converter [ 18070] adc3: MAX127 A/D Converter [ 1808c] dac0: Linear Technology LTC1427 DAC [ 180b0] lcd0: Matrix Orbital LCD/MAX6653 [ 180d4] ZM7XXX [ 180dc] poe0: PowerDsine 63000 PoE Microcontroller [ 18108] pcie0: [ 18110] temp0: LM75 Temperature Sensor [ 18130] temp1: LM75 Temperature Sensor [ 18150] temp2: LM75 Temperature Sensor [ 18170] temp3: LM75 Temperature Sensor [ 18190] temp4: LM75 Temperature Sensor [ 181b0] temp5: LM75 Temperature Sensor [ 181d0] temp6: LM75 Temperature Sensor [ 181f0] temp7: LM75 Temperature Sensor [ 18210] EEPROM/nvram0/XFP/POE_DB0: [ 1822c] nvram1: [ 18238] POE_DB1 [ 18240] pll0: Cypress W229B/W311 Clock Chip [ 18264] clk0: Cypress W2239x clock Chip [ 18284] clk0: Cypress W22150 clock Chip [ 182a4] PCA9548 MUX [ 182b4] unit %d i2c 0x%x: detected device [ 182d8] unit %d i2c: probing %d I2C devices. [ 18300] i2c_nvram_skip [ 18310] i2c_hclk_skip [ 18320] i2c_poe_power [ 18330] unit %d i2c 0x%x: found %s: %s [ 18350] unit %d i2c 0x%x %s: %s [ 1836c] unit %d i2c 0x%x: init failed %s [ 18390] PIO [ 18394] unit %d i2c bus: mode=%s speed=%dkbps SOC_address=0x%02X [ 183d0] (detached) [ 183dc] %15s: %s%s saddr=0x%02x [ 183f8] received %d bytes, transmitted %d bytes [ 18434] unit %d i2c bus: received %d bytes, transmitted %d bytes [ 18470] INTR [ 18478] unit %d soc_i2c_show: error attaching to I2C bus [ 184ac] Matrix Orbital LCD (http://www.matrix-orbital.com) [ 184e0] lcd [ 184e4] Broadcom Corporation [ 184fc] %s [ 18500] %d:%s [ 18508] %s: NOTICE: temperature unavailable [ 18530] %s: last temperature %d.%dC, %d.%dF [ 18558] %s: temperature %d.%dC, %d.%dF WARNING: over alarm %d.%dC [ 18594] %s: temperature %d.%dC, %d.%dF [ 185b4] %s: temperature %d.%dC, %d.%dF WARNING: over shutdown %d.%dC [ 185f4] %s: ERROR: device not responding [ 18618] unit %d: thermal monitoring completed [ 18640] LM75 Temperature Sensor [ 18658] lm75_info [ 18664] %s: ERROR: device did not initialize: %s [ 18690] bcmTEMP [ 18698] unit %d: thermal monitoring enabled [ 186c0] unit %d i2c %s: LTC1427 calibration on function %s:(max=%f,min=%f,step=%f) [ 1870c] unit %d i2c %s: calibration/range error :requested=%f (max=%f,min=%f,step=%f) [ 1875c] unit %d i2c %s: Set V_%s:request=%f dac=0x%x (max=%f,min=%f,step=%f) [ 187a4] unit %d i2c %s: ltc1427_ioctl: invalid opcode (%d) [ 187d8] @ [ 187f3] HpLinear Technology LTC1427 DAC [ 18820] Read all %s registers... [ 1883c] register[0x%02x] = 0x%02X [ 18858] Class_Unknown [ 18868] Class_1 [ 18878] Class_2 [ 18888] Class_3 [ 18898] Class_4 [ 188a8] Undef_Class_0 [ 188b8] Class_0 [ 188c8] Overcurrent [ 188d9] L᠀LᰀLLЀLLL [ 188f5] LDetect_Unknown [ 18908] Short_Circuit [ 18918] ????? [ 18928] RLOW [ 18938] Detect_Good [ 18948] RHIGH [ 18958] Open_Circuit [ 18969] L@LPL`LpL L␀L⠀L` [ 1898c] Supply_Event [ 1899c] TSTART_Fault [ 189ac] TICUT_Fault [ 189bc] Class_Complete [ 189cc] Detect_Complete [ 189e0] Disconnect [ 189ec] PwrGood_Event [ 189fc] PwrEnable_Event [ 18a10] LTC4258 status: %s%s%s%s%s%s%s%s [ 18a34] Power_Good [ 18a44] Power_Enable [ 18a54] Port #%d: %s %s %s%s [ 18a73] tͨͼЀ(LTC4259 Power over Ethernet [ 18aa8] LTC4259 [ 18ab0] LTC4258 Power over Ethernet [ 18acc] LTC4258 [ 18ad8] (0-5) [ 18ae0] (0-10) [ 18ae8] (+/-5) [ 18af0] (+/-10) [ 18af8] (unknown) [ 18b08] ?S x?0 [ 18b18] @#d [ 18b29] t [ 18b30] unit %d i2c %s: could not read channel %d [ 18b5c] unit %d i2c %s: could not configure channel %d [ 18b90] @$ [ 18b99] $ [ 18ba0] %s ch%d: %.3fV %s %d samples range %.3f..%.3f (delta %.3f) [ 18bdc] MAX127 A/D Converter [ 18bf8] PCF8574 HCLK control [ 18c10] PCF8574 synthesizer frequency selector M [ 18c3c] PCF8574 synthesizer frequency selector N [ 18c68] PCF8574 Parallel Port [ 18c80] PCF8574 PPD clock divider [ 18c9c] %s: clock selector 0x%x [ 18cb8] PCF8574 PPD clock delay [ 18cd0] %s: synth freq select A 0x%x [ 18cf0] %s: synth freq select B 0x%x [ 18d10] PCF8574 POE control [ 18d24] %s: poe control 0x%x [ 18d3c] %s: hclk control 0x%x [ 18d54] PCF8574 Baseboard ID [ 18d6c] %s: baseboard id 0x%x [ 18d84] PCF8574 MUX control [ 18d98] %s: mux control 0x%x [ 18db0] pcie_read: addr=0x%x (a0=0x%x) len=%d [ 18dd8] pcie_read(%d,%d,%x,%p,%d): to send a0 byte. [ 18e08] pcie_read(%d,%d,%x,%p,%d): failed to generate rep start. [ 18e44] pcie_read(%d,%d,%04x,%x,%p,%d): failed to send a0 byte. [ 18e80] pcie_read(%d,%d,%x,%p,%d): failed to send a0 byte. [ 18eb4] pcie_read(%d,%d,%x,%p,%d): failed to generate start. [ 18eec] pcie_write: addr=0x%x data=%p len=%d npages=%d [ 18f1c] pcie_write: unit=%d cpage=%d START on page_addr=0x%x nbytes=%d [ 18f5c] pcie_ack_poll: %d address cycles for wr latency. [ 18f90] pcie_write(u=%d,id=%d,page=%d caddr=%d,data=0x%x,idx=%d) [ 18fcc] pcie_write(%d,%d,%d,%d,%d): tx data byte error [ 18ffc] pcie_write(%d,%d,%04x,%x,%p,%d): failed to send a0 byte. [ 19038] pcie_write(%d,%d,%x,%p,%d): failed to send a0 byte. [ 19070] pcie_write(%d,%d,%x,%d,%d): failed to gen start [ 190a4] PCIE [ 190ac] i2c%d: soc_i2c_pd63000_read: failed to read data byte %d. [ 190e8] i2c%d: soc_i2c_pd63000_write: failed to send byte %d. [ 19120] i2c%d: soc_i2c_pd63000_write: failed to generate start. [ 1915c] User assertion failed: "%s", at %s:%d [ 19184] (PD63000_CTN == len) [ 1919c] pd63000.c [ 191a8] PD63000 PoE MCU [ 191b8] i2c%d: soc_i2c_pd63000_init: failed to read power init packet. [ 191f8] i2c%d: soc_i2c_pd63000_init: failed to send power init packet. [ 19238] i2c%d: soc_i2c_pd63000_init: failed to read init packet. [ 19274] i2c%d: soc_i2c_write_byte: failed to generate start. [ 192ac] i2c%d: soc_i2c_write_byte: failed to write data byte. [ 192e4] i2c%d: soc_i2c_read_byte: failed to generate start. [ 1931c] i2c%d: soc_i2c_read_byte: failed to read data byte. [ 19354] i2c%d: soc_i2c_write_word_data: failed to generate start. [ 19390] i2c%d: soc_i2c_write_word_data: failed to send data LSB. [ 193cc] i2c%d: soc_i2c_write_word_data: failed to send data MSB. [ 19408] i2c%d: soc_i2c_read_word: failed to generate start. [ 19440] i2c%d: soc_i2c_read_word: failed to read data word. [ 19478] i2c%d: soc_i2c_read_byte_data: failed to generate start. [ 194b4] i2c%d: soc_i2c_read_byte_data: failed to read data byte. [ 194f0] i2c%d: soc_i2c_read_byte_data: failed to gen rep start. [ 1952c] i2c%d: soc_i2c_read_byte_data: failed to send com byte. [ 19568] i2c%d: soc_i2c_write_byte_data: failed to generate start. [ 195a4] i2c%d: soc_i2c_write_byte_data: failed to send data byte. [ 195e0] i2c%d: soc_i2c_write_byte_data: failed to send com byte. [ 1961c] i2c%d: soc_i2c_read_word_data: failed to generate start. [ 19658] i2c%d: soc_i2c_read_word_data: failed to read data word. [ 19694] i2c%d: soc_i2c_read_word_data: failed to gen rep start. [ 196d0] i2c%d: soc_i2c_read_word_data: failed to send com byte. [ 1970c] i2c%d: soc_i2c_write_word_data: failed to send com byte. [ 19748] i2c%d: soc_i2c_block_read: failed to read data byte %d. [ 19784] i2c%d: soc_i2c_block_read: failed to read data count byte. [ 197c0] i2c%d: soc_i2c_block_read: failed to gen rep start. [ 197f8] i2c%d: soc_i2c_block_read: failed to send com byte. [ 19830] i2c%d: soc_i2c_block_read: failed to generate start. [ 19868] i2c%d: soc_i2c_block_write: failed to send byte %d. [ 198a0] i2c%d: soc_i2c_block_write: failed to send count byte. [ 198d8] i2c%d: soc_i2c_block_write: failed to send com byte. [ 19910] i2c%d: soc_i2c_block_write: failed to generate start. [ 19948] xfp_read: addr=0x%x (a0=0x%x) len=%d [ 19970] xfp_read(%d,%d,%x,%p,%d): failed to generate rep start. [ 199ac] xfp_read(%d,%d,%x,%p,%d): failed to send a0 byte. [ 199e0] xfp_read(%d,%d,%x,%p,%d): failed to generate start. [ 19a18] xfp_write: addr=0x%x data=%p len=%d npages=%d [ 19a48] xfp_write: unit=%d cpage=%d START on page_addr=0x%x nbytes=%d [ 19a88] xfp_ack_poll: %d address cycles for wr latency. [ 19abc] xfp_write(u=%d,id=%d,page=%d caddr=%d,data=0x%x,idx=%d) [ 19af8] xfp_write(%d,%d,%d,%d,%d): tx data byte error [ 19b28] xfp_write(%d,%d,%x,%d,%d): failed to send a0 byte [ 19b5c] xfp_write(%d,%d,%x,%d,%d): failed to gen start [ 19b8c] XFP [ 19b90] phycommon_info [ 19ba0] Null [ 19ba8] Internal SERDES [ 19bb8] Unknown [ 19bc0] BCM5400 [ 19bc8] BCM5461 [ 19bd0] BCM5464 [ 19bd8] BCM5466 [ 19be0] BCM5478 [ 19be8] BCM5488 [ 19bf0] BCM54980 [ 19bfc] BCM54680/880 [ 19c0c] BCM53314 [ 19c18] BCM5482/801x [ 19c28] BCM54684 [ 19c34] COMBO [ 19c3c] 65LP [ 19c44] QSGMII65 [ 19c50] COMBO65 [ 19c58] XGXS1 [ 19c60] XGXS2 [ 19c68] XGXS5 [ 19c70] COMBO SERDES [ 19c80] port_phy_addr [ 19c90] User assertion failed: "%s", at %s:%d [ 19cb8] _phys_in_table >= 0 [ 19ccc] phyident.c [ 19cd8] phy_enable [ 19ce4] phy_null [ 19cf0] Phy53314 [ 19cfc] Phy56XXX [ 19d08] serdes_shadow_driver [ 19d20] Phy56XXX5601x [ 19d30] COMBO5601x [ 19d3c] phy_56xxx [ 19d48] SERDES_COMBO shadow regs [ 19d64] QSGMII65/0 [ 19d70] QSGMII65/1 [ 19d7c] QSGMII65/2 [ 19d88] QSGMII65/3 [ 19d94] QSGMII65/4 [ 19da0] QSGMII65/5 [ 19dac] QSGMII65/6 [ 19db8] QSGMII65/7 [ 19dc7] ThЀThЀport_phy_id0 [ 19e14] port_phy_id1 [ 19e64] if_tbi [ 19e6c] phy_autoneg_timeout [ 19e80] serdes_fiber_pref [ 19e94] (ext_pc->pd != NULL) || (int_pc->pd != NULL) [ 19ec4] [ 19ed4] Null PHY Driver [ 19ee4] No-connection PHY Driver [ 19f00] serdes_preemphasis [ 19f14] serdes_driver_current [ 19f2c] serdes_pre_driver_current [ 19f48] serdes_automedium [ 19f5c] serdes_fiber_pref [ 19f70] serdes_sgmii_master [ 19f84] serdes_fifo_low_latency [ 19f9e] , ,<,L,\,l,|Internal QSGMII 65nm SERDES PHY Driver [ 19fdc] serdes_preemphasis [ 19ff0] serdes_driver_current [ 1a008] serdes_pre_driver_current [ 1a024] serdes_lcpll [ 1a034] serdes_automedium [ 1a048] serdes_fiber_pref [ 1a05c] serdes_sgmii_master [ 1a070] serdes_fifo_low_latency [ 1a08a] M0MLM\MlM|MInternal 65nm SERDES PHY Driver [ 1a0c0] serdes_preemphasis [ 1a0d4] serdes_driver_current [ 1a0ec] serdes_pre_driver_current [ 1a108] serdes_automedium [ 1a11c] serdes_fiber_pref [ 1a132] hPhlh|hhhInternal 2.5G SERDES PHY Driver [ 1a168] serdes_preemphasis [ 1a17c] serdes_driver_current [ 1a194] serdes_pre_driver_current [ 1a1b0] serdes_automedium [ 1a1c4] serdes_fiber_pref [ 1a1eb] (8Internal 2.5G SERDES PHY Driver [ 1a210] serdes_preemphasis [ 1a224] serdes_driver_current [ 1a23c] serdes_pre_driver_current [ 1a258] serdes_automedium [ 1a26c] serdes_fiber_pref [ 1a280] phy_an_c73 [ 1a2a4] Internal 2.5G 65nm SERDES PHY Driver [ 1a2cc] XGXS 10G PHY Driver [ 1a2e0] cx4_to_higig [ 1a2f0] xgxs_rx_lane_map [ 1a304] polarity_swap [ 1a314] xgxs_preemphasis [ 1a328] xgxs_driver_current [ 1a33c] xgxs_pre_driver_current [ 1a354] xgxs_tx_lane_map [ 1a368] XGXS5 10G PHY Driver [ 1a380] help [ 1a38c] Displays Help information [ 1a3a8] showThreads [ 1a3b4] Displays running threads information [ 1a3dc] showIfs [ 1a3e4] Displays information about all network interfaces [ 1a418] showMem [ 1a420] displays memory info [ 1a438] exit [ 1a440] exit shell [ 1a44c] Shell Thread [ 1a45d] %s [ 1a464] Welcome to ECOS shell [ 1a47c] **Error: Illegal command:"%s" [ 1a49c] ecos> [ 1a4a4] %s [ 1a4a8] Too many arguments - stopped at: '%s' [ 1a4d0] Unbalanced string! [ 1a4e4] %s [ 1a4ec] Ambiguous command '%s', choices are: %s [ 1a514] %s %s [ 1a520] ID: %04x name: %10s pri: %d state: %d [ 1a548] ---- [ 1a550] Memory Information: Total %d Free %d Max %d [ 1a5cf] dɬɬ@ɬɴɴɴɴɼɼɼɼɼɴɼɼɼɴɼɼɼpɬ|ɬɬɴɴɈɬɴɴɬɴɴɴɴɼɼɴɬɴɴɼɴɴɴɴɴɴɬɬɴɬɴɔɴɴɴɴɼɼɴɼɴɬɴɴɠɴɴɼɴɼɴɬɴɴɬɴɼɴɴɬɴɼɴɼ܀܀؀ˤ؀lddddddP l Plllllll```lllllll`ӤTdtմմԄմԔմմԤմԴĀԀմմմմ܀܀܀܀܀մ܀܀܀܀܀$4DTմ܀܀d܀tՄՔմմ8մմդ܀մ܀ռ̀܀܀քll||||֔|||||֔֔֔֔֔֔֔֔ք֔֔֔֌֔֔֜  $<,4<L\\\DLLLT\\../../../../src/system_support/base/infrastructure/cnfgr/base/cnfgr_ctrl.c [ 1ab0b] p刀`刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀`刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀刀怀怀$@P怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀`怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀怀p怀怀@@謀Ȁ<L\l|||脀鐀`p ꜀ꨀ글ĀԀԀԀ܀쬀케̀../../../../src/system_support/base/infrastructure/cnfgr/base/cnfgr_msg.c [ 1ae28] cnfgrMsgHandler: Discarded msg on Q1 %08x [ 1ae54] cnfgrMsgHandler: Discarded msg on Q2 %08x [ 1ae80] cnfgrMsgHandler: Bad status on Q1 or invalid message pointer %08x [ 1aec4] Cnfgr_Msg_Q1 [ 1aed4] cnfgrMsgInitialize: Failed to create Garp Q1, exiting.... [ 1af10] Cnfgr_Msg_Q2 [ 1af20] cnfgrMsgInitialize: Failed to create Message Handler Q2, exiting.... [ 1af68] Cnfgr_Thread [ 1af78] cnfgrMsgInitialize: Failed to create Message Handler Thread, exiting.... [ 1afc4] cnfgrMsgSend: Invalid Message %08x [ 1afe8] SIM [ 1afec] NIM [ 1aff0] TRAPMGR [ 1aff8] CNFGR [ 1b000] DRIVER [ 1b008] POLICY [ 1b010] DOT1Q [ 1b018] PBVLAN [ 1b020] DOT3AD [ 1b028] STATSMGR [ 1b034] LTS [ 1b038] USMDB [ 1b040] LAYER3 [ 1b048] CUSTOM [ 1b050] FDB [ 1b054] GARP [ 1b05c] SNMP [ 1b064] DTL [ 1b068] USER_MGR [ 1b074] CLI_WEB [ 1b07c] CMDLOGGER [ 1b088] CMD_LOGGER [ 1b094] IP [ 1b098] RTR_DISC [ 1b0a4] OSPF [ 1b0ac] RIP [ 1b0b0] IGMP [ 1b0b8] MCAST [ 1b0c0] PIMDM [ 1b0c8] DVMRP [ 1b0d0] PIMSM [ 1b0d8] VRRP [ 1b0e0] PACKAGES [ 1b0ec] MPLS [ 1b0f4] BGP [ 1b0f8] ACL [ 1b0fc] QOS_ACL [ 1b104] COS [ 1b108] QOS_COS [ 1b110] DIFFSERV [ 1b11c] QOS_DIFFSERV [ 1b12c] MIRROR [ 1b134] PORT_MIRROR [ 1b140] MFDB [ 1b148] FILTER [ 1b150] IP_HELPER [ 1b15c] DHCP_FLTR [ 1b168] DHCP_FILTERING [ 1b178] SNOOP [ 1b180] SNOOPING [ 1b18c] GMRP [ 1b194] SERV_PORT [ 1b1a0] SERVICE_PORT_PRESENT [ 1b1b8] CABLETEST [ 1b1c4] CABLE_TEST [ 1b1d0] DOT1S [ 1b1d8] RADIUS [ 1b1e0] TACACS [ 1b1e8] DOT1X [ 1b1f0] DHCPS [ 1b1f8] DVLANTAG [ 1b204] IPV6_PROV [ 1b210] IPV6_PROVISIONING [ 1b224] OPENSSL [ 1b22c] SSLT [ 1b234] SSHD [ 1b23c] DOT1P [ 1b244] UNITMGR [ 1b24c] CARDMGR [ 1b254] STACKING [ 1b260] EDB [ 1b264] CDA [ 1b268] FFTP [ 1b270] OSAPI [ 1b278] POE [ 1b27c] SCRIPT [ 1b284] LOG [ 1b288] SNTP [ 1b290] OUTB_TNET [ 1b29c] OUTBOUND_TELNET [ 1b2ac] PORT_ML [ 1b2b4] PORT_MACLOCK [ 1b2c4] OSPFV3 [ 1b2cc] IPV6 [ 1b2d4] RLIM [ 1b2dc] DHCP6S [ 1b2e4] DOS [ 1b2e8] DENIAL_OF_SERVICE [ 1b2fc] LLDP [ 1b304] IPSUBVLAN [ 1b310] IP_SUBNET_VLAN [ 1b320] MACVLAN [ 1b328] MAC_VLAN [ 1b334] PROT_PORT [ 1b340] PROTECTED_PORT [ 1b350] DNS_CLIENT [ 1b35c] WIRELESS [ 1b368] ALARMMGR [ 1b374] CHSS_ALARM [ 1b380] CHASSIS_ALARM [ 1b390] POWERMGR [ 1b39c] FANMGR [ 1b3a4] BSP [ 1b3a8] IPV6_MGMT [ 1b3b4] MFC [ 1b3b8] VOICE_VLAN [ 1b3c4] DHCP_SNP [ 1b3d0] DHCP_SNOOPING [ 1b3e0] DAI [ 1b3e4] DYNAMIC_ARP_INSPECTION [ 1b3fc] VOIP [ 1b404] QOS_VOIP [ 1b410] ISDP [ 1b418] SFLOW [ 1b420] CPTV_PRTL [ 1b42c] CAPTIVE_PORTAL [ 1b43c] CP WIO [ 1b444] CAPTIVE_PORTAL_WIRED_INTF_OWNER [ 1b464] DOT1AD [ 1b46c] DOT3AH [ 1b474] DOT3AH/EFM-OAM [ 1b484] MGMT_ACAL [ 1b490] BOXSERV [ 1b498] BOX_SERVICES [ 1b4a8] LINK_DEP [ 1b4b4] LINK_DEPENDENCY [ 1b4c4] RMON [ 1b4cc] TR069 [ 1b4d4] AUTO_INST [ 1b4e0] AUTO_INSTALL [ 1b4f0] DHCPCLIENT [ 1b4fc] DHCP_CLIENT [ 1b508] BOOTP [ 1b510] BOOTP_CLIENT [ 1b520] ISCSI [ 1b528] QOS_ISCSI [ 1b534] DHCP6C [ 1b53c] DHCP6_CLIENT [ 1b54c] LOOP_PROT [ 1b558] ../../../../src/system_support/base/infrastructure/cnfgr/base/cnfgr_tally.c [ 1b5a4] CNGR [ 1b5ac] ../../../../src/system_support/base/infrastructure/cnfgr/base/cnfgr_trace.c [ 1b5f8] CNFGR: unable to create the trace buffer [ 1b624] CNFGR: unable to delete the trace buffer [ 1b650] cnfgrTraceModeApply: Unable to apply CNFGR trace mode (%u), handle=0x%8.8x [ 1b69c] P1 [ 1b6a0] Event=%-22s [ 1b6b0] Fini [ 1b6b8] %-7s [ 1b6c0] Start [ 1b6c8] EVNT_FIRST [ 1b6d4] P2 [ 1b6d8] WMU [ 1b6dc] P3 [ 1b6e0] U_CMPLT [ 1b6e8] E [ 1b6ec] U_P1 [ 1b6f4] U_P2 [ 1b6fc] UNKNOWN [ 1b707] HЀT`lxP1_START [ 1b734] correlator = %-8d [ 1b748] compId=%-8d(%-20s) correlator = %-8d [ 1b770] REQ_FINISH [ 1b77c] P2_START [ 1b788] P3_START [ 1b794] E_START [ 1b79c] U_P1_START [ 1b7a8] U_P2_START [ 1b7b7] $0<HT`l [ 1b7d8] %4lu: [ 1b7e0] %2.2x [ 1b7e8] - [ 1b7ec] CNFR_EVENT> [ 1b7f8] ###### [ 1b800] CNFGR_EVENTPCOMP> [ 1b814] %-15s: [ 1b81c] ts=%4.4d [ 1b828] *** ERROR (cannot format this entry) *** [ 1b856] Could not locate Card Manager trace block for handle 0x%8.8x [ 1b894] enabled [ 1b89c] disabled [ 1b8a8] Tracing is %s [ 1b8b8] Trace mask is %s [ 1b8cc] %-30s - print CNFGR tracing configuration [ 1b8f8] cnfgrTraceConfigPrint() [ 1b910] %-30s - 1 is enabled, 0 is disabled [ 1b938] cnfgrTraceModeApply(enable) [ 1b954] %-30s - Display CNFGR trace buffer [ 1b978] cnfgrTraceShow(numEntries,format) [ 1b99c] osapiMalloc failed at %s : %d [ 1b9bc] cnfgrProfileInit [ 1b9d0] Profiling is %s [ 1b9e4] Cnfgr Profiling is not enabled. [ 1ba09] Total time spent in configurator states [ 1ba34] P1 (ms) P2 (ms) P3 (ms) WMU (ms) E (ms) U_P1 (ms) U_P2 (ms) [ 1ba90] ------- ------- ------ ------- ------- -------- -------- [ 1baec] %-8d %-8d %-8d %-8d %-8d %-8d %-8d [ 1bb2a] Total time spent in configurator states per component [ 1bb64] CompId P1 (ms) P2 (ms) P3 (ms) WMU (ms) E (ms) U_P1 (ms) U_P2 (ms) [ 1bbf8] ----------------------- ------- ------ ------ ------- ------- -------- ------- [ 1bc88] %-2d-%-25s %-8d %-8d %-8d %-8d %-8d %-8d %-8d [ 1bcf0] %-30s - Enable cnfgr events profiling [ 1bd18] cnfgrProfileModeSet(enable) [ 1bd34] %-30s - Show cnfgr events profiling configuration [ 1bd68] cnfgrProfileConfigShow() [ 1bd84] %-30s - Show profiling Information for cnfgr events [ 1bdbc] cnfgrProfileInfoShow() [ 1bdd4] 1.1.4 [ 1bddc] 1.1.4 [ 1bde6] 6h7D7p7Ā7../../../../src/application/base/dos/dos_cnfgr.c [ 1be2c] dos_Queue [ 1be38] doSCnfgrInitPhase1Process: msgQueue creation error. [ 1be70] doSCnfgrInitPhase1Process: Task could not be started. [ 1bea8] doSCnfgrInitPhase1Process: could not allocate memory to dosIntfInfo. [ 1bef0] doSCnfgrInitPhase1Process: could not allocate memory to dosMapTbl. [ 1bf34] doSCnfgrInitPhase1Process: Unable to create r/w lock for DOSCONTROL [ 1bf7c] L7_DOSCONTROL_COMPONENT_ID: Unable to register with NIM [ 1bfb8] dos.cfg [ 1bfc0] ../../../../src/application/base/dos/dos_util.c [ 1bff0] Error accessing DOS config data for interface %d in dosMapIntfIsConfigurable. [ 1c040] Received an interface change callback while not ready to receive it [ 1c084] ../../../../src/dtl/base/dtl_cnfgr.c [ 1c0ac] DTL: Failed to initialize DAPI [ 1c0cc] DTL: Task failed to start [ 1c0e8] ../../../../src/dtl/base/dtl_event.c [ 1c110] DTL: link change msg send failed, mrc=%d [ 1c13c] DTL: link change msg queue full , mrc=%d [ 1c16a] \\\\\[\ \\\\\\\\\\\\\\SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 1c1f0] ../../../../src/dtl/base/dtl_pdu_landd.c [ 1c21c] dtlPduReceiveCallback [ 1c234] DTL: pdu receive msg send failed, mrc=%d [ 1c260] DTL: dtl pdu receive msg queue full , mrc=%d [ 1c290] invalid usp [ 1c2a0] dtlPduReceive [ 1c2b0] dtlPduTransmit [ 1c2c0] 33 [ 1c2c4] lldpApiCnfgrCommand(): message send failed [ 1c2f0] ../../../../src/application/base/dot1ab/lldp_cnfgr.c [ 1c328] lldp_Queue [ 1c334] lldpInit: msgQueue creation error. [ 1c358] lldpInit(): message send failed [ 1c37c] LLDPManAddrBufs [ 1c38c] LLDPUnTLVBufs [ 1c39c] LLDPOrgDefBufs [ 1c3ac] 802.1AB: Failed to register with NIM [ 1c3d4] lldpPduReceiveCallback [ 1c3ec] lldpCfgData.cfg [ 1c3fe] uvvww../../../../src/application/base/dot1ab/lldp_med.c [ 1c444] LLDP-MED registrar ID %u already registered [ 1c474] LLDP-MED registrar ID %u greater than Last Component ID [ 1c4b0] lldpXMedPolicyEventCallback(): message send failed [ 1c4e8] 7.7.7.7 [ 1c4f4] rrr ttt [ 1c500] software revision 4.5 [ 1c518] serial number 777 [ 1c52c] Broadcom Corp. [ 1c53c] Model XGS3 [ 1c548] asset 1717 [ 1c554] 100777100777 [ 1c568] LLDP-MED Remote Data [ 1c580] ===================== [ 1c599] ===================== [ 1c5b0] Local Interface: %d [ 1c5c8] Remote MED Data [ 1c5dc] ------------------------------------------------- [ 1c610] Remote Entry not present [ 1c62c] MED CAP TLV DeviceClass not present [ 1c654] MED Cap TLV Device Class: %d [ 1c674] MED CAP TLV cap sup not present [ 1c698] MED CAP TLV cap supported: 0x%x 0x%x [ 1c6c0] MED CAP TLV cap cur not present [ 1c6e4] MED CAP TLV cap cur : 0x%x 0x%x [ 1c708] MED Net Policy %d not present [ 1c728] MED Net Policy %d vlan id %d [ 1c748] MED Net Policy %d unknown %d [ 1c768] MED Net Policy %d tagged %d [ 1c788] MED Net Policy %d priority %d [ 1c7a8] MED Net Policy %d dscp %d [ 1c7c4] MED location TLV type %d Info %s [ 1c7e8] MED Ext Power TLV not present [ 1c808] MED Ext Power TLV Device type: %d [ 1c82c] MED PSE TLV Source not present [ 1c84c] MED PSE TLV Source: %d [ 1c864] MED PSE TLV Priority not present [ 1c888] MED PSE TLV Priority: %d [ 1c8a4] MED PSE TLV Average not present [ 1c8c8] MED PSE TLV Average: %d [ 1c8e4] MED PD TLV Source not present [ 1c904] MED PD TLV Source: %d [ 1c91c] MED PD TLV Priority not present [ 1c940] MED PD TLV Priority: %d [ 1c95c] MED PD TLV Req not present [ 1c978] MED PD TLV Req: %d [ 1c98c] MED Inventory TLV HW: %s [ 1c9a8] MED Inventory TLV FW: %s [ 1c9c4] MED Inventory TLV SW: %s [ 1c9e0] MED Inventory TLV SNO: %s [ 1c9fc] MED Inventory TLV Mfg Name: %s [ 1ca1c] MED Inventory TLV Model Name: %s [ 1ca40] MED Inventory TLV Asset ID: %s [ 1ca60] ------------------------------------------------- [ 1ca94] MED Location TLV type %d not present [ 1cabc] ../../../../src/application/base/dot1ab/lldp_rdb.c [ 1caf0] %s: Error allocating data for lldp remote DB Tree [ 1cb24] lldpRemoteDBInit [ 1cb38] lldp remote index Bufs [ 1cb50] %s: Error allocating buffers [ 1cb70] %s: Failed to lldp remote index linked list [ 1cba0] %s:%d Error allocating the node to the remote index for intf %d [ 1cbe4] lldpRemEntryAdd [ 1cbf4] %s: Failed to add the node to the remote node list [ 1cc28] %s:%d Error Adding the node to the Remote Tree for intf %d [ 1cc68] lldpRemLastChangeTimeUpdate failed to send change notification. [ 1cca8] ../../../../src/application/base/dot1ab/lldp_util.c [ 1ccdc] Out of system buffers. [ 1ccf4] Error accessing LLDP config data for interface %s in lldpMapIntIfNum. [ 1cd3c] lldpIntfTxModeApply(): LLDPDU Transmit Failed!. Unable to reserve network buffer for transmission [ 1cda0] lldpIntfChangeCallback(): message send failed [ 1cdd0] Received an interface change callback while not ready to receive it [ 1ce17] (dըը؀ըը [ 1ce57] (dlldpPduReceiveCallback(): lldpQueue has not been created! [ 1ce98] lldpPduReceiveCallback(): message send failed. Message Queue is full [ 1cee0] SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 1cf14] lldpPduReceiveProcess [ 1cf2c] lldpTimerCallback(): timer send failed [ 1cf54] lldpTimerCallback(): lldpQueue has not been created! [ 1cf8c] lldpTimerProcess(): LLDPDU Transmit Failed! Unable to reserve network buffer for transmission [ 1cff0] 802.1AB Configuration [ 1d008] ===================== [ 1d020] Transmit Interval: %i [ 1d038] Transmit Hold Multiplier: %i [ 1d058] Notification Interval: %i [ 1d074] Reinit Delay: %i [ 1d089] Interfaces Configured: [ 1d0a5] ===================== [ 1d0bc] Interface: %d [ 1d0cc] Disabled [ 1d0d8] Enabled [ 1d0e0] Transmit Mode: %s [ 1d0f4] Receive Mode: %s [ 1d108] Notification Mode: %s [ 1d120] Transmit TLVs: [ 1d130] N [ 1d134] Y [ 1d138] Port Description: %s [ 1d150] System Name: %s [ 1d164] System Description: %s [ 1d180] System Capability: %s [ 1d19c] Mgmt Addr: %s [ 1d1b0] Up [ 1d1b4] Down [ 1d1bc] Link: %s [ 1d1c8] txTTR: %i [ 1d1d4] rxFrame: %s [ 1d1e5] Interface Configuration: [ 1d200] 802.1AB Remote Data [ 1d218] =================== [ 1d230] Local Interface: %d [ 1d248] Remote Data [ 1d258] ------------------------------------------------- [ 1d28c] Time to Live: %i [ 1d2a0] Chassis Id Subtype: %i [ 1d2b8] Chassis Id: %s [ 1d2c8] Port Id Subtype: %i [ 1d2e0] Port Id: %s [ 1d2f0] Port Description: %s [ 1d308] System Name: %s [ 1d31c] System Description: %s [ 1d334] System Capabilities: %i %i [ 1d350] ------------------------------------------------- [ 1d384] %02X:%02X:%02X:%02X:%02X:%02X [ 1d3a4] TimeStamp: %u [ 1d3b4] remote index: %u [ 1d3c8] Mgmt Address Family: IPv4 [ 1d3e4] Mgmt Address Family: %u [ 1d400] Mgmt Address: %u.%u.%u.%u [ 1d41c] Mgmt Address Family: 802 [ 1d438] Mgmt Address Family: IPv6 [ 1d454] 802.1AB Statistics [ 1d468] Remote Table Inserts: %i [ 1d484] Remote Table Ageouts: %i [ 1d4a0] Remote Table Deletes: %i [ 1d4bc] Remote Table Drops: %i [ 1d4d4] Interface Statistics : %d [ 1d4f0] Tx Frames Total: %i [ 1d508] Rx Frames Total: %i [ 1d520] Rx Ageouts: %i [ 1d530] Rx Frames Discarded: %i [ 1d54c] Rx Frames Errors: %i [ 1d564] Rx TLVs Discarded: %i [ 1d57c] Rx TLVs Unrecognized: %i [ 1d598] Rx TLVs MED: %i [ 1d5ac] Rx TLVs 8023: %i [ 1d5c0] Rx TLVs 8021: %i [ 1d5d4] lldp-MED Tx enabled interface %d fast start set to %d [ 1d60c] lldp-MED Tx disabled interface %d fast start set to 0 [ 1d644] LLDP-MED Debug Tx Flag Set [ 1d660] LLDP-MED Debug Tx Flag Reset [ 1d693] 0\t匀夀开log.cfg [ 1d6b4] logSave: Error %d return from osapiFsWrite for file %s [ 1d6ec] logReadConfig: %s(%d) - unable to read config file %s [ 1d724] ../../../../src/system_support/base/infrastructure/log/log_cfg.c [ 1d768] INIT 0 [ 1d770] INIT 1 [ 1d778] INIT 2 [ 1d780] WMU [ 1d784] INIT 3 [ 1d78c] EXECUTE [ 1d794] UNCONFIG 1 [ 1d7a0] UNCONFIG 2 [ 1d7ac] logCnfgrStateSet: LOG configuration state set to %s [ 1d7e4] logCnfgrInitPhase2Process: Could not register with nvStore [ 1d823] tlogCfgTask: Bad status on receive message from cfg queue %08x [ 1d874] LogCfgQ [ 1d87c] LOGC [ 1d884] logCfgTaskCreate: Unable to syncronize with LOG Cfg processing task [ 1d8dc] ../../../../src/system_support/base/infrastructure/log/log_cnfgr.c [ 1d920] loggingInit: %s(%d) unable to allocate log configuration [ 1d95c] FAULT: 0x%x, 1: 0x%x, 2: 0x%x, 3: 0x%x, 4: 0x%x, 5: 0x%x, 6: 0x%x, 7: 0x%x 8: 0x%x [ 1d9b0] %s [ 1d9b4] File: %s, Line: %d, Error %d (0x%x) [ 1d9dc] Error %d (0x%x) [ 1d9ec] log_error_code %s %d [ 1da04] ../../../../src/system_support/base/infrastructure/log/log_debug.c [ 1da48] LOG number %d - This is a veeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeery long message!!!!!!!!!!!!!!!!!!!!!!!!!! [ 1dac0] LOG - This is a veeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeery long message!!!!!!!!!!!!!!!!!!!!!!!!!! [ 1db2c] 192.168.21.50 [ 1db3c] 192.168.21.51 [ 1db4c] Host 1 [ 1db54] Host 2 [ 1db5c] LOG - Hi Mom! [ 1db6c] log unit test 2-a failed on host add [ 1db94] log unit test 2-b failed on host status [ 1dbc0] log unit test 2-c failed on port set [ 1dbe8] log unit test 2-d failed on port retrieve [ 1dc14] log unit test 2-e failed on component set [ 1dc40] log unit test 2-f failed on component retrieve [ 1dc70] log unit test 2-h failed on severity set [ 1dc9c] log unit test 2-i failed on severity retrieve [ 1dccc] 198.82.162.213 [ 1dcdc] log unit test 3-a failed on host add [ 1dd04] LOGF - Formatted output: %d %d %d %d [ 1dd2c] LOGNC - Hi Mom! [ 1dd3c] LOGFNC - Formatted output %d [ 1dd5c] Hi Mom! [ 1dd64] --%d [ 1dd72] In memory log -- [ 1dd84] %d - [ 1dd96] Persistent log -- [ 1ddac] severity %d [ 1ddb8] component %d [ 1ddc8] Severity must be between %d and %d. [ 1ddf0] Component must be between %d and %d. [ 1de18] logUnitTestCustom(,,'message') [ 1de5c] %s was added [ 1de6c] %s was not added [ 1de80] %s [ 1de84] functions being removed [ 1dea0] log_error_debug_func_add('func(args)') - add func and args to function list [ 1def0] log_error_debug_func_list_flush() - clear the func list [ 1df30] log_error_debug_wait_set(sec) - set time to wait after exec(-1=forever) [ 1df84] log_error_debug_func_list() - list funcs to be executed [ 1dfc8] log_error_func_exec() _ execute func list [ 1e004] Invalid size: %d. Max size is %d [ 1e028] Test Event #%d [ 1e038] %s [ 1e03c] ASYNC_LOG [ 1e04a] logIndex is %d bufIndex is %d [ 1e06c] buff Len is %d [ 1e080] (Unable to format log message) [ 1e0a0] ../../../../src/system_support/base/infrastructure/log/log_server.c [ 1e0e4] %s %d %d:%d:%d [ 1e0f4] PM [ 1e0f8] %s %02d %02d:%02d:%02d %s [ 1e114] AM [ 1e118] Event(0x%lx) [ 1e128] UNKN [ 1e130] %.19s %s[%d]: %s(%d) -- %s [ 1e150] <%d> %.19s %s-%d %s[%d]: %s(%d) %d %%%% [ 1e17c] <%d> %.19s %s-%d %s[%d]: %d %%%% [ 1e1a0] socket open failed - errno %d [ 1e1c0] Can't bind socket to local address %lx port %d - errno %d [ 1e1fc] syslog - Can't set SO_RCVBUF to 0 - errno %d [ 1e22c] logTask: queue not initialized [ 1e24c] logTask: osapiMsgReceive failed - errno (0x%x) [ 1e27c] logServerInit: %s(%d): unable to allocate operational data! [ 1e2bc] logServerInit %s(%d): unable to create semaphore! [ 1e2f0] logServerInit %s(%d): unable to allocate buffer pool! [ 1e328] LogQ [ 1e330] logServerInit %s(%d):unable to allocate buffer pool for PersistentLogs! [ 1e37c] logServerInit %s(%d): unable to create message queue! [ 1e3b4] LOG [ 1e3b8] logServerInit %s(%d): unable to create log task! [ 1e3ec] logServerInit: %s(%d) - unable to obtain configuration data! [ 1e42c] logWriteInMemoryLogToFile: osapiFsDeleteFile failed [ 1e460] logWriteInMemoryLogToFile: osapiFsCreateFile failed [ 1e495] LOG Status [ 1e4a4] Disabled [ 1e4b0] Global Admin Status: %s [ 1e4cc] Enabled [ 1e4d4] Memory admin status: %s [ 1e4f0] Wrap [ 1e4f8] Memory behavior: %s [ 1e510] Memory component filter: %d [ 1e530] Memory severity filter: %d [ 1e54c] Memory log size (configured): %d entries [ 1e578] Memory log size (actual): %d entries [ 1e5a0] Memory log count: %d entries [ 1e5c0] Console admin status: %s [ 1e5dc] Console component filter: %d [ 1e5fc] Console severity filter: %d [ 1e61c] Local port: %hd [ 1e630] Persistent admin status: %s [ 1e650] Persistent severity filter: %d [ 1e670] Persistent log count: %d entries [ 1e694] Syslog admin status: %s [ 1e6b0] Syslog default facility: %d [ 1e6d1] host[%d] status: %d [ 1e6e9] host[%d] address: %s [ 1e700] Log messages received: %d [ 1e71c] Log messages dropped due to lack of resource: %d [ 1e750] Log messages not sent to stack manager : %d [ 1e780] Log messages dropped due to logging disabled: %d [ 1e7b4] Last receive time: %d [ 1e7cc] Memory log messages dropped due to configuration: %d [ 1e804] Persistent log messages dropped due to configuration: %d [ 1e840] Console log messages dropped due to configuration: %d [ 1e878] Syslog messages relayed: %d [ 1e898] Syslog message delivered time: %d [ 1e8bc] Startup log message count: %d [ 1e8dd] host[%d] address type: %d [ 1e8f9] host[%d] port: %d [ 1e90d] host[%d] component: %d [ 1e929] host[%d] severity: %d [ 1e941] host[%d] description: %.*s [ 1e961] host[%d] messages sent: %d [ 1e980] Stop on full [ 1e991] Buffered Log Count: %d [ 1e9ad] Buffered Log [ 1e9c0] persist.txt [ 1e9cc] ../../../../src/system_support/base/services/mirroring/mirror_api.c [ 1ea10] nimIntfQuery failed for intIfNum %s [ 1ea3a] mirrorSourcePortSet::Sending Dtl Port Modify command.Session :%d,Source Interface: %d,ProbeType: %d [ 1eaa0] mirrorSourcePortSet failed to disable source interface %s in direction %d in session %d. [ 1eb08] mirrorSourcePortSet failed to enable source interface %s in direction %d in session %d. [ 1eb72] Entering mirrorSourcePortAdd::Session :%d,Source Interface: %d,ProbeType: %d [ 1ebc2] mirrorSourcePortAdd::Calling mirrorNimEventIntfNotify with L7_PROBE_SETUP for Interface: %d. [ 1ec22] mirrorSourcePortRemove::Calling mirrorNimEventIntfNotify with L7_PROBE_TEARDOWN for Interface: %d. [ 1ec8a] Entering mirrorSourcePortRemove::Session :%d,Source Interface: %d [ 1ecd2] mirrorIsActiveProbePort:: Error!!Number of source interface : %d is greater than Maximum number of source interfaces allowed : %d. [ 1ed5a] Entering mirrorDestPortSet::Session :%d,Destination Interface: %d [ 1eda2] Entering mirrorDestPortRemove::Session :%d [ 1edd1] SourceInterface Direction [ 1edee] mirrorDestPortRemove::Calling mirrorNimEventIntfNotify with L7_PROBE_TEARDOWN for Interface: %d. [ 1ee51] %14d %5d [ 1ee5e] mirrorDestPortRemove::Sending Dtl Session Config command.Session :%d,Destination Interface: %d,:No.of Source Interfaces: %d [ 1eede] mirrorDestPortRemove:: Error!!Number of source interface : %d is greater than Maximum number of source interfaces allowed : %d. [ 1ef62] Entering mirrorModeSet::Session :%d , Mode :%d [ 1ef96] Entering mirrorConfigRemove::Session :%d [ 1efc2] mirrorConfigRemove:: Error!!Number of source interface : %d is greater than Maximum number of source interfaces allowed : %d. [ 1f046] Entering mirrorConfigRemoveAll. [ 1f069] Source Interface Direction [ 1f08a] mirrorSessionConfig::Calling mirrorNimEventIntfNotify with L7_PROBE_TEARDOWN for Interface: %d. [ 1f0ee] mirrorSessionConfig::Calling mirrorNimEventIntfNotify with L7_PROBE_SETUP for Interface: %d. [ 1f14e] mirrorSessionConfig::Sending Dtl Session Config command.Session :%d,Destination Interface: %d,:No.of Source Interfaces: %d [ 1f1ce] mirrorSessionConfig:: Error!!Number of source interface : %d is greater than Maximum number of source interfaces allowed : %d. [ 1f252] Entering mirrorSessionConfig::SessionNum: %d. [ 1f284] mirrorCfgData.cfg [ 1f298] Error on call to sysapiCfgFileWrite routine on config file %s [ 1f2d8] ../../../../src/system_support/base/services/mirroring/mirror_cfg.c [ 1f31d] Creating Interface : %d [ 1f339] mirrorIntfApplyConfigData: Invalid Configuration. Source port %s Configured without configuring valid direction %d. Defaulting direction to Bidirectional. [ 1f3f2] mirrorIntfApplyConfigData::Calling mirrorNimEventIntfNotify with L7_PROBE_SETUP for Interface: %d. [ 1f46c] mirrorIntfApplyConfigData(): Failed to get direction for port %s [ 1f4b0] mirrorIntfChangeCallback: Received an interface event callback while not in EXECUTE state. [ 1f50c] Mirroring: Failed to notify components of probe status change [ 1f54e] \]^^h^h../../../../src/system_support/base/services/mirroring/mirror_cnfgr.c [ 1f5a8] mirrorCfgData.cfg [ 1f5be] File Header Data [ 1f5d1] File Name: %s [ 1f5e1] Version: %d [ 1f5f1] Component ID: %d [ 1f605] File Size: %d [ 1f614] No [ 1f618] Yes [ 1f61d] Data Changed: %s [ 1f632] Configuration of session %u [ 1f652] mirrorConfigDump:: Error!! Number of source interface : %d is greater than Maximum number of source interfaces allowed : %d. [ 1f6fc] is not set [ 1f70d] Source Ports %s [ 1f720] Destination Port is [ 1f738] not set [ 1f744] %u.%u.%u [ 1f750] DISABLE [ 1f758] ENABLE [ 1f760] Status : %s [ 1f771] %u.%u.%u [ 1f77c] Probe Type is [ 1f790] BIDIRECTIONAL [ 1f7a0] Error!!! Direction unconfigured [ 1f7c0] INGRESS [ 1f7c8] EGRESS [ 1f7d0] Built test config data [ 1f7e9] Scaling Constants [ 1f7fc] ----------------- [ 1f810] L7_MIRRORING_MAX_SESSIONS - %d [ 1f830] mirrorCfgData->checkSum : %u [ 1f851] Mirror Trace Mode:Enable [ 1f86d] Mirror Trace Mode:Disable [ 1f889] Valid Source Interfaces. [ 1f8a5] %d [ 1f8ad] Valid Destination Interfaces. [ 1f8d0] ../../../../src/system_support/base/infrastructure/nim/nim_cnfgr.c [ 1f914] Bad config id type [ 1f92a] i(i(i(i`ii`iiiiiNIM Control block not created [ 1f974] NIM: Tasks and queues not created [ 1f998] NIM registrant notification list not created [ 1f9c8] NIM syncronization read write lock not created [ 1f9f8] NIM: Unable to allocate resources [ 1fa1c] NIM: Unable to allocate resources for configId AVL tree [ 1fa58] NIM: nimPhaseOneFini called in strange sequence [ 1fa8c] NIM:Couldn't create memory for the nimFileName [ 1fabc] NIM: nimPhaseTwoFini called [ 1fadc] NIM: unable to alloc memory for nimPorts [ 1fb08] NIM:Couldn't allocate memory for nimNumberOfPortPerUnit [ 1fb44] NIM: unable to alloc nimVlanSlotsInfo [ 1fb6c] NIM: unable to alloc numberOfInterfacesByType [ 1fb9c] NIM: attempting to clear the data in an incorrect phase! [ 1fbd8] NIM-Q [ 1fbe0] NIM queue not created [ 1fbf8] nim_t [ 1fc00] NIM: Could not sync the TASK [ 1fc20] NIM task not created. [ 1fc3a] }H~\~~~../../../../src/system_support/base/infrastructure/nim/nim_config.c [ 1fc90] NIM:Couldn't allocate memory for the nimConfigData [ 1fcc4] NIM: Memory not created for config file [ 1fcf0] NIM: Failed to read the config data [ 1fd18] NIM: Failed to set the offsets in the config file [ 1fd4c] %s [ 1fd50] nimStack.cfg [ 1fd60] NIM: Control block or config data not valid [ 1fd90] NIM: Error on call to nimEncapsulationTypeSet with internal intf %d [ 1fdd8] NIM: Error on call to nimSetIntfAdminState with internal intf %d [ 1fe1c] NIM: Error on call to nimSetIntfLinkTrap with internal interface number %d [ 1fe68] NIM: Error on call to nimSetIntfAddrType with internal interface number %d [ 1feb4] NIM: Error on call to nimSetIntfConfigMaxFrameSize with internal interface number %d [ 1ff0c] NIM: Error on call to nimSetIntfNegotiationCapabilities with internal interface number %d [ 1ff68] NIM: Error on call to nimSetIntfSpeed with internal interface number %d [ 1ffb8] NIM: Config file not allocated during init [ 1ffe4] NIM: nimCtlBlk_g not allocated [ 20004] NIM: Config buffer not allocated [ 20028] phase is L7_CNFGR_STATE_P1 [ 20044] Number Components registered = %d [ 20068] Task ID of nimTask is %lx [ 20084] LinkStateMask[%d] = %0.2x [ 200a0] forwardStateMask[%d] = %0.2x [ 200c0] Msg Queue is %lx [ 200d4] Max units=%d , slots/unit=%d , phys ports/slot=%d [ 20108] FALSE [ 20110] TRUE [ 20118] NIM printLog is set to %s [ 20134] createdMask[%d] = %0.2x [ 20154] presentMask[%d] = %0.2x [ 20170] physicalIntfMask[%d] = %0.2x [ 20190] cpuIntfMask[%d] = %0.2x [ 201ac] lagIntfMask[%d] = %0.2x [ 201c8] vlanIntfMask[%d] = %0.2x [ 201e4] l2tnnlIntfMask[%d] = %0.2x [ 20200] ********* Config data ********** [ 20224] The Config Mask BITMAP of used indices [ 2024c] Bitmap[%d]= %0.2x [ 20260] *********** INTIFNUM %d ************** [ 2028c] The number of interfaces in unit %d = %d [ 202b8] phase is L7_CNFGR_STATE_P2 [ 202d4] phase is L7_CNFGR_STATE_P3 [ 202f0] phase is L7_CNFGR_STATE_WMU [ 20310] phase is L7_CNFGR_STATE_E [ 2032c] phase is Not in P1,P2,P3,WMU, or E [ 20353] ,osapiMsgQueueGetNumMsgs failed [ 20384] NIM Messages in queue: %d, max: %d [ 203a8] ../../../../src/system_support/base/infrastructure/nim/nim_debug.c [ 203ec] Val = %d [ 203f8] %s [ 203fc] %s:%d : [ 20408] UNKNOWN [ 20410] L7_PHYSICAL_INTF [ 20424] L7_STACK_INTF [ 20434] L7_CPU_INTF [ 20440] L7_MAX_PHYS_INTF_VALUE [ 20458] L7_LAG_INTF [ 20464] L7_UNUSED1_INTF [ 20474] L7_LOGICAL_VLAN_INTF [ 2048c] L7_LOOPBACK_INTF [ 204a0] L7_TUNNEL_INTF [ 204b0] L7_WIRELESS_INTF [ 204c4] L7_CAPWAP_TUNNEL_INTF [ 204dc] L7_MAX_INTF_TYPE_VALUE [ 204f7] $0<HT`lxconfigInterfaceId = type:%s, [ 20544] vlanId:%u [ 20550] dot3adIntf:%u [ 20560] usp:%d.%d.%d [ 20570] loopbackId:%u [ 20580] tunnelId:%u [ 20590] wirelessNetId:%u [ 205a4] l2tunnelId:%u [ 205b7] HX*********** Config Port ************** [ 205f8] configMaskOffset = %d [ 20610] LAA = [ 20618] %0.2x: [ 20620] %0.2x [ 20628] L7_SYSMAC_LAA [ 20638] addrType = %s [ 20648] ifAlias = %s [ 20658] L7_SYSNAME [ 20664] nameType = %s [ 20674] ifSpeed = L7_PORTCTRL_PORTSPEED_FULL_10T [ 206a0] ifSpeed = L7_PORTCTRL_PORTSPEED_HALF_100TX [ 206d0] ifSpeed = L7_PORTCTRL_PORTSPEED_AUTO_NEG [ 206fc] ENABLED [ 20704] DISABLED [ 20710] negoCapabilities = %s [ 20728] mgmtAdminState = %s [ 20740] adminState = %s [ 20754] trapState = %s [ 20764] MTU = %d [ 20770] Encapsulation type = %d [ 2078c] Ptr to this nimCfgPort_t = 0x%0.8x [ 207b0] ENABLE [ 207b8] ifSpeed = L7_PORTCTRL_PORTSPEED_FULL_100TX [ 207e8] ifSpeed = L7_PORTCTRL_PORTSPEED_HALF_10T [ 20814] ifSpeed = L7_PORTCTRL_PORTSPEED_FULL_10GSX [ 20844] ifSpeed = L7_PORTCTRL_PORTSPEED_FULL_100FX [ 20874] ifSpeed = L7_PORTCTRL_PORTSPEED_FULL_1000SX [ 208a4] ifSpeed = L7_PORTCTRL_PORTSPEED_AAL5_155 [ 208d0] ifSpeed = L7_PORTCTRL_PORTSPEED_LAG [ 208f8] L7_ALIASNAME [ 20908] L7_SYSMAC_BIA [ 20918] usp = %d.%d.%d [ 20928] Present = %d [ 20938] intfNo = %d [ 20948] runTimeMaskId = %d [ 20960] sysIntfType = %s [ 20974] ifIndex = %d [ 20984] ifDescr = %s [ 20994] ifType = L7_IANA_ETHERNET [ 209b0] ifType = UNKNOWN [ 209c4] BIA = [ 209cc] resetTime = %d [ 209dc] linkChangeTime = %d [ 209f4] ifName = %s [ 20a04] USP = %d.%d.%d [ 20a14] PHY CAP = [ 20a20] L7_PHY_CAP_PORTSPEED_HALF_10 | [ 20a44] L7_PHY_CAP_PORTSPEED_FULL_10 | [ 20a68] L7_PHY_CAP_PORTSPEED_HALF_100 | [ 20a8c] L7_PHY_CAP_PORTSPEED_FULL_100 | [ 20ab0] L7_PHY_CAP_PORTSPEED_HALF_1000 | [ 20ad4] L7_PHY_CAP_PORTSPEED_FULL_1000 | [ 20af8] L7_PHY_CAP_PORTSPEED_FULL_10G | [ 20b1c] L7_PHY_CAP_PORTSPEED_SFP [ 20b38] L7_PHY_CAP_POE_PSE [ 20b50] L7_PHY_CAP_POE_PD [ 20b68] connectorType = L7_RJ45 [ 20b84] connectorType = L7_CONNECTOR_NONE [ 20ba8] connectorType = L7_MTRJ [ 20bc4] connectorType = L7_SCDUP [ 20be0] connectorType = UNKNOWN [ 20bfc] maxFrameSize = %d [ 20c10] Intf State = L7_INTF_UNINITIALIZED [ 20c34] Ptr for the nimIntf_t = 0x%0.8x [ 20c58] Intf State = L7_INTF_CREATING [ 20c78] Intf State = L7_INTF_CREATED [ 20c98] Intf State = L7_INTF_ATTACHING [ 20cb8] Intf State = L7_INTF_ATTACHED [ 20cd8] Intf State = L7_INTF_DETACHING [ 20cf8] Intf State = L7_INTF_DELETING [ 20d18] Intf State = Unknown [ 20d30] L7_PHY_CAP_PORTSPEED_AUTO_NEG | [ 20d54] ifType = L7_IANA_OTHER [ 20d70] ifType = L7_IANA_AAL5 [ 20d88] ifType = L7_IANA_FAST_ETHERNET [ 20dac] ifType = L7_IANA_PROP_VIRTUAL [ 20dcc] ifType = L7_IANA_SOFTWARE_LOOPBACK [ 20df4] ifType = L7_IANA_TUNNEL [ 20e10] ifType = L7_IANA_GIGABIT_ETHERNET [ 20e34] ifType = L7_IANA_LAG_DESC [ 20e50] ifType = L7_IANA_CAPWAP_TUNNEL [ 20e74] ifType = L7_IANA_LOGICAL_DESC [ 20e94] ifType = L7_IANA_L2_VLAN [ 20eb0] ifType = L7_IANA_FAST_ETHERNET_FX [ 20ed7] \̀؀Driver believes link is %s [ 20f0c] up [ 20f10] L7_ATTACH [ 20f1c] L7_DETACH [ 20f28] Error in the call to generate event [ 20f50] L7_DELETE [ 20f5c] NExt is %d [ 20f68] %d.%d.%d exists as %d [ 20f80] Next On slot %d.%d.%d exists as %d [ 20fa4] Nothing left on slot after %d.%d.%d exists as %d [ 20fd8] Next On unit %d.%d.%d exists as %d [ 20ffc] Nothing left on unit after %d.%d.%d exists as %d [ 21030] The used nimCfgPort_t elements of the config file [ 21064] Built test config data [ 2107c] TestAlias [ 21088] Total number of interfaces supported = %d [ 210b4] Total number of interfaces created = %d [ 210e1] ----------------------------------------------- [ 21114] Total number of NIM indices = %d [ 21139] intIf USP ifType ifName [ 2116d] Num [ 211a0] %d [ 211a9] %d/%d/%d [ 211b5] %s [ 211bd] %s [ 211c0] %s 0x%.8x [ 211cc] ../../../../src/system_support/base/infrastructure/nim/nim_events.c [ 21210] NIM: Timeout event(%d), intIfNum(%d) remainingMask = %s [ 2124c] NIM: Error deleting the event correlator(%d) [ 2127c] NIM: Failed to send PORT EVENT on NIM_QUEUE [ 212ac] IfIndex: %d [ 212b8] NIM: Timeout Cmgr event occured for handle(%d) [ 212e8] NIM: Failed Cmgr event notify for handle(%d) [ 21318] NIM: Timeout DTL event occured for handle(%d) [ 21348] NIM: Failed DTL event notify for handle(%d) [ 21378] NIM registrar_ID %ud greater then NIM_USER_LAST [ 213ac] NIM: nimCtlBlk_g uninitialized [ 213cc] NIM: nimNotifyList not initialized [ 213f0] NIM: Failed to find interface at unit %d slot %d port %hu for event(%d) [ 2143c] NIM: Failed to send CMGR PORT EVENT on NIM_QUEUE [ 21470] NIM: event(%d),intf(%d),component(%d), in wrong phase [ 214a8] NIM: event(%d),intf(%d),component(%d), on non-existent intf [ 214e8] NIM: L7_ATTACH out of order for intIfNum(%d) unit %d slot %d port %hu [ 21530] NIM: Failed to ATTACH unit %d slot %d port %hu [ 21560] NIM: Interface %d is Link Down [ 21580] NIM: Interface %d is Link Up [ 215a0] NIM: L7_DELETE out of order for intIfNum(%d) unit %d slot %d port %hu [ 215e8] NIM: L7_DETACH out of order for intIfNum(%d) unit %d slot %d port %hu [ 21643] P|ԀT$TLL`NIM: Task failed to int [ 216ec] NIM: Failed to notify users of interface change [ 21720] nimTask(): invalid message type:%d. %s:%d [ 2174c] NIM: Error in the tally routine [ 21770] failed to put status on queue [ 21790] NIM: Event(%d) out of range in nimEventIntfNotify [ 217c4] NIM: failed to send message to NIM message Queue. [ 217f8] NIM: Failed to get a correlator in nimNotify [ 21828] NIM: Component(%d) out of range in nimEventIntfNotify [ 21860] NIM: failed to create the event semaphore [ 2188c] NIM: unable to alloc memory for correlator table. [ 218c0] NIM EVENT RESPONSE QUEUE [ 218dc] NIM: unable to create the status quueue. [ 21908] NIM: Unexpected status callback on correlator(%d), event(%d), intIf(%d) [ 21954] NIM: Component(%d) failed on event(%d) for intIfNum(%d) [ 21990] NIM: Failed event(%d), intIfNum(%d) [ 219cb] ЀTЀЀЀLjɔȀȀ<ȀtȀȀȀʬNIM: Null data in call to nimIntfCreate [ 21a3c] NIM: Interface already created, %d.%d.%d [ 21a68] NIM: Failed to create the internal interface number [ 21aa0] NIM: Failed to set the mapping of USP to intIfNum fast lookup [ 21ae0] NIM: Failed to set the config for interface [ 21b10] NIM: Failed to notify the components of L7_CREATE event [ 21b4c] NIM: Create error for Physical Interface [ 21b78] NIM: Failed to set intf state to L7_INTF_CREATING [ 21bac] %s%d [ 21bb4] Port # [ 21bbc] Invalid Interface Type in create request [ 21be8] NIM: Number of interface of type(%d) exceeded during create [ 21c28] NIM: Unknown interface type in nimIntfCreate [ 21c7b] 0DXNIM: Unknown interface type [ 21ca4] %s %s %d %s %d [ 21cb4] CPU Interface for [ 21cc8] Slot: [ 21cd0] Port: [ 21cd8] %s %d/%d [ 21ce4] CPU Interface: [ 21cf4] NIM: Attempted event (%d), on USP %d.%d.%hu before phase 3 [ 21d30] NIM: attempted event (%d) with invalid USP, %d.%d.%hu [ 21d68] NIM: BAD event for my test [ 21d84] Success in create [ 21d98] Failed in create [ 21dac] NIM: unable to retrieve the MAC address for %d.%d.%d [ 21de4] %s %d %s %d %s %d [ 21df8] CPU Interface for Unit: [ 21e14] %s %d/%d/%d [ 21e20] %s %d %s %d [ 21e2c] %d/%d [ 21e34] %s %s [ 21e3c] 10/100 Copper - Level [ 21e54] Unit: [ 21e5c] %d/%d/%d [ 21e68] Gigabit - Level [ 21e78] 10G - Level [ 21e84] NIM: Failed to send LINK UP on queue [ 21eac] Components: [ 21ebc] %d, [ 21ec0] ../../../../src/system_support/base/infrastructure/nim/nim_ifindex.c [ 21f08] NIM: ifIndex not added to the AVL tree [ 21f30] NIM: Attempted dereferencing of NULL [ 21f67] `߼`߼߼߼߼߼NIM: ifIndex %d not found, cannot delete it [ 21fb4] NIM: Unable to allocate resources [ 21fd8] NIM: unable to create the ifIndex Sema [ 22000] ../../../../src/system_support/base/infrastructure/nim/nim_intf_api.c [ 22048] NIM: incorrect phase %d for operation [ 22070] NIM: incorrect phase for operation [ 22094] adminState %ud is not valid [ 220b4] NIM: locally administered address is not valid [ 220e4] NIM: addrtype %ud is not valid [ 22104] NIM: trapState %ud is not valid [ 22128] NIM: nameType %ud is not valid [ 22149] nimClearCounters: failed to notify interface %u stats reset event [ 2218c] NIM: Invalid data passed to nimIntfQueury [ 221b8] NIM: Auto-negotiation does not apply to non-physical interfaces. [ 221fc] NIM: Failed to get the interface type. [ 22224] NIM: Failed to set the auto-negotiation for interface %d. [ 22260] Unknown Port Event [ 22274] L7_PORT_DISABLE [ 22284] L7_PORT_ENABLE [ 22294] L7_PORT_INSERT [ 222a4] L7_DOWN [ 222ac] L7_UP [ 222b4] L7_INACTIVE [ 222c0] L7_ACTIVE [ 222cc] L7_FORWARDING [ 222dc] L7_NOT_FORWARDING [ 222f0] L7_CREATE [ 222fc] L7_CREATE_COMPLETE [ 22310] L7_DELETE_PENDING [ 22324] L7_DELETE [ 22330] L7_DELETE_COMPLETE [ 22344] L7_LAG_ACQUIRE [ 22354] L7_LAG_RELEASE [ 22364] L7_SPEED_CHANGE [ 22374] L7_LAG_CFG_CREATE [ 22388] L7_LAG_CFG_MEMBER_CHANGE [ 223a4] L7_LAG_CFG_REMOVE [ 223b8] L7_LAG_CFG_END [ 223c8] L7_PROBE_SETUP [ 223d8] L7_PROBE_TEARDOWN [ 223ec] L7_SET_INTF_SPEED [ 22400] L7_SET_MTU_SIZE [ 22410] L7_PORT_ROUTING_ENABLED [ 22428] L7_PORT_ROUTING_DISABLED [ 22444] L7_PORT_BRIDGING_ENABLED [ 22460] L7_PORT_BRIDGING_DISABLED [ 2247c] L7_VRRP_TO_MASTER [ 22490] L7_VRRP_FROM_MASTER [ 224a4] L7_DOT1X_PORT_AUTHORIZED [ 224c0] L7_DOT1X_PORT_UNAUTHORIZED [ 224dc] L7_ATTACH [ 224e8] L7_ATTACH_COMPLETE [ 224fc] L7_DETACH [ 22508] L7_DETACH_COMPLETE [ 2251c] L7_DOT1X_ACQUIRE [ 22530] L7_DOT1X_RELEASE [ 2254b] $0<HT`lx̀؀    , 8 D P \ h t       Ȁ Ԁ ../../../../src/system_support/base/infrastructure/nim/nim_intf_map_api.c [ 2262c] NIM: incorrect phase for operation [ 22650] nimCheckIfNumber: incorrect phase for operation [ 22684] nimCheckIfNumber: internal interface number %d out of range [ 226c4] nimGetUnitSlotPort: incorrect phase for operation [ 226f8] NIM: out of bounds usp used U=%d, S=%d P=%d [ 22728] NIM: out of bounds usp used U=%d, S=%d P=%d - port too large [ 22768] NIM: usp is NULL [ 2277c] NIM: unit/slot out of bounds [ 2279c] NIM: NULL usp ptr [ 227b2] 34342Ԁ444t444Ā8877|877997777798Ѐ77777:777777777;$;\ Only vlan interfaces supported at this time [ 22890] ../../../../src/system_support/base/infrastructure/nim/nim_outcalls.c [ 228d8] NIM [ 228dc] ../../../../src/system_support/base/infrastructure/nim/nim_trace.c [ 22920] NIM: unable to create the trace buffer [ 22948] NIM: unable to delete the trace buffer [ 22970] NA [ 22974] Task %x, [ 22980] %s, [ 22988] If %d, [ 22990] Id %d, [ 22998] Start [ 229a0] Fini [ 229a8] %s [ 229ac] Event out of order, [ 229c4] Event in wrong phase, [ 229dc] Event on non-existent intf, [ 229fc] @@@@@@, [ 22a08] Comp %d, [ 22a14] Event %d, [ 22a20] Intf %d, [ 22a2c] Event with invalid usp, [ 22a4c] NIM_EVENT> [ 22a58] %4lu: [ 22a60] %-15s: [ 22a68] ts=%8.8u [ 22a74] *** ERROR (cannot format this entry) *** [ 22aa0] NIM_EVENTPCOMP> [ 22ab0] NIMERR> [ 22ab8] @@@@@@ [ 22ac0] %2.2x [ 22ac8] - [ 22ace] Could not locate NIM trace block for handle 0x%8.8x [ 22b06] IHIHJJJK̀K̀LlLlLxnimTraceModeApply: Unable to apply NIM trace mode (%u), handle=0x%8.8x [ 22b74] enabled [ 22b7c] disabled [ 22b88] Tracing is %s [ 22b98] %-30s = 0x%0.8x [ 22bac] Trace Mask [ 22bb8] %-30s = %d [ 22bc4] Number of events [ 22bd8] %-30s - sets what gets traced [ 22bf8] nimTraceMaskSet(mask) [ 22c10] NIM_TRACE_PORT_EVENTS [ 22c2c] NIM_TRACE_PORT_EVENTS_PER_COMPONENT [ 22c54] NIM_TRACE_EVENT_ERROR [ 22c70] %-30s - print stats from NIM [ 22c90] nimTraceStatsPrint() [ 22ca8] %-30s - 1 is enabled, 0 is disabled [ 22cd0] nimTraceModeApply(enable) [ 22cec] %-30s - 0 for all intf, >0 for an intf [ 22d14] nimTraceIntfNumSet() [ 22d2c] osapiMalloc failed at %s : %d [ 22d4c] nimProfileInit [ 22d5c] Profiling is %s [ 22d70] Profile Mask [ 22d80] Profiling of port events per interface is not enabled. [ 22db9] Processing time for event %d(%s) per Interface: [ 22dec] USP Processing time(msec) [ 22e18] ------- -------------------- [ 22e44] *** All interfaces took 0 ms for this event *** [ 22e78] %d/%d/%d %-8u [ 22e94] Profiling of port events per component is not enabled. [ 22ecd] Processing time for event %d(%s) per component: [ 22f00] Component Processing time(msec) [ 22f3c] ------------- --------------------- [ 22f78] *** All components took 0 ms for this event *** [ 22fac] %d-%-20s %-8u [ 22fc9] Event Processing time(msec) [ 23004] -------------- --------------------- [ 23044] %2d-%-20s %8u [ 23060] Nim profiling is disabled [ 2307c] %-30s - Enable port events profiling [ 230a4] nimProfileModeSet(enable) [ 230c0] %-30s - Configure port events profile mask [ 230ec] nimProfileMaskSet(mask) [ 23104] NIM_PROFILE_PORT_EVENT_PER_INTF [ 23128] NIM_PROFILE_PORT_EVENT_PER_COMP [ 2314c] %-30s - Show port events profiling configuration [ 23180] nimProfileConfigShow() [ 23198] nimProfileInfoShowEvent(event,compDetail,intfDetail) [ 231d0] %-30s - Show profiling Information for a particular port event [ 23210] - If event is 0 then information for all the events is displayed [ 23254] - If compDetail is 1 then processing time of the event per component is also displayed [ 232b0] - If intfDetail is 1 then processing time of the event per interface is also displayed [ 2330c] (Unable to format log message) [ 2332c] ../../../../src/system_support/base/infrastructure/nim/nim_util.c [ 23370] NIM: %d.%d.%d not found, cannot delete it [ 2339c] NIM: out of bounds usp used U=%d, S=%d P=%d [ 233cc] NIM: Usp to intIfNum not added for intIfNum %d [ 233fc] NIM: out of bounds usp used U=%d, S=%d P=%d - port too large [ 2343c] NIM: Failed in call to delete usmDbUserStatsCreate for intf(%d) [ 23480] NIM: Failed in call to delete usmDbUserStatsDelete for intf(%d) [ 234c4] NIM: Failed to create Intf stat(%d) on intf(%d) [ 234f8] NIM: Failed to delete Intf stat(%d) on intf(%d) [ 2352c] NIM: Failed to create CPU stat(%d) on intf(%d) [ 2355c] NIM: Failed to delete CPU stat(%d) on intf(%d) [ 2358c] NIM: out of range usp (%d.%d.%d) [ 235b0] NIM: unsupported type of interface L7_STACK_INTF [ 235e4] NIM: out of range usp for CPU Intf (%d.%d.%d) [ 23614] NIM: out of range for LAG interface (%d) [ 23640] NIM: unsupported type of interface (%d) [ 2366c] NIM: out of range vlan interface (%d) [ 23694] NIM: out of range loopback interface (%d) [ 236c0] NIM: out of range tunnel interface (%d) [ 236ec] NIM: out of range wireless network interface (%d) [ 23720] NIM: out of range l2tunnel interface (%d) [ 2374e] jPklmlmm<mmm̀mno@odo$oo$ooЀopp<ppppЀpĀpЀp؀pppqNIM: State set during incorrect CNFGR phase [ 23800] NIM: intIfNum out of range [ 2381c] NIM: incorrect CNFGR phase for action [ 23846] t$tDt\ttttNIM: configId not added to tree for intIfNum %d [ 23894] NIM: configId could not be deleted from tree for intIfNum %d [ 238d4] NIM: Control block or config data not valid [ 23904] Failed to add configId to avl tree for intIfNum %d [ 2393a] xxTxxxTxЀxTyyTyz(z../../../../src/system_support/base/system/base/nvstore.c [ 239a0] nvStore registrar_ID %d already registered [ 239cc] nvStore registrar_ID %d greater then NVSTORE_USER_LAST [ 23a04] nvStore registrar_ID %d not registered [ 23a2c] fastpath.cfg [ 23a3c] bad rc on Save call to registrar_ID %d [ 23a65] %25s (%d) has data changed flag set. [ 23a8d] Component %d has data changed flag set. [ 23ab8] bad rc on config dump call to registrar_ID %d [ 23ae8] bad rc on debug dump call to registrar_ID %d [ 23b18] File %s corrupted from file system. Checksum mismatch. The calculated checksum of a components configuration file in the file system did not match the checksum of the file in memory. [ 23bd4] Building defaults for file %s. A components configuration file does not exist or the files checksum is incorrect so the components default configuration file is built. [ 23c80] Error on call to osapiFsWrite routine on file %s. Either the file can not be opened or the OSs file I/O returned an error trying to write to the file. [ 23d1c] startup-config [ 23d2c] %s: LINE %d: Could not delete file startup-config [ 23d60] nvStoreEraseStartupConfig [ 23d7d] nvStoreDebugResetDataRegistrationCheck [ 23da8] CompID %d Comp %s has not registerd a resetDataChanged function. [ 23dec] ../../../../src/system_support/base/system/base/registry.c [ 23e28] sysapiRegistryPut failed [ 23e47] `p|ĀĀ0T\Ether Lag Entry Unconfiguration Failed [ 23eb4] Ether Stat Entry Unconfiguration Failed [ 23ee0] History Control Entry Unconfiguration Failed [ 23f10] Polling For Alarm Cannot be Started [ 23f38] Event Entry Default Creation Failed [ 23f60] ../../../../src/application/base/rmon/rmon_cnfgr.c [ 23f9b] |Ԁ||Ether Lag Entry Default Creation Failed [ 23fd4] Ether Stat Entry Default Creation Failed [ 24000] History Control Entry Default Creation Failed [ 24030] RMONTask [ 2403c] Failed to Create RMON Task. [ 2405c] alarmEvent [ 24068] public [ 24070] monitorEvent [ 24080] monitorHistoryControl [ 24098] A [ 240a0] @0 [ 240a8] ?陙../../../../src/application/base/rmon/rmon_index.c [ 240e4] alarmTab= %d, eventTab = %d [ 24104] rmonMapInsert, snmp_index = %d, rc = %d [ 24130] rmonBinarySearch, 100, pos = %d, rc = %d [ 2415c] rmonBinarySearch, 200, pos = %d, rc = %d [ 24188] rmonBinarySearch, 300, pos = %d, rc = %d [ 241b4] rmonBinarySearch, 400, pos = %d, rc = %d [ 241e0] rmonBinarySearch, 500, pos = %d, rc = %d [ 2420c] rmonBinarySearch, 600, pos = %d, rc = %d [ 24238] rmonBinarySearch, 800, pos = %d, rc = %d [ 24264] rmonMapRemove, snmp_index = %d, rc = %d [ 24290] rmonMapInsert, snmp_index = %d, array_index = %d, rc = %d [ 242cc] rmonMapLowestGet, snmp_index = %d, rc = %d [ 242f8] rmonNextGet, snmp_index = %d, next_snmp_index = %d, rc = %d [ 24338] monitorEtherStats [ 24367] @x넀됀똀뤀밀뼀 @ [ 24397] LX섀케ȀԀ [ 243cb] 0p$Ll0؀ [ 243fb] |ff@Ԁ(@<Ppdtl [ 24430] %s%d [ 24438] ../../../../src/system_support/base/infrastructure/sim/sim.c [ 24478] Error: SIM - could not add management MAC. [ 244a4] Error: SIM - could not delete management MAC. [ 244d4] simAddrChangeEventNotify: Failed to notif registrar_ID %d addrType %d addrFamily %d [ 24528] simAddrChangeEventRegister: Invalid address type [ 2455c] simAddrChangeEventRegister: Invalid address family [ 24590] simAddrChangeEventRegister: Invalid registrat ID %d [ 245c4] Unable to set the locator led [ 245e4] Unable to get the locator led [ 24604] ECHO_REQUEST [ 24614] ECHO_REPLY [ 24620] ../../../../src/system_support/base/infrastructure/sim/sim_debug.c [ 24664] Pkt RX - Intf: %d/%d/%d(%d), SRC_IP:%s, DEST_IP:%s, Type:%s [ 246a0] Pkt TX - Intf: %d/%d/%d(%d), SRC_IP:%s, DEST_IP:%s, Type:%s [ 246dc] sim_debug.cfg [ 246ec] Mode '%d' - Invalid value for mode !!! Enter 1 (for NONE) or 3 (for DHCP) [ 24738] DHCP [ 24740] Setting config mode to '%s' ... [ 24764] NONE [ 2476c] simCfgData.cfg [ 2477c] ../../../../src/system_support/base/infrastructure/sim/sim_util.c [ 247c0] Error on call to sysapiCfgFileWrite routine on config file %s [ 24800] TransferTask [ 24810] Failed to Create Transfer Task. [ 24834] System Name - %s [ 24848] System Location - %s [ 24860] System systemContact - %s [ 2487c] Service Port IP - %s [ 24894] Service Port NetMask - %s [ 248b0] Service Port Gateway - %s [ 248cc] System IP - %s [ 248dc] System NetMask - %s [ 248f4] System Gateway - %s [ 2490c] %02X:%02X:%02X:%02X:%02X:%02X [ 2492c] System Burned-in MAC Address - %s [ 24950] System Locally Administered MAC Address - %s [ 24980] %s [ 24984] System MAC Type - %s [ 2499c] Network Protocol - %s [ 249b4] Network Port IPv6 Protocol - %s [ 249d8] Network Port IPv6 AutoConfig Mode - %s [ 24a00] DISABLED [ 24a0c] Network IPv6 Admin Mode - %s [ 24a2c] eui [ 24a30] Network IPv6 Prefix - %s/%d %s [ 24a50] Network IPv6 Gateway - %s [ 24a6c] Service Port Protocol - %s [ 24a88] Service Port IPv6 Protocol - %s [ 24aac] Service Port IPv6 AutoConfig Mode - %s [ 24ad4] Service Port IPv6 Admin Mode - %s [ 24af8] Service Port IPv6 Prefix - %s/%d %s [ 24b20] Service Port IPv6 Gateway - %s [ 24b40] System Baud Rate - %s [ 24b58] L7_BAUDRATE_1200 [ 24b6c] Serial Port Timeout - %d [ 24b88] Serial Port Stop Bits - %s [ 24ba4] Serial Port Parity Type - %s [ 24bc4] Serial Port Flow Control Mode - %s [ 24be8] Serial Port Char Size - %d [ 24c04] L7_TRANSFER_ZMODEM [ 24c18] System Transfer Mode - %s [ 24c34] System Transfer Server IP - %s [ 24c54] System Transfer File Path - %s [ 24c74] System Transfer File Name - %s [ 24c94] System Upload File Type - %s [ 24cb4] L7_FILE_TYPE_CODE [ 24cc8] System Download File Type - %s [ 24ce8] Transfer Status - %d [ 24d00] Suspend Mgmt Access - %d [ 24d1c] System Unit ID - %d [ 24d34] System VLAN ID - %d [ 24d4c] Management Port- %d [ 24d64] Scaling Constants [ 24d78] ----------------- [ 24d8c] L7_SYS_SIZE - %d [ 24da0] L7_MAX_FILENAME - %d [ 24db8] L7_MAC_ADDR_LEN - %d [ 24dd0] TIMEZONE --------------- [ 24df2] TimeZoneName :%s [ 24e06] hours :%u [ 24e16] minutes :%u [ 24e24] SUMMERTIME --------------- [ 24e46] mode :%u [ 24e52] persistMode :%u [ 24e66] stTimeInSeconds :%u [ 24e7e] endTimeInSeconds :%u [ 24e96] -- recurring -- [ 24eae] start_month :%u [ 24ec2] start_date :%u [ 24ed6] start_year :%u [ 24eea] start_time :%u [ 24efe] end_month :%u [ 24f12] end_date :%u [ 24f22] end_year :%u [ 24f32] end_time :%u [ 24f42] offset_minutes :%u [ 24f5a] zone :%s [ 24f66] -- non-recurring -- [ 24f82] start_week :%u [ 24f96] start_day :%u [ 24faa] start_month:%u [ 24fbe] end_week :%u [ 24fce] end_day :%u [ 24fde] end_month:%u [ 24fec] L7_FILE_TYPE_CONFIG [ 25000] L7_FILE_TYPE_TXTCFG [ 25014] L7_FILE_TYPE_ERRORLOG [ 2502c] L7_FILE_TYPE_SYSTEM_LOG [ 25044] L7_FILE_TYPE_TRAP_LOG [ 2505c] L7_FILE_TYPE_TRACE_DUMP [ 25074] L7_FILE_TYPE_AUTO_INSTALL_SCRIPT [ 25098] L7_TRANSFER_YMODEM [ 250ac] L7_TRANSFER_XMODEM [ 250c0] L7_TRANSFER_TFTP [ 250d4] L7_ENABLE [ 250e0] L7_DISABLE [ 250ec] L7_PARITY_NONE [ 250fc] L7_PARITY_EVEN [ 2510c] L7_PARITY_ODD [ 2511c] L7_STOP_BIT_2 [ 2512c] L7_STOP_BIT_1 [ 2513c] L7_BAUDRATE_2400 [ 25150] L7_BAUDRATE_4800 [ 25164] L7_BAUDRATE_9600 [ 25178] L7_BAUDRATE_19200 [ 2518c] L7_BAUDRATE_38400 [ 251a0] L7_BAUDRATE_57600 [ 251b4] L7_BAUDRATE_115200 [ 251cc] ENABLED [ 251d4] Enabled [ 251dc] Disabled [ 251e8] L7_SYSCONFIG_MODE_DHCP [ 25200] L7_SYSCONFIG_MODE_NONE [ 25218] L7_SYSCONFIG_MODE_BOOTP [ 25230] L7_SYSMAC_LAA [ 25240] L7_SYSMAC_BIA [ 25253] |̀0\8L`|tԀ$ TIMEZONE --------------- [ 25326] hours :%d [ 25336] SUMMERTIME --------------- [ 2535c] %s%d [ 25364] dtl [ 25368] Error on call to sysapiRegistryGet routine with key SYS_MAC [ 253aa] #`#####simCnfgrInitPhase1Process: Error could not create ip stats [ 253fc] TEST_NAME [ 25408] TEST_PLACE [ 25414] TEST_CONTACT [ 25424] /tmp/tftp [ 25430] /transferFile [ 25440] Built test config data [ 25458] pFileHdr->filename : %s [ 25474] pFileHdr->version : %u [ 25490] pFileHdr->componentID : %u [ 254ac] pFileHdr->type : %u [ 254c8] pFileHdr->length : %u [ 254e4] pFileHdr->dataChanged : %u [ 25500] pFileHdr->savePointId : %u [ 2551c] pFileHdr->targetDevice: %u [ 25538] pFileHdr->pad[i] : %u [ 25554] simCfgData.checkSum : %u [ 25570] INIT 0 [ 25578] INIT 1 [ 25580] INIT 2 [ 25588] WMU [ 2558c] INIT 3 [ 25594] EXECUTE [ 2559c] UNCONFIG 1 [ 255a8] UNCONFIG 2 [ 255b4] sntp.cfg [ 255c0] Error on call to sysapiCfgFileWrite routine on config file %s [ 25600] ../../../../src/system_support/base/network/sntp/sntp_cfg.c [ 2563c] SNTP configuration state set to %s [ 25660] sntpCnfgrInitPhase2Process: Could not register with nvStore [ 256a0] %s: %d: sntpCnfgrInitPhase3Process: SNTP Cfg unable to read config file [ 256fa] /0 0X0p0psntpCfgTask: Bad status on receive message from cfg queue %08x [ 2574c] %s: %d: sntpCfgTaskCreate: Error allocating CFG data [ 25784] SNTPQ [ 2578c] sntpCfgTaskCreate: Error starting SNTP Client [ 257bc] sntpCfgTaskCreate: SNTP unable to create message queue [ 257f4] SNTPC [ 257fc] sntpCfgTaskCreate: Unable to syncronize with SNTP Cfg processing task [ 25844] sntpCfgTaskCreate: Unable to create SNTP processing task [ 25880] = [ 25888] @p [ 25890] delay=%f [ 2589c] dispersion=%f [ 258ac] reference=%f [ 258bc] originate=%f [ 258cc] receive=%f [ 258dc] transmit=%f [ 258ec] current=%f [ 258fc] referenceId=%d [ 25910] precision=%x [ 25920] poll=%d [ 2592c] stratum=%d [ 2593c] mode=%x [ 25948] version=%x [ 25958] li=%x [ 25960] SNTP Packet: [ 25970] @p [ 25978] > [ 25980] = [ 25988] A7 [ 25990] @ [ 25998] ? [ 259a0] @0 [ 259a8] sntpRTTCalculate: unicast mode - delay %g offset %g [ 259e0] sntpRTTCalculate: broadcast/multicast mode - delay %g offset %g [ 25a28] ? [ 25a30] 224.0.1.1 [ 25a3c] socket close - socket %d [ 25a58] socket open failed - errno %d [ 25a78] SNTP: Inconsistent mode [ 25a94] Can't bind socket to local address 0x%lx port %d - errno %d [ 25ad4] ../../../../src/system_support/base/network/sntp/sntp_client.c [ 25b14] sntpLocalSocketOpen: osapiSetsockopt SO_BROADCAST on failed [ 25b50] SNTP: Can't join multicast group - errno %d [ 25b80] sntpLocalSocketOpen: osapiSetsockopt SO_BROADCAST off failed [ 25bc0] socket open - socket %d [ 25bdc] sntpFlushReceiveBuffer: flush %d rc(%d) [ 25c08] sntpFlushReceiveBuffer: flushed %d messages. Possible attack in progress! [ 25c54] unicastServerSelect: priority - %d [ 25c78] sntpServerSelect: no server selected [ 25ca0] sntpServerSelect: selected server %s with priority %d at index %d [ 25ce4] unicastServerSelect: server count - %d [ 25d0c] sntpPollSend: send failed - errno %d [ 25d34] Send failed - errno %d [ 25d4c] SNTP: system clock synchronized on %s UTC. Indicates that SNTP has successfully synchronized the time of the box with the server. [ 25dd0] SNTP: osapiUTCTimeNow = %d -> %s [ 25df4] SNTP: Could not update system time [ 25e18] SNTP: Adjusting clock: peerUpdate=%f, offset=%f [ 25e4c] SNTP: discarding unauthenticated packet from %s [ 25e7c] SNTP: authentication failed for packet from %s, keyid = %i [ 25eb8] NTP Bits: 0x%.08x [ 25ecc] NTP Ref: %c%c%c%c [ 25ee0] NTP Srv: %d.%d.%d.%d [ 25ef8] @ [ 25f00] @0 [ 25f08] sntpTask: wait for valid configuration [ 25f30] sntpTask: valid configuration - mode %d [ 25f5c] sntpTask: Could not open socket [ 25f80] sntpTask: select server %d [ 25f9c] sntpTask: enter poll loop - mode %d [ 25fc4] sntpTask: starting wait interval %d [ 25fec] sntpTask: select returned %d [ 2600c] sntpTask: waiting for NTP packet - timeout value %d - retry count %d - fd %d [ 2605c] sntpTask:Select timed out - errno %d - last attempt status %d - retry count %d [ 260ac] sntpTask: Select indicates data available [ 260d8] sntpTask:recv failed - errno %d - last attempt status %d - retry count %d [ 26124] sntpTask: osapiRecvFrom returns no data - errno %d last attempt status %d - retry count %d [ 26180] sntpTask: osapiRecvFrom returns data [ 261a8] Process response from 0x%lx len %d [ 261cc] sntpTask: packet processed - last attempt status %d - retry count %d [ 26214] sntpTask: invalid sender - last attempt status %d - retry count %d [ 26258] sntpTask: packet process failed - last attempt status %d - retry count %d [ 262a4] sntpTask: Select failed for poll - errno %d last attempt status %d - retry count %d [ 262fc] sntpTask: unicast poll sent [ 2631c] sntpTask: select returned %d - flushing receive buffers [ 26358] sntpTask: flushed receive buffer - elapsed time %d [ 2638c] sntpTask: poll interval not complete - %d [ 263b8] Select failed during interval - errno %d [ 263e4] sntpTask: open socket [ 263fc] SNTP: Unable to create the task semaphore [ 26428] SNTP [ 26430] SNTP: Unable to initialize sntp task [ 26458] SNTP: Unable to obtain configuration data [ 26484] Unicast [ 2648c] Disabled [ 26498] Broadcast [ 264a4] Multicast [ 264b0] Unknown [ 264b8] Reserved [ 264c4] Symmetric Active [ 264d8] Symmetric Passive [ 264ec] Client [ 264f4] Server [ 264fc] Control [ 26504] Private [ 2650e] xxxxĀxЀx܀xx - SNTP Status - [ 26540] Client Mode: %d %s [ 26554] Unicast Port: %d [ 26568] Unicast Poll Interval: %d [ 26584] Unicast Poll Retry: %d [ 2659c] Unicast Poll Timeout: %d [ 265b8] Broadcast Poll Interval: %d [ 265d8] Multicast Poll Interval: %d [ 265f8] UnicastServerCount: %d [ 26610] Active Server Index: %d [ 2662d] server[%d] status: %d [ 26645] server[%d] address: %s [ 26660] Last update time: %d [ 26678] Last attempt time: %d [ 26690] Last attempt status: %d [ 266ac] Server IP address: not set [ 266c8] Server IP address: %s [ 266e0] Server IP address type: %d [ 266fc] Server stratum: %d [ 26710] Server version: %d [ 26724] Server ref clock id: 0x%x %s [ 26744] Server mode: %d - %s [ 2675c] Broadcast count: %d [ 26774] Multicast count: %d [ 2678c] Enabled [ 26795] Authenticate Mode: %s [ 267ad] key[%d] status: %d [ 267c5] key[%d] id: %d [ 267d9] key[%d] value: %s [ 267ec] Yes [ 267f0] No [ 267f5] key[%d] trusted: %s [ 2680d] server[%d] address type: %d [ 2682d] server[%d] port: %d [ 26845] server[%d] priority: %d [ 26861] server[%d] poll: %d [ 26879] server[%d] version: %d [ 26895] server[%d] last attempt status: %d [ 268bd] server[%d] last attempt time: %d [ 268e1] server[%d] last update time: %d [ 26905] server[%d] num requests: %d [ 26925] server[%d] num failed requests: %d [ 2694c] 192.168.21.51 [ 2695c] 192.168.21.50 [ 2696c] 198.82.162.213 [ 2697c] sntp unit test 2-a failed on server add [ 269a8] sntp unit test 2-b failed on server status [ 269d4] sntp unit test 2-c failed on priority set [ 26a00] sntp unit test 2-d failed on priority retrieve [ 26a30] sntp unit test 2-e failed on version set [ 26a5c] sntp unit test 2-f failed on priority retrieve [ 26a8c] 192.168.21.220 [ 26a9c] sntp unit test 2-g failed on server add [ 26ac8] sntp unit test 2-h failed on priority set [ 26af4] 192.168.21.221 [ 26b04] sntp unit test 2-i failed on server add [ 26b30] sntp unit test 2-j failed on server count [ 26b5c] 10.0.0.22 [ 26b68] sntp unit test 2-k improperly succeeded on server add [ 26ba0] sntp unit test 2-l failed on priority set [ 26bcc] sntp unit test 2-m failed on priority retrieve [ 26bfc] sntp unit test 2-n failed on mode set [ 26c24] sntp unit test 2-n failed on mode retrieve [ 26c50] 10.0.0.5 [ 26c5c] 10.0.0.7 [ 26c68] sntp unit test 3-b failed on server delete [ 26c94] sntp unit test 3-c failed on server delete [ 26cc0] sntp unit test 4-a failed on server count default [ 26cf4] sntp unit test 4-b failed on broadcast poll interval [ 26d2c] sntp unit test 4-c failed on client mode [ 26d58] sntp unit test 4-d failed on client port [ 26d84] sntp unit test 4-e failed on unicast poll interval [ 26db8] sntp unit test 4-f failed on unicast poll timeout [ 26dec] sntp unit test 4-g failed on unicast poll retry [ 26e20] sntp unit test 4-h failed on unicast poll retry [ 26e54] sntp unit test 4-i failed on unicast poll retry [ 26e88] sntp unit test 4-j failed on server status for server %d [ 26ec4] Current time: %s [ 26ed8] ../../../../src/system_support/base/services/cstats/statsapi.c [ 26f18] error! malloc pStatsCfg [ 26f34] Error!! pStatsParmList is NULL [ 26f54] error!! pCounterValueList is NULL [ 26f78] error!! PCounterValueList is NULL [ 26f9c] error!! pCounterValueList is NULL [ 26fc0] error!! pStatsParmList is NULL [ 26fe0] ../../../../src/system_support/base/services/cstats/statsconfig.c [ 27024] error!! pStatsCfg->pCollector is NULL [ 2704c] error!! pStatsCfg->pPresenter is NULL [ 27077] <D../../../../src/application/base/policy/std_policy_cnfgr.c [ 270c4] Failed nim registration for Interface Change Callback [ 270fc] policy.cfg [ 27108] ../../../../src/system_support/base/l7util/trace/sys_trace.c [ 27148] traceBlockDelete(): Unable to delete trace block semaphore, id=0x%8.8x [ 27195] +--------------------------------------------------------+ [ 271d5] Trace Name : %-16s [ 271f1] | Head : 0x%8.8lx Active : %-6u | [ 2722d] | Tail : 0x%8.8lx Entry Size : %-6u | [ 27269] | Next : 0x%8.8lx Buffer Size : %-8lu | [ 272a1] | Entry Count : %-10lu Max Entries : %-6u | [ 272d9] +--------------------------------------------------------+ [ 27318] %02x [ 27320] Trace not found with traceId = %u [ 27344] osapiMalloc failed at %s : %d [ 27364] sysTraceProfileMgrInit [ 2737c] System tracing mode is %d [ 27398] sysTraceModeSet(mode) [ 273b0] %-15s - Set system trace mode [ 273d4] 0 - disable system tracing [ 273f8] 1 - enable tracing of global events [ 27424] 2 - enable tracing of all events [ 27450] %-30s - print system tracing configuration [ 2747c] sysTraceConfigPrint() [ 27494] %-30s - Display System trace buffer [ 274bc] sysTraceShow [ 274cc] System profiling is disabled [ 274ec] System profiling mode is %d [ 2750c] sysProfileModeSet(mode) [ 27524] %-15s - Set system profile mode [ 27548] 0 - disable system profiling [ 27570] 1 - enable profiling of global events [ 275a0] 2 - enable detailed profiling [ 275c8] %-30s - print system profiling configuration [ 275f8] sysProfileConfigPrint() [ 27610] %-30s - Display System profiling info [ 27638] sysProfileShow [ 27648] Dual Image Manager Initialization failed. [ 27678] %s [ 2767c] Stats initialization failed [ 2769c] %s:%u: sysapiIfNetInit() failed [ 276c0] %s:%u: sysNetPduHooksInit() failed [ 276e4] ../../../../src/system_support/base/system/base/sysapi.c [ 27720] Event Handler Initialization failed. [ 27748] osapiTimer [ 27754] In routine %s line %d, osapiWaitForTaskInit failed [ 27788] sysapiTimerTaskStart [ 277a0] sysapiRegistryPut failed [ 277bc] sysapiRegistryGet failed [ 277d8] osapiMalloc() failed [ 277f4] osapiFsDir() failed [ 27808] [ 2780c] fastpath.cfg [ 2781c] .cfg [ 27824] Failed to separate component config from %s [ 27854] could not separate %s. The configuration file could not be read. This message may occur on a system for which no configuration has ever been saved or for which configuration has been erased. [ 27914] Configuration file validation failed. This file will be deleted. [ 27958] Failed to malloc pSysapiCfgTree[%u] [ 27980] Configuration file size %u is too small. [ 279ac] Version Check Failed [ 279c4] Configuration file on disk size %u is less than expected size %u. [ 27a08] sysapiCfgFilesSeparate: CRC check failed. 0x%x read and 0x%x calculated [ 27a50] fastpathRun.cfg [ 27a60] sysapiCfgFilesSeparate:Invalid configuration file for the target device [ 27aa8] Unrecognized big config file version %d [ 27ad4] Failed to read config file %s header [ 27afc] Configuration file %s size is 0 (zero) bytes. The configuration file could not be read. This message may occur on a system for which no configuration has ever been saved or for which configuration has been erased. [ 27bd4] File %s hdr length = %u is invalid expect %u [ 27c04] File %s hdr name = %s is invalid [ 27c28] Failed to update cfg tree for component %d and file %s [ 27c60] Failed to allocate %u for config file %s [ 27c8c] Building defaults for file %s version %u. Configuration did not exist or could not be read for the specified feature or file. Default configuration values will be used. The file name and version are indicated.. [ 27d64] Error on call to sysapiCfgFileWrite routine on file %s [ 27d9c] Migrating config file %s from version %u to %u. A configuration file version mismatch was detected so a configuration file migration has started. [ 27e30] File %s: same version (%u) but the sizes (%u->%u) differ. The configuration file which was loaded was of a different size than expected for the version number. This message indicates the configuration file needed to be migrated to the version number appropriate for the code image. This message may appear after upgrading the code image to a more current release. [ 27fa0] Failed to uncompress config data for component %d [ 27fd4] File %s corrupted from file system. Checksum mismatch.The calculated checksum of a components configuration file in the file system did not match the checksum of the file in memory. [ 28090] pSysapiCfgTree[%u] is NULL [ 280ac] Failed to uncompress data buffer - rc = %u [ 280d8] Insufficient memory [ 280ec] Insufficient target buffer [ 28108] File corrupt [ 28118] Failed to allocate %ld for config file compression buffer [ 28154] Failed to compress data - rc = %u (%s) [ 2817c] Ignoring the config '%s' [ 28198] Failed to allocate %ld for config file %s [ 281c4] Failed to compress config file for component %d [ 281f8] startup-config [ 28208] TxtCfgDsbld.err [ 28218] running-config [ 28228] TxtRunCfgDsbld.err [ 2823c] backup-fastpath [ 2824c] Configuration file size(%u bytes) is too small! [ 28280] Configuration file failed version check! [ 282ac] Configuration file is not intented for this platform. [ 282e4] Configuration file on disk size(%u bytes) is less than expected size (%u bytes)! [ 28338] Unable to read checksum from configuration file! [ 2836c] CRC check failed in the configuration file! [ 2839c] Failed to read configuration file header! [ 283c8] Configuration file size is 0 (zero) bytes! [ 283f5] Cfg Descr Cfg Descr [ 2845d] Original Compressed Uncompressed [ 284bd] File Size Size CompID Ver Changed Len Len [ 28521] ---- -------- --------- ------ --- ------- --- -------------- [ 28584] %24s %6u %6u [ 285a0] Summation [ 285ac] %24s %6u %6u [ 285c4] %s version: %d [ 285dc] fastpath.cfg [ 285ec] sysapiCfgDescriptor ersion: %d [ 28614] %3u %2u %1u %6u %6u [ 2863c] %s [ 28640] FAIL: sysapiCfgFileDebugConfigDeploy [ 28668] PASS: sysapiCfgFileDebugConfigDeploy [ 28690] bigc [ 28698] pFileHdr->filename : %s [ 286b4] pFileHdr->version : %u [ 286d0] pFileHdr->componentID : %u [ 286ec] pFileHdr->type : %u [ 28708] pFileHdr->length : %u [ 28724] pFileHdr->dataChanged : %u [ 28740] pFileHdr->savePointId : %u [ 2875c] pFileHdr->targetDevice: %u [ 28778] pFileHdr->pad[i] : %u [ 28794] Error: pFileHdr is NULL [ 287b0] hpcDescriptorDbInit: bad return code from sysapiHpcDescriptorDbInit call. [ 287fc] ../../../../src/system_support/base/system/base/sysapi_hpc.c [ 2883c] hpcInit: bad return code from hpcInit call. [ 2886c] sysapiHpcSfpPowerCtrl: Pwr ctrl is not supported [ 288a0] sysapiHpcLedModeCustomization:LED Customization is not supported [ 288e4] slot %d Max Port count %d [ 28900] Free [ 28908] Alloc [ 28910] IPv4 FWD Q [ 2891c] IPv4 FWD [ 28928] ARP RX [ 28930] ARP PEND Q [ 2893c] ARP RES CB [ 28948] PDU TX [ 28950] PDU RX [ 28958] VRRP RX [ 28960] DHCP Relay RX [ 28970] UDP Relay TX [ 28980] CPWIO RX [ 2898c] CPWIO ARP RX [ 2899c] CPWIO TX [ 289a8] DAI [ 289ad] MBUF history already initialized with size of %u entries. [ 289e8] ../../../../src/system_support/base/system/base/sysapi_if_net.c [ 28a29] Failed to allocate mbuf history [ 28a4d] No mbuf history. First call mbufHistoryInit(size). [ 28a81] Time (msec) mbuf Action File Line [ 28acd] %10u %#10x %6s %16s %u [ 28afc] mbufSize %d (0x%x) [ 28b1c] Current Time 0x%x [ 28b38] MbufsFree %d [ 28b50] MbufsRxUsed %d [ 28b68] Total Rx Norm Alloc Attempts %d [ 28b8c] Total Rx Mid2 Alloc Attempts %d [ 28bb0] Total Rx Mid1 Alloc Attempts %d [ 28bd4] Total Rx Mid0 Alloc Attempts %d [ 28bf8] Total Rx High Alloc Attempts %d [ 28c1c] Total Tx Alloc Attempts %d [ 28c40] Total Rx Norm Alloc Failures %d [ 28c64] Total Rx Mid2 Alloc Failures %d [ 28c88] Total Rx Mid1 Alloc Failures %d [ 28cac] Total Rx Mid0 Alloc Failures %d [ 28cd0] Total Rx High Alloc Failures %d [ 28cf4] Total Tx Alloc Failures %d [ 28d18] Mbuf 0x%x at %s alloc by task 0x%x in %s:%u at %u secs [ 28d50] =================== [ 28d68] %04x [ 28d70] %2.2x [ 28d7c] sysapiRegistryGet failed [ 28d98] none [ 28da3] lL΄μ%s%d [ 28dbc] dtl [ 28dc0] ../../../../src/system_support/base/network/sysnet/sysnet_api.c [ 28e00] Unable to create SYSNET PDU Hook semaphore [ 28e2c] ../../../../src/system_support/base/network/sysnet/sysnet_util.c [ 28e70] SYSNET Unknown Entry Type [ 28e8c] SYSNET Registration Failed [ 28ea8] SYSNET Registration already exists [ 28ecc] SYSNET: Invalid Registration Function [ 28efb] d0SYSNET Deregistration Failed [ 28f28] SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 28f5c] sysNetNotifyPduReceive [ 28f74] Circuit Error - vlan id & intIfNum = 0 [ 28f9c] Error - Unrecognized Encapsulation type [ 28fc8] No source MAC address found [ 28fe8] sysNetPduHdrEncapsulate [ 29000] Out of system buffers. [ 29018] Invalid exit port - could not resolve exit intfNum [ 2904c] sysNetPduIntercept [ 29067] LꈀԀ DRegistered Interceptors: [ 29098] SysnetAF=%d(AF=%d), HookId=%d: [ 290bc] name=%s precedence=%d func=%p [ 290e5] Sysnet Hook Return Code Counters: [ 29108] SysnetAF=%d (AF=%d) [ 29120] HookId=%d: [ 29130] Discard=%d Consumed=%d Copied=%d [ 29158] Ignored=%d Processed=%d Modified=%d [ 29180] ../../../../src/system_support/base/network/tftp/tftp_client.c [ 291c0] Error: TFTP Receive buffer alloc failed! [ 291ec] Wrong value for TFTP command [ 2920c] Error while putting the file [ 2922c] Error while getting the file [ 2924c] Wrong value of mode entered [ 2926c] Error while putting data into the file [ 29294] Error while reading the buffer [ 292b4] error while writing the file [ 292d4] tftpSocketPrepare(): Invalid Address family [ 29300] tftpSocketPrepare(): Failed to create socket [ 29330] tftpSocketPrepare(): osapiSetsockopt SO_REUSEADDR failed [ 2936c] tftpSocketPrepare(): Set socket SO_BROADCAST option error [ 293a8] tftpSocketPrepare(): Bind error [ 293c8] tftpSocketPrepare(): Set socket L7_IP_TTL option error [ 29400] tftpSocketPrepare(): Set socket IP_MULTICAST_TTL option error [ 29440] Send TFTP acknowledgement for block #%d [ 2946c] tftpRequestSend(): Send to error. Errno(%d) [ 29498] Send TFTP request for %s file to %s [ 294c0] tftpGetReplyProcess(): Invalid Address family [ 294f0] tftpGetReplyProcess(): TFTP client has received non TFTP reply [ 29530] TFTP server replied with error message: %s [ 2955c] Data reply from TFTP server : block #%d [ 29588] TFTP: received unexpected block #%d [ 295b0] Error while writing data to file [ 295d4] TFTP reply from %s [ 295e8] tftpGetReplyProcess(): Recv from error [ 29610] a+ [ 29614] tftp_get(): Invalid Address family [ 29638] tftp_get(): Failed to create socket [ 2965c] TFTP transfer failed. Total timeouts %d [ 29688] tftp_get(): No data reply from TFTP server - Connection Timeout [ 296c8] tftp_get(): Send to error [ 296e4] Error while opening the file [ 29704] Wrong value of mode entered [ 29720] tftp_put(): Bind error [ 29738] TFTP Timeout no reply from TFTP server [ 29760] Wrong protocol used [ 29774] Error is: %s with Error code:: %d [ 29798] Send block %d , got ACK for #%d [ 297bc] Wrong protocol used [ 297d4] Server error message is: %s with error code:: %d [ 29808] tftp_put(): recv from error [ 29828] TFTP Timeout %u no ACK from TFTP server... resending block [ 29864] TFTP Timeout no ACK from TFTP server... aborting transfer [ 298a0] tftp_put(): Send to error [ 298bc] Error while reading file [ 298d8] tftp_put(): recv from error [ 298f4] tftp_put(): Failed to create socket [ 29918] r [ 2991c] Error while changing it to file [ 2993c] ../../../../src/system_support/base/network/traceroute/traceroute.c [ 29980] %s %d: %s : osapiMalloc failed [ 299a0] traceRouteCnfgrInitPhase1Process [ 299c4] Failure creating RWLock for traceRouteTable_g. [ 299f4] osapiSelect Returns error %d in %s [ 29a1c] traceRouteSync [ 29a2c] traceRouteAsync [ 29a3c] Could not spawn traceRouteAsync task [ 29a64] traceRouteASyncTask [ 29a78] Error opening ICMP RAW socket. Error = %d [ 29aa4] Error opening UDP socket. Error = %d [ 29acc] Error setting DontFrag flag - ignoring [ 29af8] RFC2925-TRACEROUTE [ 29b0c] Failure in osapiSocketSendTo [ 29b2c] traceRouteSendProbe(): osapiSetsockopt IP_TTL failed errorno %d [ 29b70] traceRouteSendProbe [ 29b84] traceRouteRxPdu [ 29b94] Failure in osapiSocketRecvfrom [ 29be0] Cold Start: Unit: %d [ 29bf8] Warm Start: Unit: %d [ 29c10] My Link Down: Unit: %d Slot: %d Port: %d [ 29c3c] Authent. Failure: Unit: %d IP Address: %s [ 29c68] Link Up: %s [ 29c74] Link Down: %s [ 29c84] Multiple Users: Unit: %d Slot: %d Port: %d [ 29cb0] Diagnostics Link Failure: IfIndex: %d [ 29cd8] Security Intruder Detected: Unit: %d Slot: %d Port: %d Address: %s [ 29d1c] New Spanning Tree Root: %u, Unit: %d [ 29d44] Transitioning Into Loop Inconsistent State: MSTID: %d Unit: %d Slot: %d Port: %d [ 29d98] Transitioning Out Of Loop Inconsistent State: MSTID: %d Unit: %d Slot: %d Port: %d [ 29dec] Spanning Tree Topology Change: %u, Unit: %d [ 29e18] RMON Event: %s [ 29e28] Broadcast Storm Threshold Exceeded: Unit: %d Slot: %d Port: %d [ 29e68] Frames Discarded Threshold Exceeded: Unit: %d Slot: %d Port: %d [ 29ea8] Broadcast Storm Recovery Started: Unit: %d Slot: %d Port: %d [ 29ee8] Broadcast Storm Recovery Ended: Unit: %d Slot: %d Port: %d [ 29f24] General System: Unit: %d [ 29f40] VLAN issue request failed: VLAN: %d [ 29f64] Last or default VLAN deleted: VLAN: %d [ 29f8c] Default VLAN configuration failed: VLAN: %d [ 29fb8] Problem restoring previous VLAN: VLAN: %d [ 29fe4] Fan Status: %s [ 29ff4] Power Supply Status: %s [ 2a00c] dot1q: Unit: %d [ 2a01c] RMON Rising Alarm: Unit: %d Index: %d [ 2a044] RMON Falling Alarm: Unit: %d Index: %d [ 2a06c] Failed User Login: Unit: %d User ID: %s [ 2a094] Local User Locked out: Unit: %d User ID: %s [ 2a0c0] MAC Lock Violation: Unit: %d Slot: %d Port: %d, %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, vlan %d [ 2a120] PoE: Unit: %d Slot: %d Port: %d %s [ 2a144] Unit- %d LLDP Remote Table Change: Inserts: %i, Deletes: %i, Drops: %i, Ageouts: %i [ 2a198] 802.1X Unauthorized Access Attempt: %d Slot: %d Port: %d, %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, vlan %d [ 2a200] IP ACL ID %d, Rule %d, Deny Match - %s time(s) [ 2a230] MAC ACL %s, Rule %d, Deny Match - %s time(s) [ 2a260] 'startup-config' has changed. [ 2a280] TFTP of %s is completed with exit code = %d [ 2a2ac] TFTP of %s is aborted with exit code = %d [ 2a2d8] TFTP of %s is started [ 2a2f0] Link on %s is failed [ 2a308] %s is added to the VLAN %d dynamically [ 2a330] %s is removed from the VLAN %d dynamically [ 2a35c] Stack Master unit %d is failed [ 2a37c] Unit %d is the new stack master, Old stack master unit is %d [ 2a3bc] Stack member unit %d is failed [ 2a3dc] Unit %d is added to the stack [ 2a3fc] Unit %d is removed from the stack [ 2a420] Stack split. The %s units are lost [ 2a444] Splitted stack elected unit %d as master. Old master is unit %d [ 2a484] Stack got rejoined. Current units in the stack are %s [ 2a4bc] Unit %d identified a link failure in the stack. %s [ 2a4f0] %s is transitioned from the Learning state to the Forwarding state in instance %d [ 2a544] %s is transitioned from the Forwarding state to the Blocking state in instance %d [ 2a598] %s is added to the trunk %s [ 2a5b4] %s is removed from the trunk %s [ 2a5d4] %s that is blocked from Mac learning has received a request with new source Mac address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x [ 2a650] A dynamic VLAN %d is added via GVRP [ 2a674] Dynamic VLAN %d has been removed via GVRP [ 2a6a0] Fan %d has changed the state on unit %d to %d [ 2a6d0] Powersupply %d has changed the state on unit %d to %d [ 2a708] Temperature of unit %d has exceeded the device specific limit [ 2a748] Unit %d has finished the copy operation successfully [ 2a780] Copy operation has failed in unit %d [ 2a7a8] %s status is authorized [ 2a7c0] %s status is Unauthorized [ 2a7dc] Unit %d elected as the new STP root [ 2a800] Instance %d has elected a new STP root: %4.4x:%4.4x:%4.4x:%4.4x [ 2a840] An invalid user tried to login through %s from %s [ 2a874] Management ACL violation on %s from %s [ 2a89c] SFP Inserted in Unit %d, Interface %d [ 2a8c4] SFP Removed from Unit %d, Interface %d [ 2a8ec] XFP Inserted in Unit %d, Interface %d [ 2a914] XFP Removed on Unit %d, Interface %d [ 2a93c] LLDP-MED Topology Change Detected: ChassisIDSubtype: %d, ChassisID: %s, DeviceClass: %d [ 2a994] DAI error disabled interface: Unit: %d Slot: %d Port: %d [ 2a9d0] DHCP Snooping error disabled interface: Unit: %d Slot: %d Port: %d [ 2aa14] Temperature change alarm: Sensor ID: %d Event: %d [ 2aa48] Fan state change alarm: Fan ID: %d Event: %d [ 2aa78] Power supply state change alarm: Power supply ID: %d Event: %d [ 2aab8] trapMsgQueueLostMsgs == %d [ 2aad4] trapCfgData.cfg [ 2aae4] Error on call to osapiFsWrite routine on config file %s [ 2ab20] ../../../../src/trapmgr/base/traputil.c [ 2ab48] %s [ 2ab4c] L7_DISABLE [ 2ab58] Trap Manager Authentication Flag - %s [ 2ab80] Trap Manager Link Up/Down Flag - %s [ 2aba8] Trap Manager Multiple Users Flag - %s [ 2abd0] Trap Manager Spanning Tree Flag - %s [ 2abf8] Trap Manager General System State - %s [ 2ac20] Trap Manager Dot1q State - %s [ 2ac40] Trap Manager OSPF State - %s [ 2ac60] Trap Manager VRRP State - %s [ 2ac80] Trap Manager BGP State - %s [ 2aca0] Trap Manager PIM State - %s [ 2acc0] Trap Manager DVMRP State - %s [ 2ace0] Trap Manager Inventory State - %s [ 2ad04] Trap Manager MAC Lock Violation State - %s [ 2ad30] Trap Manager ACL State - %s [ 2ad50] Trap Manager Captive Portal State - %s [ 2ad78] L7_ENABLE [ 2ad84] Built test config data [ 2ad9c] pFileHdr->filename : %s [ 2adb8] pFileHdr->version : %u [ 2add4] pFileHdr->componentID : %u [ 2adf0] pFileHdr->type : %u [ 2ae0c] pFileHdr->length : %u [ 2ae28] pFileHdr->dataChanged : %u [ 2ae44] pFileHdr->savePointId : %u [ 2ae60] pFileHdr->targetDevice: %u [ 2ae7c] pFileHdr->pad[i] : %u [ 2ae98] trapMgrCfgData.checkSum : %u [ 2aeb8] trapQueue [ 2aec4] trapTask [ 2aed0] TRAPMGR: Failed to register with Fan Unit Manager [ 2af04] TRAPMGR: Failed to register with Power Unit Manager [ 2af3c] TRAPMGR: Failed to register with CARDMGR [ 2af68] trapMgrPhaseTwoInit(): Could not register with nvStore [ 2afa0] %d days %02d:%02d:%02d [ 2afb8] trapMgr registrar_ID %d already registered [ 2afe4] trapMgr registrar_ID %d greater then L7_LAST_TRAP_ID [ 2b01c] trapMgr registrar_ID %d not registered [ 2b044] Unknown Trap %d [ 2b056] *<*p***؀++<+d+p+++Ȁ+, ,4,|,--(-4-d-p-|--̀-..8.p...1.1.4 [ 2b0de] OP\P̀P\P\ [ 2b0f4] ../../../../src/usmdb/system_support/base/usmdb_sim.c [ 2b12c] %d:%d [ 2b138] first [ 2b140] last [ 2b149] N |N N |N |N |N %.2d:%.2d:%.2d [ 2b170] PM [ 2b174] %.2d:%.2d:%.2d %s [ 2b188] AM [ 2b18c] %lu%05lu%05lu [ 2b19c] %lu%05lu [ 2b1a8] %lu%05lu%05lu%05lu [ 2b1bc] %lu [ 2b1c0] . [ 2b1c4] : [ 2b1cb] 000Ȁ̀@@ԀXX<XXXXX`lxȀԀhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhHHHHHHHHHH%x [ 2b404] ComponentName: Mnemonic Failed, id=%d [ 2b42c] ComponentName: Name Failed, id=%d [ 2b450] %-4d %-4d %10s %25s [ 2b468] done... [ 2b474] %ud:%02u:%02u:%02u [ 2b488] %02u:%02u:%02u:%02u [ 2b49c] %s %d %d:%d:%d %d [ 2b4b0] PM [ 2b4b4] %s %02d %02d:%02d:%02d %s %d [ 2b4d4] AM [ 2b4d8] / [ 2b4eb] ,8DP\htȀneed dictionary [ 2b5c8] stream end [ 2b5d8] file error [ 2b5e4] stream error [ 2b5f4] data error [ 2b600] insufficient memory [ 2b614] buffer error [ 2b624] incompatible version [ 2b63c] 1.1.4 [ 2b644] dtlArpRecvIP [ 2b654] dtlRecvIP [ 2b660] dtlRecvIP6 [ 2b66c] ../../../../src/dtl/switching_binds/dtl_pkg.c [ 2b69c] DTL: Obtaining End Obj for %d interface failed. [ 2b6d0] ../../../../src/binds/chassis_binds/chassis_hpc_binds/sysapi_hpc_chassis.c [ 2b71c] %s: %d: sysapiHpcEventHandlerCallbackRegister:Event info pasessed as NULL [ 2b77f] ($0BoardName [ 2b7ac] / [ 2b7b0] ramfs [ 2b7b8] Ram FS Mount failed [ 2b7d0] ../../../../bsp/cpu/common/src/featurekey.c [ 2b7fc] Component ID is not keyable [ 2b81c] Invalid Component ID [ 2b834] Invalid value passed for parm 'enabled' [ 2b860] phy_5464S_%s.%d [ 2b870] 0x1 [ 2b874] phy_fiber_detect_%s.%d [ 2b88c] -4 [ 2b890] 0 [ 2b894] memlist_enable [ 2b8a4] reglist_enable [ 2b8b4] help_cli_enable [ 2b8c4] 1 [ 2b8c8] schan_intr_enable [ 2b8dc] ../../../../bsp/platform/broadcom/common/src/hpc_boards.c [ 2b918] miim_intr_enable [ 2b92c] skip_L2_USER_ENTRY [ 2b940] bcm_num_cos [ 2b94c] 8 [ 2b950] hpcHardwareLocalUnitIdentifierMacGet: Error on sysapiRegistryGet with key SYS_MAC [ 2b9a4] ../../../../bsp/platform/broadcom/common/src/hpc_db_util.c [ 2b9e8] none [ 2ba68] A [ 2ba70] %s [ 2ba74] _ [ 2ba78] Ethernet Switch [ 2ba88] SFP_1000_BASE_SX [ 2ba9c] SFP_1000_BASE_LX [ 2bab0] SFP_1000_BASE_LH [ 2bac4] SFP_1000_BASE_BX [ 2bad8] UNSUPPORTED [ 2bae4] SFP_100_BASE_FX [ 2baf4] SFP_100_BASE_BX [ 2bb04] SFP_100_BASE_LX [ 2bb14] is FAULTY [ 2bb20] SFP_NONE [ 2bb2c] SFP_LAST [ 2bb38] userInterfaceTask [ 2bb4c] ../../../../bsp/platform/broadcom/hp/bcm53314/hpc/platform.c [ 2bb8c] Error: Mode led set error [ 2bba8] Error: Unable to get green mode [ 2bbd0] ERROR: Clear Password Failed!!! [ 2bbf0] INFO: Passwords Cleared using clear key [ 2bc18] Error: Unable to get green led time out [ 2bc40] Error: Keys read error [ 2bc58] Error: Unable to get npd id [ 2bc77] Tp܄ܘܬ $8L` Error: Use eeprom_set_mac('xxxxxx-xxxxxx') format [ 2bcd9] Error: Invalid input. Use eeprom_set_mac('xxxxxx-xxxxxx') format [ 2bd1d] Error: Invalid input. Please use charecters 0-9, a-f combinations [ 2bd60] et0macaddr [ 2bd6c] Error: nvram set failed rv = %d [ 2bd91] Setting Mac Address to %s - Successful. [ 2bdbc] Error: nvram commit failed rv = %d [ 2bde5] Error: Use eeprom_set_serial('xxxxxxxxxxx') format [ 2be1c] serial_number [ 2be2d] Error: Invalid input. Number of charactors should not exceed 32. [ 2be71] Setting Serial number to %s - Successful. [ 2bea1] Error: Invalid input. Use eeprom_set_hwver('xxxxxxxxxxx') format [ 2bee4] hwver [ 2beed] Error: Invalid input. Number of characters should not exceed 10. [ 2bf31] Setting Hardware version to %s - Successful. [ 2bf61] Chassis: Port 24: (Auto-Config) calling sysPortAutoConfigSet for Transceiver type %s [ 2bfb8] Error: Unable to get port medium [ 2bfdc] Error: Unable to get port link status [ 2c005] Chassis: Port 24: (Auto-Config) Transceiver type %s plugged in [ 2c048] Chassis: Port 24: (Auto-Config) Transceiver type %s plugged in [ 2c089] Chassis: Port 24: (Auto-Config) Transceiver plugged out [ 2c0c4] Chassis: Port 24: (Auto-Config) Transceiver plugged out [ 2c101] Chassis: Port 24: (Auto-Config) Calling sysPortAutoConfigUnSet for Transceiver type %s [ 2c15d] Chassis: Port 23: (Auto-Config) Calling sysPortAutoConfigSet for Transceiver type %s [ 2c1b5] Chassis: Port 23: (Auto-Config) Transceiver type %s plugged in [ 2c1f8] Chassis: Port 23: (Auto-Config) Transceiver type %s plugged in [ 2c239] Chassis: Port 23: (Auto-Config) Transceiver plugged out [ 2c274] Chassis: Port 23: (Auto-Config) Transceiver plugged out [ 2c2b1] Chassis: Port 23: (Auto-Config) Calling sysPortAutoConfigUnSet for Transceiver type %s [ 2c30d] Chassis: Port %d: (Auto-Config) sysPortAutoConfigUnSet [ 2c348] Chassis: Port %d: (Auto-Config) Unable to disable Auto-negotiation [ 2c38c] Chassis: Port %d: (Auto-Config) Unable to set speed [ 2c3c1] Chassis: Port %d: (Auto-Config) Restored forced speed settings [ 2c404] Chassis: Port %d: (Auto-Config) Unable to apply forced speed settings [ 2c44d] Chassis: Port %d: (Auto-Config) Restoring Auto-negotiation [ 2c48d] Chassis: Port %d: (Auto-Config) Restored Auto-negotiation [ 2c4c8] Chassis: Port %d: (Auto-Config) Unable to enable Auto-negotiation [ 2c50c] Chassis: Port %d: (Auto-Config) Unable to get speed [ 2c540] Chassis: Port %d: (Auto-Config) Unable to get Auto-negotiation status [ 2c588] Chassis: Port %d: (Auto-Config) Do nothing as we already have the desired settings [ 2c5dc] Chassis: Port %d: (Auto-Config) Speed set to 100MB [ 2c611] Chassis: Port %d: (Auto-Config) Speed set to 100MB [ 2c649] Chassis: Port %d: (Auto-Config) Enabled Auto-negotiation [ 2c684] Chassis: Port %d: (Auto-Config) Enabled Auto-negotiation [ 2c6c0] nvram0 [ 2c6c8] cannot open I2C device rv %x [ 2c6eb] Pp\\\\\x\\\\\\\\\\\\\\\\\\\\\\h\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\Āp\\\\\x\\\\\\\Ā\\\\\\\\\\\\\\\Ā\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\hflashFsSync: Can't program region at %d [ 2c920] Applying ... sal_config_settings [ 2c944] phy_led3_mode [ 2c954] 0xa [ 2c958] 0x1 [ 2c95c] i2c_nvram_skip [ 2c96c] bcm_num_cos [ 2c978] 4 [ 2c97c] ../../../../bsp/platform/broadcom/hp/bcm53314/hpc/sysbrds.c [ 2c9b8] trunk_extend [ 2c9c8] 1 [ 2c9cc] xgxs_lcpll_xtal_refclk [ 2c9e4] phy_fiber_pref_ge23 [ 2c9f8] phy_fiber_pref_ge22 [ 2ca0c] phy_automedium_ge22 [ 2ca20] phy_automedium_ge23 [ 2ca34] BCM953314R24GS [ 2ca44] phy_led1_mode [ 2ca54] phy_led2_mode [ 2ca64] 0x0 [ 2ca68] -4 [ 2ca6c] phy_fiber_detect_ge22.0 [ 2ca84] phy_fiber_detect_ge23.0 [ 2ca9c] phy_53314_clk156 [ 2cab0] 0 [ 2cab4] Phys reset complete [ 2cacc] phy_fiber_detect_%s.%d [ 2cbd4] clear_config [ 2cbe4] %u [ 2cbe8] fastpath.cfg [ 2cbf8] Configuration file delete Failed.! [ 2cc1c] Configuration file delete Successful.! [ 2cc44] %s%d [ 2cc4c] dtl [ 2cc50] ../../../../src/ipstack/mapping/ipstk_if.c [ 2cc7c] Failed to add default gateway %s via interface %s to IP stack [ 2ccbc] lo0 [ 2ccc0] snmp [ 2ccc8] doDebugging [ 2ccd4] (1|0) [ 2ccdc] debugTokens [ 2cce8] token[,token...] [ 2ccfc] , [ 2cd00] Debug token %s over length [ 2cd1c] all [ 2cd20] registered debug token %s, %d [ 2cd40] Unable to register debug token %s [ 2cd64] %d tokens registered : [ 2cd7c] %d) %s : %d [ 2cd8c] %s [ 2cd90] %s [TRUNCATED] [ 2cda0] [TRUNCATED] [ 2cdb4] %s%s [ 2cdbc] .%lu--%lu [ 2cdc8] .%lu [ 2cdd0] dumpx_%s [ 2cddc] dumpx%s [ 2cde4] %s: %s [ 2cdec] %s: [ 2cdf4] daemonize [ 2ce00] deamonizing... [ 2ce10] %s=%s [ 2ce18] / [ 2ce1c] Creating directory: %s [ 2ce34] netsnmp_mktemp [ 2ce44] trace [ 2ce4c] %s(): %s, %d: [ 2ce5c] ../../../../vendor/netsnmp/snmplib/system.c [ 2ce88] temp file created: %s [ 2cea0] netsnmp_mktemp: error creating file %s [ 2cec8] sysname '%s', release '%s', version '%s', machine '%s' [ 2cf00] %2x [ 2cf04] [ 2cf08] trace [ 2cf10] %s(): %s, %d: [ 2cf20] dump_chunk [ 2cf2c] ../../../../vendor/netsnmp/snmplib/tools.c [ 2cf59] %s [ 2cf60] %s [ 2cf64] dtl0 [ 2cf6c] dev_net0 [ 2cf78] END: [ 2cf80] device initialization start [ 2cfa0] end_drv_init : mac=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x [ 2cfd4] device initialization end [ 2cff0] dtlEndTask [ 2cffc] loop back not initialized [ 2d018] DTL END: Could not create dtlEndTask [ 2d040] ../../../../os/ecos/mgmt/dtl_net.c [ 2d064] t->name: %s [ 2d070] dtlEndTask [ 2d07c] Length of the packet from IP Stack is: %d [ 2d0a8] Could not find entry for mac=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x [ 2d0e4] Out of system buffers. [ 2d0fc] No buffers for packet TX [ 2d118] end_start: device start begin [ 2d138] end_start: device start end [ 2d154] end_stop: begin [ 2d164] end_stop: end [ 2d174] SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 2d1a8] dtlIPProtoRecv [ 2d1b8] end_receive : memory allocate failed for sgpkt [ 2d1e8] intIfNum on which ARP Packet arrived is: %d [ 2d214] Removing VLAN TAG in %s [ 2d22c] dtlARPProtoRecv [ 2d23c] end_send: Tx %d: %d sg's, %d bytes, KEY %x [ 2d268] enqueuing packet here [ 2d280] end_send: pkt = NULL [ 2d298] end_enq: taking lock [ 2d2b0] end_enq: got the lock [ 2d2c8] end_enq: signalling endtask [ 2d2e4] end_enq: unlocked lock [ 2d2fc] end_deq: taking lock [ 2d314] end_deq: got the lock [ 2d32c] end_deq: unlocking 2 [ 2d344] end_deq: wait for packet [ 2d360] end_deq: received the packet [ 2d380] TxDone %d : KEY %x [ 2d394] DTL avl mac delete error! [ 2d3b0] DTL avl mac delete ALL error! [ 2d3d0] cur entries - %10d [ 2d3e4] dup adds - %10d [ 2d3f8] bad adds - %10d [ 2d40c] bad dels - %10d [ 2d420] %s%d [ 2d428] dtl [ 2d42c] Hw add. set properly [ 2d444] dtlIpBufSend [ 2d454] persist.txt [ 2d460] slog%d.txt [ 2d46c] olog%d.txt [ 2d47a] File size of %s file is %d [ 2d49a] Failed to print the file contents of %s fileName [ 2d4d0] log2.bin [ 2d4dc] ../../../../os/ecos/log/log_extend.c [ 2d504] Log_Init: Cannot malloc enough memory to create log [ 2d53c] Log_Init: Re-initializing logs, old size %d, new size %d [ 2d578] EVENT> [ 2d580] ERROR> [ 2d588] %4ld [ 2d590] %08lX [ 2d598] %08lX [ 2d5a0] %4d %2d %2d %2d [ 2d5b8] CORRUPT ENTRY >>>>>>> [ 2d5d0] %08lX [ 2d5d8] Machine Check > [ 2d5ec] Watchdog > [ 2d5f8] srr0:%08lX [ 2d604] dar:%08lX [ 2d610] ../../../../os/ecos/osapi/osapi.c [ 2d638] A [ 2d640] Ae [ 2d648] AuO [ 2d650] Ae [ 2d658] >uMUi?bMosapiDebugRegisteredSysInfoDump [ 2d68c] /*=====================================================================*/ [ 2d6d8] /* OS INFORMATION */ [ 2d728] /*------------------------------*/ [ 2d74c] /* Output of osapiShowTasks(): */ [ 2d770] /* Output of cat /proc/meminfo */ [ 2d794] /proc/meminfo [ 2d7a8] %s [ 2d7ac] /* Output of cat /proc/cpuinfo */ [ 2d7d0] /proc/cpuinfo [ 2d7e0] /*---------------------------------*/ [ 2d808] /* Output of cat /proc/interrupts */ [ 2d830] /proc/interrupts [ 2d844] /* Output of cat /proc/version */ [ 2d868] /proc/version [ 2d878] /*-----------------------------------*/ [ 2d8a4] /* Output of cat /proc/net/sockstat */ [ 2d8d0] /proc/net/sockstat [ 2d8e4] /mnt/application/top.out [ 2d900] top -b -n 1 -d 0 > %s [ 2d918] Unable to perform request [ 2d934] Mem [ 2d938] Error: Out of Memory [ 2d950] %s%s:%d %s [ 2d95c] %s%s [ 2d968] ============================================ [ 2d998] ECOS Memory Information: [ 2d9b4] TOTAL size of memory arena = %d [ 2d9d8] number of ordinary memory blocks = %d [ 2da04] number of small memory blocks = %d [ 2da2c] number of mmapped regions = %d [ 2da50] total space in mmapped regions = %d [ 2da78] space used by small memory blocks = %d [ 2daa4] space available for small memory blocks = %d [ 2dad4] space used by ordinary memory blocks = %d [ 2db04] space FREE for ordinary blocks = %d [ 2db2c] top-most, releasable (via malloc_trim) space = %d [ 2db64] size of LARGEST free block = %d [ 2db88] ID: %04x name: %10s pri: %d stack_size:%u stack_used: %u [ 2dbc4] ---- [ 2dbd0] . [ 2dbd4] %s [ 2dbdc] %lu [ 2dbe5] Total size %d [ 2dbf8] : access() returned %d %s [ 2dc1c] : write() returned %d %s [ 2dc3c] : close() returned %d %s [ 2dc5c] : read() returned %d %s [ 2dc7c] : open() returned %d %s [ 2dc9c] Queue ID: %d (0x%x) [ 2dcb4] Queue Name: %s [ 2dcc4] Mem Size: %d [ 2dcd4] Max Msg: %d [ 2dce4] Num Msg: %d [ 2dcf8] ../../../../os/ecos/osapi/osapi_msgq.c [ 2dd20] q%d [ 2dd24] Queue Queue Messages Num threads waiting to Messages [ 2dd70] ID Name in Queue Send Receive High [ 2ddb8] ----- ----- -------- ---------- ----------- -------- [ 2de04] %x - %-16.15s %6d %6d %6d %6d [ 2de30] Display Ends [ 2de40] %s [ 2de44] ../../../../os/ecos/osapi/osapi_net.c [ 2de6c] osapimRouteEntryAdd, errno %d adding 0x%lx to %s [ 2dea0] osapimRouteEntryAdd - SIOCADDRT [ 2dec4] %s: %s [ 2decc] osapimRouteEntryAdd - failed to open socket. [ 2defc] osapimRouteEntryDelete - Unsupported protocol %d [ 2df30] osapimRouteEntryDelete, errno %d deleting 0x%lx from %s [ 2df6c] osapimRouteEntryDelete SIOCDELRT [ 2df90] osapimRouteEntryDelete - failed to open socket. [ 2dfc4] dtl0 [ 2dfcc] l3intfAddRoute: Failed to Add Route [ 2dff4] Failed to Open Socket [ 2e00c] l3intfDeleteRoute: Failed to Delete Route [ 2e038] osapiNetIPGet: unable to open a socket! sock = %d [ 2e06c] osapiNetMbufGetNextBuffer not yet implemented! [ 2e09c] osapiNetMbufGetNextMbuf not yet implemented! [ 2e0cc] osapiNetMbufGetFrameLength not yet implemented! [ 2e100] osapiNetMbufFree not yet implemented! [ 2e128] 127.0.0.1 [ 2e134] lo0 [ 2e138] 255.0.0.0 [ 2e144] setsockopt [ 2e150] SIOCIFADDR 2 [ 2e160] osapiNetIfConfig - SIOCSIFFLAGS 2 [ 2e184] osapiNetIPSet: ioctl on %s failed: addr: 0x%x, err: %d [ 2e1bc] osapiNetIfConfig - SIOCSIFBRDADDR [ 2e1e0] osapiNetIfConfig: ioctl on %s failed: addr: 0x%x, err: %d [ 2e21c] osapiNetIfConfig - SIOCSIFNETMASK [ 2e240] osapiNetIfConfig - SIOCSIFADDR [ 2e260] SIOCDIFADDR1 [ 2e270] SIOCSIFFLAGS down [ 2e284] %s0 [ 2e288] osapiNetIPSet: ioctl on %s failed: %d [ 2e2b0] osapiNetIPSet - SIOCSIFFLAGS 2 [ 2e2d0] osapiNetIPSet - SIOCSIFFLAGS 1 [ 2e2f0] osapiNetIPSet - SIOCGIFFLAGS [ 2e310] osapiNetIPSet - SIOCSIFBRDADDR [ 2e330] osapiNetIPSet - SIOCGIFNETMASK [ 2e350] osapiNetIPSet - SIOCSIFADDR [ 2e370] osapiNetIPSet: ioctl on %s failed: addr: 0x%lx [ 2e3b4] %d.%d.%d.%d [ 2e3c0] ping id = %u [ 2e3d0] recvfrom() error [ 2e3e4] recvfrom error [ 2e3f4] osapiPingTimed - inet_aton error, host = %s [ 2e424] osapi_ping_rx [ 2e434] ping: sendto error [ 2e448] osapiPingTimed - osapiTaskCreate error %d [ 2e474] Unknown [ 2e47c] P.1.6 [ 2e484] /mnt/application/fastpath.vpd [ 2e4a4] r [ 2e4a8] Vital Product Data:- [ 2e4c0] Operational Code Image File Name - %s [ 2e4e8] Rel %s Ver %s Maint Lev %s Bld No %s [ 2e511] Timestamp - %28c [ 2e524] %s.%s.%s.%s [ 2e530] eCos-2.0 [ 2e53c] ../../../../os/ecos/osapi/osapi_rwlock.c [ 2e568] ../../../../os/ecos/osapi/osapi_sem.c [ 2e590] ../../../../os/ecos/osapi/osapi_stdlib.c [ 2e5bc] %d [ 2e5c0] ERROR [ 2e5c8] ../../../../os/ecos/osapi/osapi_support.c [ 2e5f4] tftp(): Invalid Address family [ 2e614] osapiSocketBind: bind failed for socket %d errno %d [ 2e64c] bind failed [ 2e658] %s: %s [ 2e667] @HxxxxPX`hpxxxxxxmRrouteDelete - Not Implemented. [ 2e6d0] Received image file size is more than maximum supported Image size (%d bytes ) [ 2e720] ? [ 2e728] >Ey0:Ey0:Calling self [ 2e748] osapi_task_init(): Fatal error %d creating stack monitor thread [ 2e78c] ../../../../os/ecos/osapi/osapi_task.c [ 2e7b4] osapi_task_wrapper: task_list_lock error [ 2e7e0] osapiTaskDelete: zombie_tasks_lock error [ 2e80c] osapiTaskCreate: Could not set stack address / size, error %d [ 2e84c] osapiTaskCreate: task_list_lock error [ 2e874] osapiTaskCreate: Error creating task: 0x%08X [%s], error %d [ 2e8b4] osapiTaskCreate cleanup: task_list_lock error [ 2e8e4] t%d [ 2e8e8] osapiTaskDelete: queue->lock error, rc = %d, can't delete! [ 2e924] osapiTaskDelete: task_list_lock error [ 2e94c] osapiTaskDelete: osapiTask->lock error, rc2 = %d 2 [ 2e980] osapiTaskDelete: osapiTask->lock error [ 2e9a8] osapiShowTasks: task_list_lock error [ 2e9d0] Name OPri PPri CPri sSize Stat WaitQ TaskID PID, StkUsed [ 2ea28] %-14.14s %4d %4d %4d %8d %8x %8x %#8x %8d %8d [ 2ea5c] osapiTaskLock: osapi_task_lock error [ 2ea84] osapiTaskLock: self->lock error [ 2eaa8] osapiTaskUnlock: osapi_task_lock error [ 2ead0] osapiTaskUnlock: self->lock error [ 2eaf4] osapiDisableInts: osapi_task_int error [ 2eb1c] osapiDisableInts: self->lock error [ 2eb40] osapiEnableInts: osapi_task_int error [ 2eb68] osapiEnableInts: self->lock error [ 2eb8c] osapiStopUserTimer: Timer 0x%08x out of range (<)! [ 2ebc0] osapiStopUserTimer: Timer 0x%08x out of range (>)! [ 2ebf4] ../../../../os/ecos/osapi/osapi_time.c [ 2ec1c] osapiRestartUserTimer: Timer 0x%08x out of range (<)! [ 2ec54] osapiRestartUserTimer: Timer 0x%08x out of range (>)! [ 2ec8c] osapiChangeUserTimer: Timer 0x%08x out of range (<)! [ 2ecc4] osapiChangeUserTimer: Timer 0x%08x out of range (>)! [ 2ecfc] osapiTimerAddMain: No free timers available! [ 2ed2c] osapiTimerAdd: Timer with NULL callback NOT added! [ 2ed60] osapiTimerFree: Timer 0x%08x out of range (<)! [ 2ed90] osapiTimerFree: Timer 0x%08x out of range (>)! [ 2edc0] osapiTimerHandler: Timer 0x%08x callback NULL!, next 0x%08x, prev 0x%08x [ 2ee0c] Timer.callback: 0x%08x [ 2ee28] Timer.parm1: 0x%08x [ 2ee40] Timer.parm2: 0x%08x [ 2ee58] Timer.timer_running: %d [ 2ee74] Timer.timer_in_use: %d [ 2ee90] Timer.time_count: %d [ 2eea8] Timer.orig_count: %d [ 2eec0] next: 0x%08x [ 2eed0] prev: 0x%08x [ 2eee0] Timer %d, 0x%08x: [ 2eef4] Timer %d, 0x%08x, running: %d, next: 0x%08x, prev: 0x%08x [ 2ef30] Timer %d, 0x%08x orphaned, running = %d [ 2ef5c] osapi_waitq_create: queue_list_mutex error [ 2ef88] osapi_waitq_destroy: queue_list_mutex error [ 2efb8] osapi_waitq_enqueue: self->lock error [ 2efe0] osapi_waitq_enqueuep: self->lock error [ 2f008] osapi_waitq_enqueuep: self->lock error 2 [ 2f034] osapi_waitq_enqueuef: self->lock error [ 2f05c] osapi_waitq_enqueuef: self->lock error 2 [ 2f088] %s: invalid osapi_task_key [ 2f0a4] osapi_waitq_enqueue [ 2f0b8] ../../../../os/ecos/transfer/transfer.c [ 2f0e0] TFTP [ 2f0e8] Code [ 2f0f0] transfer starting... [ 2f108] Config [ 2f110] Text Config [ 2f120] Error Log [ 2f12c] Message Log [ 2f13c] Trap Log [ 2f148] Host key [ 2f154] Certificate [ 2f164] Unknown filetype [ 2f178] Configuration Script [ 2f190] CLI Banner [ 2f19c] Xmodem [ 2f1a4] SFTP [ 2f1ac] SCP [ 2f1b4] Ymodem [ 2f1bc] Zmodem [ 2f1c4] Unknown protocol [ 2f1db] <(HT`lx<܀\|܀؜؜؜ؼؼؼؼ܀cd %s ; [ 2f244] /mnt/download/ [ 2f254] s [ 2f258] x [ 2f25c] [ 2f260] cd %s ; mv * %s >/dev/null 2>&1 [ 2f280] z [ 2f284] b [ 2f288] r [ 2f28c] w [ 2f292] Message Log Empty [ 2f2a4] Time [ 2f2d8] File Line TaskID Code d h m s [ 2f310] %s [ 2f318] TFTP code transfer failed. File do not exists. [ 2f348] TFTP Upload failed. File %s do not exist. [ 2f374] TFTP code transfer starting [ 2f390] Unknown transfer type! [ 2f3a8] File transfer failed! [ 2f3c0] File transfer operation completed successfully. [ 2f3f0] TFTP config transfer starting [ 2f410] fastpath.cfg [ 2f420] asciilog.bin [ 2f430] %s/%s [ 2f438] Error while preparing file for transfer! [ 2f464] File type unknown! [ 2f478] msg.txt [ 2f480] trap.txt [ 2f493] l\\xDownload [ 2f4b4] '%s' [ 2f4bc] %s failed for %s. %s is not a valid stk file. [ 2f4ec] %s failed for %s file. %s is not a valid stk file. [ 2f520] Invalid stk code file received failure. [ 2f548] %s failed for %s. Image size is bogus in %s. [ 2f578] %s failed for %s file. Image size is bogus in %s. [ 2f5ac] %s failed for %s. CRC validation failed. %s file may be corrupted or invalid. [ 2f5fc] %s failed for %s file. CRC validation failed. %s file may be corrupted or invalid. [ 2f650] Check sum failure in the code file failure. [ 2f680] %s failed for %s. %s file is not intended for this platform. [ 2f6c0] %s failed for %s. %s file is not intended for this platform. [ 2f700] Device and code intended device do not match failure. [ 2f738] Code is proper success. [ 2f754] %s failed for %s. Opr file is not in intended 7z format in %s file. [ 2f798] %s failed for %s. Opr file is not in intended 7z format in %s file. [ 2f7e0] Code is not in intended 7z format failure. [ 2f80c] %s failed for %s. %s is not valid. [ 2f830] Empty code file received failure. [ 2f854] Upload [ 2f85c] Failure updating code! [ 2f874] Insufficient memory to perform the file upload. [ 2f8a4] Available Free memory is not sufficient. [ 2f8d0] File failed validation check in upload. [ 2f8fc] Flash Read Failed. [ 2f910] Flash read failed. [ 2f924] File transfer failed. Flash Write failed. [ 2f950] Download failed to '%s'. Flash write failed! [ 2f980] Download failed for '%s' file.Flash write failed! [ 2f9b4] backup-fastpath [ 2f9c4] Configuration file failed validation check! [ 2f9f2] Updating SSL certificate... [ 2fa14] File download failed! [ 2fa2c] File transfer complete...storing configuration... [ 2fa60] Configuration update completed successfully. [ 2fa90] Download to '%s' is successful. [ 2fab4] Configuration file download is successful. [ 2fae0] Configuration file download failed for '%s' from '%s' [ 2fb18] Configuration file download failed for '%s' from '%s'. [ 2fb50] This configuration file is invalid! [ 2fb74] rootcert.pem [ 2fb84] server.pem [ 2fb90] dh512.pem [ 2fb9c] dh1024.pem [ 2fba8] TempConfigScript.scr [ 2fbc0] /mnt/download//cli.bnr [ 2fbd8] cli.bnr [ 2fbe3] T|44444444,@Th4|Unknown transfer direction request! [ 2fc4c] %c.%d.%d [ 2fc58] %d.%d.%d [ 2fc64] /mnt/application/ [ 2fc78] cd %s ; md5sum -c %s >/dev/null 2>&1 [ 2fca0] UPDATE_BOOTCODE.md5sum [ 2fcb8] Failure extracting upgrade instructions! [ 2fce4] Updating bootrom... [ 2fcf8] cd %s ; sh %s -q [ 2fd0c] UPDATE_BOOTCODE [ 2fd1c] Invalid option passed to UPDATE! [ 2fd40] Bootrom file not found! [ 2fd58] MD5 checksum failure! [ 2fd70] Flash erase failed! [ 2fd84] File save failed! [ 2fd98] Unknown error occurred! [ 2fdbb] $0LXCannot program the flash as Image size is greater than 1.625MB [ 2fe08] Cannot program the flash as Image Size is greater than 1.625MB [ 2fe48] . [ 2fe4c] ERROR writing device flash. err=%d [ 2fe70] ERROR reading device flash. err=%d [ 2fe94] image1 [ 2fe9c] image2 [ 2fea4] /dev/flash1 [ 2feb1] ERROR not a valid image [ 2fecc] /dev/flash2 [ 2fed8] Unknown file type [ 2feec] ERROR opening %s [ 2ff00] No configuration file exists in the system! [ 2ff2c] image2_size [ 2ff38] image1_size [ 2ff44] %u [ 2ff48] %s not a valid image [ 2ff60] Unknown filetype [ 2ff74] boot.dim [ 2ff80] /dev/boot.dim [ 2ff92] cyg_io_lookup failed because [ 2ffb0] %s: %s [ 2ffbc] ---IMAGE--- [ 2ffcc] get [ 2ffd0] osapiFsFileCreate failed [ 2ffec] executing L7_TFTP_COPY %s %s %s 0x%x [ 30014] octet [ 3001c] File transfer failed for '%s'. [ 30040] File transfer failed for '%s'. [ 30060] File Transfer completed status = %d [ 30088] Upload failed from '%s'. [ 300a4] Upload configuration file failed. [ 300c8] Upload configuration file failed [ 300ec] Download successful to '%s'. [ 3010c] Download successful for '%s' [ 3012c] File transfer is successful for '%s'. [ 30154] Configuration file upload is successful. [ 30180] Upload from '%s' is successful. [ 301a4] Selected file '%s' may not exists or is empty [ 301d4] Selected file '%s' may not exists or is empty [ 30204] Insufficient memory to perform the file download. [ 30238] put [ 3023c] Error: Invalid image numbers [ 3025c] image1 [ 30263] [ 30268] image2 [ 30270] image1 [ 30278] Error: Image not available [ 30299] Test started [ 302a9] Erase started [ 302b8] pos: 0x%x size: 0x%x %d [ 302d4] Test Failed [ 302e4] Erase Failed [ 302f4] Test Passed [ 30304] Erase Done [ 30314] RAM FS base addr is 0x%x [ 30330] Usage is flashErase(offset,size) [ 30354] Image1 Erase Done. [ 30368] Image2 Erase Done. [ 3037c] Image Erase Failed. [ 303a3] XX../../../../src/mgmt/mgmt_support/security/mapping/openssl/openssl_util.c [ 303f4] OPENSSL: OpenSSL initialization failed! [ 30420] openssl_locking_function LOCK - n=%d, semaBuf[n]=%x [ 30458] openssl_locking_function UN-LOCK - n=%d, semaBuf[n]=%x [ 30490] openssl_id_function - taskId=%x [ 304b4] openssl_dyn_create_function - sem=%x [ 304dc] OPENSSL: Could not delete the dynamic semaphore! [ 30510] dyn_lock_function LOCK - l=%x [ 30530] dyn_lock_function UN-LOCK - l=%x [ 30554] OPENSSL: Could not allocate space for the mutex semaphore! [ 30590] OPENSSL: Did not need to clean up the SSL semaphores! [ 305c8] OPENSSL: Could not delete the SSL semaphores! [ 305f8] OPENSSL: PEM DH params not read [ 3061c] OPENSSL: opensslFileOpen could not open %s [ 30648] sslt.cfg [ 30654] SSLT: osapiFsWrite returns error, config file %s [ 30688] ../../../../src/mgmt/mgmt_support/security/ssl_tunnel/sslt_cfg.c [ 306d0] TestPhrase [ 306dc] Built test config data [ 306f4] ssltCfg->cfg.ssltAdminMode = %d [ 30720] ssltCfg->cfg.ssltSecurePort = %d [ 3074c] ssltCfg->cfg.ssltPemPassPhrase = %s [ 30778] ssltCfg->cfg.ssltUnSecurePort = %d [ 307a4] ssltCfg->cfg.ssltUnSecureServerAddr = %d [ 307d0] ssltCfg->cfg.ssltProtocolSSL30 = %d [ 307fc] ssltCfg->cfg.ssltProtocolTLS10 = %d [ 30828] Scaling Constants [ 3083c] ----------------- [ 30850] None - [ 3085c] ssltCfg->checkSum : %u [ 30875] ssltAdminMode: 0x%08x [ 30894] ssltOperMode: 0x%08x [ 308b4] ssltListenTaskId: 0x%08x [ 308d4] ssltSecurePort: 0x%08x [ 308f8] ssltAuxOperMode: 0x%08x [ 30918] ssltAuxSecurePort1: 0x%08x [ 30938] ssltAuxSecurePort2: 0x%08x [ 30958] ssltAuxListenTaskId1: 0x%08x [ 30978] ssltAuxListenTaskId2: 0x%08x [ 30998] ssltUnSecurePort: 0x%08x [ 309b8] ssltProtocolLevel: 0x%08x [ 309d8] ssltUnSecureServerAddr: 0x%08x [ 309fc] ../../../../src/mgmt/mgmt_support/security/ssl_tunnel/sslt_cnfgr.c [ 30a40] ssltApiCnfgrCommand: Failed calling ssltIssueCmd. Failed to send the message to the SSLT message queue. [ 30aac] ssltQueue [ 30ab8] ssltInit: msgQueue creation error. [ 30adc] ssltInit: Failed calling ssltIssueCmd. [ 30b04] sslt.cfg [ 30b12] 3 344h4h../../../../src/mgmt/mgmt_support/security/ssl_tunnel/sslt_control.c [ 30b6c] SSLT: Unable to create the task semaphore [ 30b98] ssltTask [ 30ba4] SSLT: Unable to initialize ssltTask [ 30bcc] SSLT: Failed to create the ssltTask [ 30bf4] ssltDHCreate [ 30c04] SSLT: osapiMessageReceive failed, rc = %d [ 30c30] SSLT: Failed to create the ssltDiffieHellmanParamsCreate task. [ 30c70] SSLT: Failed to create a ssltListenTask, unknown secureType. [ 30cb0] %s.%u [ 30cb8] ssltLSTN [ 30cc4] ssltListenTaskStartup exit [ 30ce1] ssltListenTaskStartup - Created task id = %x [ 30d10] SSLT: Failed to create the ssltListenTask: %s. [ 30d40] ssltListenTaskStartup - Creating task:%s. [ 30d6c] ssltListenTaskStartup - ssltSecureAuxPort2:%d is already listening. [ 30db4] ssltListenTaskStartup - ssltSecurePort:%d is already listening. [ 30df8] ssltListenTaskStartup - ssltSecureAuxPort1:%d is already listening. [ 30e40] SSLT: Failed to create certificate. [ 30e68] SSLT: DH parameters have not been generated. [ 30e98] ssltListenTaskStartup enter [ 30eb8] SSLT: Exceeded maximum, ssltConnectionTask [ 30ee4] ssltConnTask [ 30ef4] SSLT: Failed to create the ssltConnectionTask. Exceeded maximum allowed SSLT connections. [ 30f50] SSLT: Failed to create the ssltConnectionTask. Insufficient memory for creating SSLT connection. [ 30fb4] ssltListenTask - ssl = %x [ 30fd0] SSLT: Error creating SSL context [ 30ff4] SSLT: Error accepting connection [ 31018] ssltListenReady [ 3102c] %u [ 31030] ssltListenTask exit [ 31048] ssltListenTask init complete [ 31068] ssltListenTask - Task:%x listening on port:%s [ 31098] SSLT: Error reading sockFD [ 310b4] SSLT: Error binding Secure server socket [ 310e0] ssltListenTask - acc = %x [ 310fc] SSLT: Error creating Secure server socket [ 31128] ssltListenTask entry [ 31140] SSLT: Error on accepting the SSL connection! [ 31170] SSLT: Couldn't write sockname to emWeb, %d %s [ 311a0] SSLT: Couldn't write sockname to emWeb, getsockname call failed. [ 311e4] SSLT: Couldn't write peer to emWeb, %d %s [ 31210] SSLT: Couldn't write peername to emWeb, getpeername call failed. [ 31254] SSLT: Can't connect to unsecure server at %s, result = %u, errno = %d. Failed to open connection to unsecure server. %s is the unsecure server socket address. %u is the result returned from connect function and %d is the error code. [ 31340] SSLT: Error opening unsecure connection to %s [ 31370] ssltConnectionTask [ 31384] SSLT: Msg Queue is full, event=%u. Failed to send the received message to the SSLT message queue as message queue is full. %u indicates the event to be sent. [ 31424] SSLT: Invalid event received [ 31444] SSLT: Invalid data received [ 31466] MMMMMPMMMhMMMMSSLT: Unknown UI event in message, event=%u. Failed to dispatch the received UI event to the appropriate SSLT function as its an invalid event. %u indicates the event to be dispatched. [ 31552] NHNhNxNNNNȀNԀNNO OssltEventAdminModeSet listening port %d failed to start. [ 315bc] ssltEventAdminModeSet listening port %d started. [ 315f0] ssltEventAdminModeSet starting up ssltSecurePort. [ 31624] ssltEventAdminModeSet entered. [ 31644] ssltEventAuxModeSet listening port %d failed to start. [ 3167c] ssltEventAuxModeSet listening port %d started. [ 316ac] ssltEventAuxModeSet starting up ssltAuxSecurePort2 on port %d. [ 316ec] ssltEventAuxModeSet already listening on port %d. [ 31720] ssltEventAuxModeSet entered. [ 31740] ./sslt.rnd [ 3174c] dh512.pem [ 31758] dh1024.pem [ 31764] ssltDiffieHellmanCallback [ 31780] rootcert.pem [ 31790] sslt_cert2.pem [ 317a0] server.pem [ 317ac] sslt_key2.pem [ 317bc] ../../../../src/mgmt/mgmt_support/security/ssl_tunnel/sslt_util.c [ 31800] SSLT: Error getting certificate file for certficate number %u [ 31840] SSLT: Error loading certificate from file %s. Failed while loading the SSLcertificate from specified file. %s indicates the file from where the certificate is being read. [ 318ec] SSLT: Error loading private key from file. Failed while loading private key for SSL connection. [ 31950] ./ [ 31954] SSLT: Did not find SSL PEM file %s%s, OK to continue [ 3198c] SSLT: Error loading SSL PEM file and/or directory [ 319c0] SSLT: Error setting cipher list (no valid ciphers). Failed while setting cipher list. [ 31a18] SSLT: Successfully loaded all required SSL PEM files [ 31a50] SSLT: Error reading certificate file for certficate number %u [ 31a90] ssltCheckAndListenTaskCleanup - cleanup SSLT_SECURE_AUX_PORT1 [ 31ad0] ssltCheckAndListenTaskCleanup - cleanup SSLT_SECURE_ADMIN [ 31b0c] ssltCheckAndListenTaskCleanup - both modes are disabled [ 31b48] ssltListenTaskCleanup - Deleting task = %x [ 31b74] ssltListenTaskCleanup - Free ctx = %p [ 31b9c] ssltListenTaskCleanup - acc3 = %x [ 31bc0] ssltListenTaskCleanup - acc1 = %x [ 31be4] ssltListenTaskCleanup - acc2 = %x [ 31c08] ssltListenTaskCleanup [ 31c20] SSHD: ssltServerCredentialsCreate failed [ 31c4c] ssltCertGenTask [ 31c5c] SSHD: Failed to create the ssltCertGenTask task [ 31c90] SSLT: creating server RSA key pair... [ 31cb8] SSLT: verifying RSA key pair... [ 31cdc] SSLT: ssltServerCredentialsCreate, RSA key generation failed [ 31d1c] SSLT: ssltServerCredentialsCreate, failed to create subject name [ 31d60] SSLT: ssltServerCredentialsCreate, failed to assign certificate subject [ 31dac] self-signed [ 31db8] SSLT: ssltServerCredentialsCreate, failed to create issuer name [ 31dfc] SSLT: ssltServerCredentialsCreate, failed to assign certificate issuer [ 31e44] SSLT: ssltServerCredentialsCreate, failed to set X509 version [ 31e84] SSLT: ssltServerCredentialsCreate, failed to assign serial number [ 31ec8] SSLT: ssltServerCredentialsCreate, failed to assign certificate public key [ 31f14] SSLT: ssltServerCredentialsCreate, failed to set certificate valid days [ 31f60] SSLT: ssltServerCredentialsCreate, failed to write RSA key file [ 31fa4] SSLT: ssltServerCredentialsCreate, failed to write server certificate file [ 31ff0] SSLT: ssltServerCredentialsCreate, failed to sign certificate [ 32030] SSLT: ssltServerCredentialsCreate, RSA key assignment failed [ 32070] SSLT: ssltServerCredentialsCreate, failed to read RSA key file [ 320b0] SSLT: ssltServerCredentialsImport, failed to read RSA key file [ 320f0] SSLT: ssltServerCredentialsImport: failed to verify certficate against private key [ 32144] SSLT: ssltServerCredentialsImport: failed to save certificate [ 32184] SSLT: ssltServerCredentialsImport: failed to delete previous certificate [ 321d0] SSLT: ssltServerCredentialsImport: failed to parse certificate [ 32210] Jan [ 32214] Feb [ 32218] Mar [ 3221c] Apr [ 32220] May [ 32224] Jun [ 32228] Jul [ 3222c] Aug [ 32230] Sep [ 32234] Oct [ 32238] Nov [ 3223c] Dec [ 32240] GMT [ 32248] %s %2d %02d:%02d:%02d %d%s [ 32268] %02X [ 32270] ../../../../src/application/switching/vlan/dot1q/dot1q_api.c [ 322b0] Cannot put a message on dot1q msg Queue %d [ 322e0] Incorrect switchport mode for vlan participation. Mode: %d Interface: %d [ 3232c] Cannot get the switchport mode Interface: %d [ 3235c] VLAN %d not in range [ 32374] dot1dPortTrafficClassSet : intIfNum %d priority %d trafficClass %d [ 323bc] %s: nimGetHighestIntfNumber failed [ 323e4] dot1qIntfInVIDnumGet [ 323fc] Incorrect switchport mode for vlan participation. Mode: %d Interface: %s [ 32448] Invalid dot1q Interface: %s [ 32468] Incorrect mode for vlan participation. Mode: %d Interface: %s [ 324a8] Cannot set membership for interface %s on non existant vlan %d [ 324e8] Intf is not configurable: Interface: %s [ 32514] Could not get nimMaskIdOffset for Interface %s [ 32544] Incorrect tagmode for vlan tagging. tagmode: %d Interface: %s [ 32584] Cannot set tagging for interface %s on non existant vlan %d [ 325c4] Intf(%d) not configurable [ 325e0] Cannot set access vlan on port not in acces mode(%d) [ 32618] Cannot Get access vlan on port not in acces mode(%d) [ 32650] Cannot put a message %d on dot1q msg Queue %d [ 32680] Intf(%s) not configurable [ 3269c] Cannot Get untagged vlan on port not in dual mode(%d) [ 326d4] dot1q.cfg [ 326e0] Error on call to sysapiCfgFileWrite routine on config file %s [ 32720] ../../../../src/application/switching/vlan/dot1q/dot1q_cfg.c [ 32760] Default [ 32768] DTL call failure adding intIfNum %s to vlan %d [ 32798] dtl failure reverting to default state for intIfNum %s [ 327d0] dtl request failure when deleting intIfNum %s [ 32800] Error accessing DOT1Q config data for interface %d in dot1qMapIntfIsConfigurable. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration. [ 328dc] Failures occurred in setting default VLAN configuration [ 32918] Error accessing DOT1Q config data for VLAN %d in dot1qVlanIsConfigurable [ 32964] Test VlanID %d [ 32978] ENTRY %d: [ 32984] --------- [ 32990] vlanId %d [ 3299c] name %s [ 329a8] staticEgressPorts [ 329bc] ----------------- [ 329d0] forbiddenEgressPorts [ 329e8] -------------------- [ 32a00] taggedSet [ 32a0c] ---------- [ 32a18] groupFilter.forwardAllMask [ 32a34] -------------------------- [ 32a50] Qglobal [ 32a5c] ------- [ 32a68] DefaultUserPriority = %d [ 32a84] NumTrafficClasses = %d [ 32aa0] Mapping : [ 32aac] %02X: [ 32ab9] Base internal VLAN: %u [ 32ad4] Ascending [ 32ae1] Internal VLAN policy: %s [ 32afc] VLAN Interface Mask [ 32b14] ------------------- [ 32b2c] ENTRY %d: %d/%d/%d [ 32b44] VID array: [ 32b54] acceptFrameType %d [ 32b6c] enableIngressFiltering %d [ 32b88] priority [ 32b94] Mapping : [ 32ba4] portCapabilities %d [ 32bbc] Descending [ 32bc8] %d.%d.%d, [ 32bd8] Bit %d unknown [ 32be8] %d, [ 32bf0] Scaling Constants [ 32c04] L7_DOT1Q_MAX_INTF - %d [ 32c1c] L7_MAX_VLANS - %d [ 32c30] dot1qCfg->checkSum : %u [ 32c4c] dot1qMsgQueue [ 32c5c] ../../../../src/application/switching/vlan/dot1q/dot1q_cnfgr.c [ 32c9c] dot1qInit: msgQueue creation error. [ 32cc4] dot1qTask [ 32cd0] Unable to initialize dot1s_task() [ 32cf4] Failed to create dot1q task [ 32d14] DOT1Q: Failed to put comamnd : %d configurator message in queue. [ 32d5f] t$DError creating Dot1q Semaphore [ 32d94] Error creating dot1qVlanCount Semaphore [ 32dc0] Error creating dot1qCfgRWlock semaphore [ 32dec] Unable to register for VLAN change callback! [ 32e1c] Assertion failed [ 32e30] DOT1Q: Unable to register with DTL [ 32e54] DOT1Q: Unable to register with NIM [ 32e78] dot1q.cfg [ 32e84] ../../../../src/application/switching/vlan/dot1q/dot1q_control.c [ 32ec8] Cannot update driver for interface vlan id %d [ 32efc] dtl failure when deleting ports from vlan id %d - portMask = %s [ 32f40] dtl failure when adding ports to vlan id %d - portMask = %s [ 32f80] dtl failure when deleting ports from tagged list for vlan id %d - portMask = %s [ 32fd4] dtl failure when adding ports to tagged list for vlan id %d - portMask = %s [ 33024] Problem updating transient data for VLAN %d [ 33054] Invalid interface %s [ 3306c] dot1qTask: unsuccessful return code on receive from dot1qMsgQueue: %08x [ 330b8] Unable to send message %d to dot1qMsgQueue for vlan %d - %d msgs in queue [ 33104] Unknown Event %d received [ 33123] X،جؼȀ4\̀t,@TdxڈڠڴĀ؀ <Txۘ۰Ātrace not set for %x [ 331b8] dot1qVlanCreateVlan : vlan %d fdbId %d requestor %d [ 331f0] Unable to apply VLAN creation request for VLAN ID %d [ 33228] Attempt to create a vlan (%d) that already exists [ 3325c] Problem updating data for VLAN %d [ 33280] DTL call to create VLAN %d failed with rc %d [ 332b0] Problem unrolling data for VLAN %d [ 332d4] Error pointing to DOT1Q config data for VLAN %d [ 33308] Attempt to create a vlan with an invalid vlan id %d. This accommodates for reserved vlan ids. i.e. 4094 - x. [ 33378] dot1qVlanDelete : vlan %d requestor %d [ 333a4] Problem deleting data for VLAN %d [ 333c8] VLAN Delete Call failed in driver for vlan %d [ 333f8] Not valid permision to delete the VLAN %d requestor %d [ 33430] Deleting the default VLAN. Typically encountered during clear Vlan and clear config [ 33484] VLan %d does not exist [ 334a0] Cannot configure VLAN membership for an access port %d [ 334d8] Error handling membership setting for dual mode Interface: %s [ 33518] Cannot get first valid NIM Interface number [ 33548] Dynamic entry %d can only be modified after it is converted to static. If this vlan is a learnt via GVRP then we cannot modify its member set via management. [ 335e8] dot1qVlanMemberSetModify : vlan %d intifNum %d mode %d requestor %d [ 33630] Untagged [ 3363c] Error handling tagmode(%s) setting for dual mode Interface: %s [ 3367c] Tagged [ 33684] Cannot configure VLAN tagging for an access port %d [ 336b8] Dynamic entry %d can only be modified after it is converted to static [ 33700] Error handling tagmode(%s) setting for dual mode [ 33734] dtl request failure when deleting intIfNum %s [ 33764] Only Dynamically created vlans can be converted [ 33798] Cannot find vlan %d to delete [ 337b8] dtl request failure when modifying tagging for intIfNum %s [ 337f8] Cannot modify tagging for port %s for vlan %d as this port is not a member of the vlan [ 33850] Cannot modify tagging of interface %s to non existance vlan %d [ 33890] dtl request failure when modifying vlan membership of intIfNum %s [ 338d4] Cannot modify membership of interface %s to non existance vlan %d [ 33918] dot1qVlanCreateMaskProcess : vlan %d [ 33940] Not valid permision to delete the VLAN %d [ 3396c] Deleting the default VLAN [ 33988] Vlan %d does not exist [ 339a4] dot1qVlanDeleteMask [ 339b8] Attempt to set access vlan with an invalid vlan id %d [ 339f0] Attempt to set access vlan with (%d) that does not exist [ 33a2c] Incorrect mode entered [ 33a49] List of dot1qDebug... functions -> [ 33a70] dot1qDebugMsgQueue() - Display the number of messages in the VLAN message queue [ 33ac4] dot1qDebugTraceModeGet() - Get the tracing mode [ 33af8] dot1qDebugTraceModeSet(mode) - Set the tracing mode: 1= enable, 0 = disable [ 33b48] dot1qDebugConsoleTraceModeGet() - Get the console tracing mode [ 33b88] dot1qDebugConsoleTraceModeSet() - Set the console tracing mode: 1= enable, 0 = disable [ 33be0] Dot1q Messages in queue : %d [ 33c08] Dot1q Max Messages in queue : %d [ 33c30] Event %s num messages %d [ 33c4c] Invalid value specified (%u) [ 33c6c] Unknwon event [ 33c7c] dot1q_first_Event [ 33c90] dot1q_vlan_create_static [ 33cac] dot1q_vlan_delete_static [ 33cc8] dot1q_vlan_create_dynamic [ 33ce4] dot1q_vlan_delete_dynamic [ 33d00] dot1q_vlan_tagged_set_static [ 33d20] dot1q_vlan_tagged_set_static_mask [ 33d44] dot1q_vlan_member_set [ 33d5c] dot1q_vlan_member_set_static_mask [ 33d80] dot1q_vlan_tagged_set_dynamic [ 33da0] dot1q_vlan_dynamic_to_static_set [ 33dc4] dot1q_qports_vid_set [ 33ddc] dot1q_qports_default_user_prio_set [ 33e00] dot1q_qports_default_user_prio_global_set [ 33e2c] dot1q_qports_ingress_filter_set [ 33e4c] dot1q_qports_traffic_classes_enabled_set [ 33e78] dot1q_qports_traffic_class_set [ 33e98] dot1q_qports_num_traffic_classes_set [ 33ec0] dot1q_qports_num_traffic_classes_global_set [ 33eec] dot1q_qports_traffic_class_global_set [ 33f14] dot1q_clear [ 33f20] dot1q_cnfgr [ 33f2c] dot1q_intfChange [ 33f40] dot1q_qports_vlan_membership_delta_mask_set [ 33f6c] dot1q_qports_vlan_tagging_delta_mask_set [ 33f98] dot1q_vlan_create_static_mask [ 33fb8] dot1q_vlan_delete_static_mask [ 33fd8] dot1q_last_event [ 33fed] 5h 5t 5 5 5 5 5 6 5 5Ȁ 6 5Ԁ 5 5 5 5 6 6 6 6( 64 6@ 6L 6X 6d 6p 6 6| 6 6 6 6 6 6 [ 34078] DOT1Q: %d.%03d sec: [ 34090] Dot1q Task Msg Sent [ 340a4] %s: dot1q_vlan_create_static: vlan = %d [ 340d0] ../../../../src/application/switching/vlan/dot1q/dot1q_debug.c [ 34110] %s: dot1q_vlan_delete_static: vlan %d [ 34138] %s: dot1q_vlan_create_dynamic: vlan %d [ 34160] %s: dot1q_vlan_delete_dynamic: vlan %d [ 34188] %s: dot1q_vlan_tagged_set_static: vlan %d, intIfNum %d, mode = %d [ 341cc] %s: dot1q_vlan_tagged_set_static_mask: vlan %d, mode %d [ 34208] %s 0x%.8x [ 34214] %s: dot1q_vlan_member_set: vlan %d, intIfNum %d, mode %d, Req %d [ 34258] %s: dot1q_vlan_member_set_static_mask: vlan %d, mode %d [ 34294] %s: dot1q_vlan_dynamic_to_static_set: vlan %d [ 342c4] %s: dot1q_qports_vid_set: vlan %d, intIfNum %d, mode %d [ 34300] %s: dot1q_qports_accept_frame_type_set: intIfNum %d, mode %d [ 34340] %s: dot1q_qports_default_user_prio_set: intIfNum %d, mode %d [ 34380] %s: dot1q_qports_default_user_prio_global_set: mode %d [ 343b8] %s: dot1q_qports_ingress_filter_set: intIfNum %d, mode %d [ 343f4] %s: dot1q_qports_traffic_classes_enabled_set: mode %d [ 3442c] %s: dot1q_qports_traffic_class_set: intIfNum %d [ 34460] %s: dot1q_qports_num_traffic_classes_set: intIfNum %d, mode %d [ 344a4] %s: dot1q_qports_num_traffic_classes_global_set: mode %d [ 344e0] %s: dot1q_qports_traffic_class_global_set [ 3450c] %s: dot1q_clear: [ 34520] %s: dot1q_cnfgr: command %d, type %d, correlator %d [ 34558] %s: dot1q_intfChange: intIfNum %d, event %d [ 34588] %s:dot1q_queueSynchronize: vlan %d [ 345ac] %s:dot1q_qports_vlan_membership_delta_mask_set: interface %d [ 345ec] %s:dot1q_qports_vlan_tagging_delta_mask_set: interface %d [ 34628] %s: Unknown Event %d received [ 34648] %s: dot1q_vlan_create_static_mask: vlan = %d [ 34678] %s: dot1q_vlan_delete_static_mask: vlan = %d [ 346a8] Dot1q Task Msg Recv [ 346bd] 8@ 8 9l 9 :\ ; [ 346d5] EЀ ; < EЀ EЀ = = > ? ? ? @| @ Al A Bd B C\ C Dh D EX EЀ EЀ FH F %d [ 34744] Intf present in [ 34758] PVID : %d [ 34768] Acceptable Frame Type : %d [ 34788] Ingree Filtering : %d [ 347a4] ../../../../src/application/switching/vlan/dot1q/dot1q_intf.c [ 347e4] Failed to create VLAN %u. This VLAN ID is assigned internally to port-based routing interface %s. To release the VLAN ID, disable the routing interface. [ 34880] DOT1Q: dtl failed to create an interface for vlan %d [ 348b8] DOT1Q: Vlan Interface table is full. Cannot create interface for vlan %d [ 34904] vlan id %d cannot use index %d - already in use for vlan %d [ 34944] link down notification failed for vlan %d, intIfNum %s [ 3497c] delete notification failed for intIfNum %s [ 349a8] DOT1Q: dtl failed to delete an interface for intIfNum %s [ 349e4] Interface %s should not be in state %d [ 34a0c] nimIntfQuery failed for intIfNum %s in delete attempt [ 34a44] detach notification failed for intIfNum %s [ 34a70] nimIntfQuery failed for intIfNum %s [ 34a98] %s %s [ 34aa0] 802.1Q VLAN [ 34aac] %s %d [ 34ab4] VLAN- [ 34abc] Cannot get intfIndex for the vlan %d [ 34ae4] DOT1Q: failed to get the MAC address of vlan %d [ 34b18] DOT1Q: failed to create the interface for vlanId %d [ 34b50] DOT1Q: notification failed for event(%d), intf(%s), reason(%d) [ 34b90] dot1qNimEventCompletionCallback: intIfNum %s not valid [ 34bc8] dot1q vlan intIf state is not in CREATE_PENDING for intIfNum %s/vlanid %d [ 34c14] dot1qNimEventCompletionCallback: intIfNum = %s, nimEventIntfNotify failed [ 34c60] dot1qNimEventCompletionCallback: intIfNum = %s, vlanId %d check invalid [ 34cac] DOT1Q: dtl failed to delete an interface for intIfNum %s lan %d [ 34cf0] dot1q vlan intIf state is not VALID for intIfNum %s/ vlanId %d [ 34d30] dot1q vlan intIf link state cannot be determined for intIfNum %s/ vlanId %d [ 34d80] Unable to assign an internal VLAN ID to interface %s. The maxinum number of routing interfaces have already been created. [ 34dfc] Unable to assign an internal VLAN ID to interface %s. All VLAN IDs are already in use. [ 34e54] Assigning VLAN ID %u to port based routing interface %s. [ 34e91] %6s %10s [ 34e9c] VLAN ID [ 34ea4] Interface [ 34eb1] %6u %10s [ 34ec0] ../../../../src/application/switching/vlan/dot1q/dot1q_outcalls.c [ 34f04] VLAN registrar ID %d greater than L7_LAST_COMPONENT_ID [ 34f3c] Bad rc %d in vlanNotifyRegisteredUsers for registrar %d [ 34f78] N/A [ 34f7c] VLAN_ADD_NOTIFY [ 34f8c] VLAN_DELETE_PENDING_NOTIFY [ 34fa8] VLAN_DELETE_NOTIFY [ 34fbc] VLAN_ADD_PORT_NOTIFY [ 34fd4] VLAN_DELETE_PORT_NOTIFY [ 34fec] VLAN_START_TAGGING_PORT_NOTIFY [ 3500c] VLAN_STOP_TAGGING_PORT_NOTIFY [ 3502c] VLAN_INITIALIZED_NOTIFY [ 35044] VLAN_RESTORE_NOTIFY [ 35058] VLAN_PVID_CHANGE_NOTIFY [ 35071] j j jĀ jЀ j܀ j j k [ 35091] k k Vlan Event %s [ 350a8] %s took %d msec [ 350bc] Event Index has to be between 0 and %d inclusive. [ 350f0] Unable to set dot1d default priority (%u) on intIfNum %s [ 3512c] ../../../../src/application/switching/vlan/dot1q/dot1q_qports.c [ 3516c] Unable to set global dot1d default priority (%u) on intIfNum %s [ 351b0] Unable to set global dot1d number of traffic classes (%u) on intIfNum %s [ 351fc] Unable to set one or more dot1d port priority mappings on intIfNum %s [ 35244] dot1qProcessPortTrafficClassSet : intIfNum %d priority %d trafficClass %d [ 35290] Unable to set dot1d priority %u to traffic class %u on intIfNum %s [ 352d4] Unable to set global dot1d priority %u to traffic class %u on intIfNum %s [ 35320] failure getting pCfg for intIfNum %s [ 35348] Vlan acceptable fram type can only be configured for General port mode %d [ 35394] dtl failure while modifying ingress filter value to %d for intIfNum %s [ 353dc] dtl failure while modifying pvid configuration to %d for intIfNum %s and vid_type %d [ 35434] Vlan acceptable frame type can only be configured for General port mode %d [ 35480] dtl failure while modifying accpet frame type to %d for intIfNum %s [ 354c8] dtl failed applying port cfg: intIfNum %s: pvid = %d, acceptFrameType = %d, ingressFiltering = %d [ 3552c] ../../../../src/application/switching/spanning_tree/dot1s/dot1s_api.c [ 35574] Attempt to update hello time which is disallowed per IEEE 802.1Q-REV 2005 [ 355c1] ~ ~ ~   Dot1s registrar ID %u already registered [ 35604] Dot1s registrar ID %u greater than Last Component ID [ 3563c] Received a vlan callback while outside the EXECUTE state [ 35678] dot1sInstStateQueryCallback is deregistered [ 356a8] Root Guard cannot be enabled on interface %s with enabled Loop Guard [ 356f0] Loop Guard cannot be enabled on interface %s with enabled Root Guard [ 35738] Cannot get first valid NIM Interface number [ 35768] dot1s.cfg [ 35774] Error on call to sysapiCfgFileWrite routine on config file %s [ 357b4] ../../../../src/application/switching/spanning_tree/dot1s/dot1s_cfg.c [ 357fc] dot1sSave deregistered [ 35814] %02X-%02X-%02X-%02X-%02X-%02X [ 35835] ` Ѐ  < `Error on call to osapiFsWrite routine on config file %s [ 35890] Unable to create dot1s task semaphore() [ 358bc] dot1s_queue [ 358c8] dot1s_timer_queue [ 358dc] dot1sInit: msgQueue creation error. [ 35904] dot1s_timer_task [ 35918] dot1s_task [ 35924] Unable to initialize dot1s_timer_task() [ 35950] Unable to initialize dot1s_task() [ 35974] dot1sInit: task creation error. [ 35998] dot1sInit: timer task creation error. [ 359c0] dot1s_debug.cfg [ 359d0] Error on call to sysapiSupportCfgFileWrite routine on config file %s [ 35a18] ../../../../src/application/switching/spanning_tree/dot1s/dot1s_cnfgr.c [ 35a60] dot1s BPDU Bufs [ 35a70] %s: Error allocating large buffers [ 35a94] dot1sCnfgrInitPhase1Process [ 35ab0] %s: Error creating dot1sStateSetSema [ 35ad8] Unable to register for NIM Interface change callback! [ 35b10] Unable to register for VLAN change callback! [ 35b40] Unable to register for dot1s state callback with DTL! [ 35b78] Unable to register for dot1s state callback with Sysnet! [ 35bb4] dot1s.cfg [ 35bc1] t P ܀ ܀ [ 35bd9]  [ 35be1]       [ 35bfd] [ 35c01] [ 35c05] [ 35c09] l [ 35c11] [ 35c15] l [ 35c1d] [ 35c21] [ 35c25] [ 35c29] [ 35c2d] [ 35c31] [ 35c35] l [ 35c3d] [ 35c41] [ 35c45] [ 35c49] [ 35c4d] [ 35c51] [ 35c55] [ 35c59] [ 35c5d] [ 35c61] [ 35c65] [ 35c69] l [ 35c71] [ 35c75] [ 35c79] [ 35c7d] [ 35c81] [ 35c85] [ 35c89] [ 35c8d] [ 35c91] [ 35c95] [ 35c99] l [ 35ca1] [ 35ca5] [ 35ca9] [ 35cad] [ 35cb1] [ 35cb5] [ 35cb9] [ 35cbd] [ 35cc1] [ 35cc5] [ 35cc9] l [ 35cd1] [ 35cd5] [ 35cd9] [ 35cdd] [ 35ce1] [ 35ce5] [ 35ce9] [ 35ced] [ 35cf1] [ 35cf5] [ 35cf9] l l [ 35d05] [ 35d09] [ 35d0d] l [ 35d15] [ 35d19] [ 35d1d] [ 35d21] [ 35d25] l [ 35d2d] [ 35d31] [ 35d35] [ 35d39] [ 35d3d] [ 35d41] [ 35d45] [ 35d49] [ 35d4d] l [ 35d55] [ 35d59] [ 35d5d] [ 35d61] [ 35d65] [ 35d69] [ 35d6d] l [ 35d75] [ 35d79] [ 35d7d] [ 35d81] [ 35d85] l [ 35d8d] [ 35d91] [ 35d95] [ 35d99] [ 35d9d] [ 35da1] l l l l l < < < < < l l [ 35dd9] [ 35ddd] [ 35de1] [ 35de5] [ 35de9] < < l < < < < < < < < l < < < < < < P P P P l [ 35e49] [ 35e4d] < < < < < [ 35e65] l d l t < Error! current time cannot be less than time when msg entered the queue.Curr Time:%u Timestamp:%u [ 35edd]        D D D D D D D D D D D D D D D D D D Ԁ   D D $ 4 D T d | D Ȁ ؀  4 L D d d t Ȁ  ( D @ P ` t ̀ D D ( D L../../../../src/application/switching/spanning_tree/dot1s/dot1s_control.c [ 361d4] Dot1s Msg Queue is full!!!!Event: %u, on interface: %u, for instance: %u. The message Queue is full. [ 3623c] Acc. IEEE 802.1Q-REV 2005 updating hello time is disallowed [ 3627c] Failed to set BPDU Filter value for %s [ 362a4] Failed to set BPDU Guard value FLASE for %s [ 362d4] Failed to reset BPDU Filter value for %s [ 36300] dot1sUserInstanceCreate: Instance (%d) already present [ 36338] dot1sStateMachineRxBpdu(): Rcvd BPDU Discarded. The current conditions, like port is not enabled or we are currently not finished processing another BPDU on the same interface, does not allow us to process this BPDU. [ 36414] dot1sStateMachineRxBpdu(): Rcvd BPDU Discarded on unknown interface [ 3645c] Rcvd a vlan callback in incorrect state %d vlan %d event %d int %s [ 364a0] dot1sVlanChangeCallback is deregistered [ 364cc] Invalid intIfNum [ 364e0] Failed to set BPDU Guard value %d [ 36504] Failed to set BPDU Filter value %d for %s [ 36530] Failed to set BPDU Flood value %d for %s [ 3655c] Cannot get first valid NIM Interface number [ 3658c] dot1sDebugHelp [ 3659c] Help Menu for Dot1s [ 365b0] Available dot1s Debug commands: [ 365d4] ------------------------------- [ 365f8] void dot1sSmStates(L7_uint32 intIfNum, L7_uint32 instIndex) [ 36638] void dot1sSizesShow() [ 36650] void dot1sMsgQueue() [ 36668] void dot1sPortStates(L7_uint32 intIfNum) [ 36694] void dot1sPortDiscard(L7_uint32 intIfNum) [ 366c0] void dot1sPortParms(L7_uint32 intIfNum) [ 366ec] void dot1sMbufs() [ 36700] void dot1sIsVlanSet(L7_uint32 vlanId) [ 36728] void dot1sDebugVidListGet(L7_uint32 mstId) [ 36758] void dot1sDebugProto(L7_uint32 debugFlag) [ 36784] void dot1sDebugProtoDetail(L7_uint32 debugFlag) [ 367b8] void dot1sDebugStateChange(L7_uint32 debugFlag) [ 367ec] void dot1sDebugInstance(int debug, int instIndex) [ 36820] void dot1sDebugInstanceDetail(int debug, int instIndex) [ 3685c] void dot1sDebugFlagsSet(int debugFlag,int instIndex) [ 36894] void dot1sDebugFlagsHelp() [ 368b4] void dot1sDebugSMFlagsSet(int debugFlag, int instIndex) - Same as dot1sDebugFlagsSet,expect that it sets the third and fourth bytes for flags greater than 16. [ 3695c] void dot1sDebugPrintQueueTime() - Function to print the amount of time spent by the last 10 messages in the queue [ 369d4] void dot1sDebugPrintMsgProcTime() - Function to print the amount of time spent processing the last 10 messages received [ 36a50] Port Number : %d Instance Index: %d [ 36a78] Port Enabled : %d [ 36a8c] Instance Num %d inUse : %d [ 36aac] PIM State : %d [ 36abc] PRT State : %d [ 36acc] PST State : %d [ 36adc] TCM State : %d [ 36aec] PRS State : %d [ 36afc] PRX State : %d [ 36b0c] PTX State : %d [ 36b1c] PPM State : %d [ 36b2c] BDM State : %d [ 36b40] STP State of Port = %d [ 36b58] Port Role = %d [ 36b68] Port Selected Role = %d [ 36b84] DOT1S Data Structures: [ 36ba0] ---------------------- [ 36bbc] sizeof dot1sBridge = %d [ 36bd8] sizeof DOT1S_INSTANCE_INFO_t = %d [ 36bfc] sizeof dot1sInstance = %d [ 36c18] sizeof DOT1S_PORT_COMMON_t = %d [ 36c3c] sizeof dot1sPort = %d [ 36c54] sizeof DOT1S_PORT_COMMON_CFG_t = %d [ 36c7c] sizeof dot1sCfgPort = %d [ 36c98] sizeof L7_MAX_INTERFACE_COUNT = %d [ 36cc0] sizeof DOT1S_INSTANCE_MAP_t = %d [ 36ce4] sizeof dot1sInstanceMap = %d [ 36d04] sizeof DOT1S_INST_VLAN_MAP_t = %d [ 36d28] sizeof dot1sInstVlanMap = %d [ 36d48] sizeof L7_DOT1Q_MAX_VLAN_ID+2 = %d [ 36d70] sizeof dot1sCfg_t = %d [ 36d8c] Dot1s Messages in queue : %d [ 36dac] Dot1s Timer Messages in queue : %d [ 36dd0] Enabled [ 36dd8] dot1sBridge.Mode = %s [ 36df0] dot1sBridge.enabledPortCount = %x [ 36e14] nim Admin State = FAILED TO GET [ 36e38] .portNum = %d [ 36e48] Disabled [ 36e54] nim Admin State = %s [ 36e70] Disable [ 36e78] Enable [ 36e80] .portAdminMode = %s [ 36e98] False [ 36ea0] True [ 36ea8] .portEnabled = %s [ 36ebc] .portLinkState = %x [ 36ed4] .ignoreLinkStateChanges = %s [ 36ef4] .notParticipating = %s [ 36f10] .adminEdge = %s [ 36f24] .operEdge = %s [ 36f38] Port Number : %d BPDU Rx Discards: %d [ 36f60] Port Number : %d BPDU Tx Discards: %d [ 36f88] Port Number : %d [ 36f9c] Port infoInternal: %d [ 36fb4] Port rcvdInternal: %d [ 36fcc] Port rcvdMSTP: %d [ 36fe0] Port rcvdRSTP: %d [ 36ff4] Port rcvdSTP: %d [ 37008] Port sendRSTP: %d [ 3701c] Port loopGuard: %d [ 37030] Port loopInconsistent: %d [ 3704c] Instance Index: %d [ 37060] Instance infoIs: %d [ 37078] Instance rcvdInfo: %d [ 37090] Instance rcvdMsg: %d [ 370a8] Instance reselect: %d [ 370c0] Instance selected: %d [ 370d8] Instance updtInfo: %d [ 370f0] Instance agree: %d [ 37104] Instance agreed: %d [ 3711c] Instance changedMaster: %d [ 37138] Instance proposed: %d [ 37150] Instance proposing: %d [ 37168] Instance sync: %d [ 3717c] Instance synced: %d [ 37194] Free Mbufs: %d [ 371a4] VLANID %u is Set in the mask [ 371c4] VLANID %u is NOT Set in the mask [ 371e8] MSTID %u has %u vlans associated [ 3720c] VLANID %u [ 37218] Flag positions in the Mask [ 37234] %d DOT1S_DEBUG_PROTO_HANDSHAKE [ 37254] %d DOT1S_DEBUG_PROTO_ROLE [ 37270] %d DOT1S_DEBUG_PROTO_DISPUTE [ 37290] %d DOT1S_DEBUG_PROTO_SYNC [ 372ac] %d DOT1S_DEBUG_RCVD_BPDU [ 372c8] %d DOT1S_DEBUG_RCVD_FLAGS [ 372e4] %d DOT1S_DEBUG_RCVD_INTERNAL [ 37304] %d DOT1S_DEBUG_RCVD_INFO [ 37320] %d DOT1S_DEBUG_RCVD_INFO_DETAIL [ 37344] %d DOT1S_DEBUG_TIMER_EXPIRY [ 37364] %d DOT1S_DEBUG_TIMER_EXPIRY_DETAIL [ 37388] %d DOT1S_DEBUG_RCVD_TC [ 373a0] %d DOT1S_DEBUG_DETECTED_TC [ 373bc] %d DOT1S_DEBUG_FLUSH [ 373d4] %d DOT1S_DEBUG_STATE_CHANGE [ 373f4] %d DOT1S_DEBUG_DESIG_PRT [ 37410] %d DOT1S_DEBUG_ROOT_PRT [ 3742c] %d DOT1S_DEBUG_MASTER_PRT [ 37448] %d DOT1S_DEBUG_ALTBKUP_PRT [ 37464] %d DOT1S_DEBUG_PIM [ 37478] %d DOT1S_DEBUG_BDM [ 3748c] %d DOT1S_DEBUG_PPM [ 374a0] %d DOT1S_DEBUG_STATE_MACHINE [ 374c0] %d DOT1S_DEBUG_MSG_PROC_TIME [ 374e0] This flag records the time spent by the last 10 messages in the dot1s queue and the time taken to process the last 10 BPDUs recieved. [ 37568] Note this flag is only operational for CIST instance [ 375a0] debug flag %x debug Instance is %d [ 375c8] %s : L7_TRUE [ 375d8] DOT1S_DEBUG_MSG_PROC_TIME [ 375f4] DOT1S_DEBUG_STATE_MACHINE [ 37610] DOT1S_DEBUG_PPM [ 37620] DOT1S_DEBUG_BDM [ 37630] DOT1S_DEBUG_PIM [ 37640] DOT1S_DEBUG_ALTBKUP_PRT [ 37658] DOT1S_DEBUG_MASTER_PRT [ 37670] DOT1S_DEBUG_ROOT_PRT [ 37688] DOT1S_DEBUG_DESIG_PRT [ 376a0] DOT1S_DEBUG_STATE_CHANGE [ 376bc] DOT1S_DEBUG_FLUSH [ 376d0] DOT1S_DEBUG_DETECTED_TC [ 376e8] DOT1S_DEBUG_RCVD_TC [ 376fc] DOT1S_DEBUG_TIMER_EXPIRY_DETAIL [ 3771c] DOT1S_DEBUG_TIMER_EXPIRY [ 37738] DOT1S_DEBUG_RCVD_INFO_DETAIL [ 37758] DOT1S_DEBUG_RCVD_INFO [ 37770] DOT1S_DEBUG_RCVD_INTERNAL [ 3778c] DOT1S_DEBUG_RCVD_FLAGS [ 377a4] DOT1S_DEBUG_RCVD_BPDU [ 377bc] DOT1S_DEBUG_PROTO_SYNC [ 377d4] DOT1S_DEBUG_PROTO_DISPUTE [ 377f0] DOT1S_DEBUG_PROTO_ROLE [ 37808] DOT1S_DEBUG_PROTO_HANDSHAKE [ 37824] %02X-%02X-%02X-%02X-%02X-%02X [ 37844] Built test config data [ 37860] dot1sBridge structure [ 37878] --------------------- [ 37890] cfgBridge = &dot1sCfg->cfg.dot1sBridge [ 378b8] cfgBridge->Mode = %d [ 378e8] cfgBridge->ForceVersion = %d [ 37918] cfgBridge->FwdDelay = %d [ 37948] cfgBridge->TxHoldCount = %d [ 37978] cfgBridge->MigrateTime = %d [ 379a8] cfgBridge->MaxHops = %d [ 379d8] cfgBridge->instanceCount = %d [ 37a08] cfgBridge->MstConfigId.formatSelector = %d [ 37a38] cfgBridge->MstConfigId.configName = %s [ 37a68] cfgBridge->MstConfigId.revLevel = %d [ 37a98] dot1sInstVlanMap structure [ 37ab4] -------------------------- [ 37ad0] Vlan ID %d ==> instanceNumber %d [ 37af4] ----------------------- [ 37b10] dot1sInstance structure [ 37b2c] dot1sInstanceMap structures [ 37b4c] --------------------------- [ 37b6c] dot1sCfg->cfg.dot1sInstanceMap[i].instNumber = %d [ 37ba0] dot1sCfg->cfg.dot1sInstanceMap[i].inUse = %d [ 37bd4] dot1sCfgPort structures [ 37bf0] dot1sInstance %d: [ 37c04] instance->cist.cistid = %d [ 37c38] instance->cist.BridgeIdentifier.priInstId = %d [ 37c6c] instance->cist.CistBridgeTimes.msgAge = %d [ 37ca4] instance->cist.CistBridgeTimes.bridgeMaxAge = %d [ 37cdc] instance->cist.CistBridgeTimes.bridgeFwdDelay = %d [ 37d14] instance->cist.CistBridgeTimes.bridgeHelloTime = %d [ 37d4c] instance->cist.CistBridgeTimes.maxHops = %d [ 37d84] msti[instIndex].mstid = %d [ 37db8] msti[instIndex].BridgeIdentifier.priInstId = %d [ 37df0] instance->msti[instIndex].MstiBridgeTimes.bridgeMaxHops = %d [ 37e30] INTERFACE %d/%d/%d: [ 37e48] portCfg->adminEdge = %d [ 37e68] portCfg->portAdminMode = %d [ 37e88] portCfg->HelloTime = %d [ 37ea8] Instance Info: [ 37ebc] Instance %d [ 37ecc] ExternalPortPathCost = %d [ 37eec] InternalPortPathCost = %d [ 37f08] autoInternalPortPathCost = %d [ 37f28] autoExternalPortPathCost = %d [ 37f48] portPriority = %d [ 37f68] Scaling Constants [ 37f7c] ----------------- [ 37f90] L7_MAX_MULTIPLE_STP_INSTANCES - %d [ 37fb4] L7_MAX_VLAN_ID - %d [ 37fcc] L7_DOT1S_MAX_INTERFACE_COUNT - %d [ 37ff0] DOT1S_MAX_CONFIG_NAME_SIZE - %d [ 38014] dot1sCfg->checkSum : %u [ 38030] dot1s.cfg [ 3803c] Error on call to sysapiCfgFileWrite routine on config file %s [ 3807c] ../../../../src/application/switching/spanning_tree/dot1s/dot1s_debug.c [ 380c4] Pkt RX - Intf:%d/%d/%d(%d), Source_Mac:%02x:%02x:%02x:%02x:%02x:%02x, Version:%d, Root_Mac:%02x:%02x:%02x:%02x:%02x:%02x, Root_Priority:0x%x Path_Cost:%d [ 38160] Pkt TX - Intf:%d/%d/%d(%d), Source_Mac:%02x:%02x:%02x:%02x:%02x:%02x, Version:%d, Root_Mac:%02x:%02x:%02x:%02x:%02x:%02x, Root_Priority:0x%x Path_Cost:%d [ 381fc] dot1s_debug.cfg [ 3820e] Time msg %d spent in dot1s queue : %u (msec) [ 3823e] Time taken to process BPDU %d : %u (msec) [ 3826c] DOT1S EVENTS TRACE [ 38280] DOT1S: unable to create the trace buffer [ 382ac] DOT1S: Cannot start dot1s events trace [ 382d8] Dot1s: unable to delete the event trace buffer [ 38308] dot1s_trace.txt [ 38318] ??????? [ 38320] DOT1S EVENTS [ 38330] %4lu: [ 3833c] %-12s: [ 38344] ts=%8.8u [ 38350] tid=0x%.8x [ 3835c] Depth=%3u [ 38368] Event=%3d [ 38374] Intf=%3u [ 38380] Instance Index=%2u [ 38394] %s [ 38398] %4lu: [ 383a0] %2.2x [ 383a8] - [ 383ae] Could not locate DAPI trace block for handle 0x%8.8x [ 383e4] ../../../../src/application/switching/spanning_tree/dot1s/dot1s_ih.c [ 3842c] Received a interface callback while outside the EXECUTE state [ 3846c] dot1sIntfCallback is deregistered [ 38490] Invalid intIfNum [ 384a5] ! t! H! !!(! ! ! [ 384c5] ! [ 384c9] ! 0! ! !,! !filename : %s [ 3ab68] pFileHdr->version : %u [ 3ab84] pFileHdr->componentID : %u [ 3aba0] pFileHdr->type : %u [ 3abbc] pFileHdr->length : %u [ 3abd8] pFileHdr->dataChanged : %u [ 3abf4] pFileHdr->savePointId : %u [ 3ac10] pFileHdr->targetDevice: %u [ 3ac2c] pFileHdr->pad[i] : %u [ 3ac4c] DOT3AD [ 3ac54] ===== [ 3ac5c] dot3adCfg.cfg.dot3adSystem.actorSysPriority = %x [ 3ac90] dot3adCfg->checkSum : %u [ 3acac] LAG ID %d Config Data [ 3acc4] ---------------------- [ 3acdc] agg->inuse = %x [ 3acf0] agg->ready = %x [ 3ad04] agg->aggId = %x [ 3ad18] agg->actorAdminAggKey = %x [ 3ad34] agg->individualAgg = %x [ 3ad50] agg->collectorMaxDelay = %x [ 3ad70] agg->adminMode = %x [ 3ad88] agg->partnerSys = [ 3ad9c] %0.2x: [ 3ada4] %0.2x [ 3adac] agg->partnerSysPri = %x [ 3adc8] agg->partnerOperAggKey = %x [ 3ade8] agg->partnerOperAggKey[%d] = %x [ 3ae0c] agg->currNumWaitSelectedMembers = %x [ 3ae34] agg->aggPortListUsp[%d]: usp = %x/%x/%x [ 3ae60] agg->name = %s [ 3ae74] agg->stpMode = %x [ 3ae88] agg->isStatic = %x [ 3ae9c] agg->hashMode = %x [ 3aeb0] intIfNum %x Config Data [ 3aecc] ----------------------- [ 3aee8] intf->lacpEnabled = %x [ 3af00] intf->actorAdminPortKey = %x [ 3af20] intf->actorPortNum = %x [ 3af3c] intf->actorPortPri = %x [ 3af58] intf->portIndividualAgg = %x [ 3af78] intf->actorAdminPortState = %x [ 3af98] intf->partnerAdminPortState = %x [ 3afbc] intf->actorPortWaitSelectedAggId = %x [ 3afe4] intf->partnerAdminSysPri = %x [ 3b004] intf->partnerAdminKey = %x [ 3b020] intf->partnerAdminPortNumber = %x [ 3b044] intf->partnerAdminPortPri = %x [ 3b065] Invalid port number. [ 3b07d] Port %d does not belong to a lag. [ 3b0a5] Error ! Lag not configured. [ 3b0c5] Port : %d [ 3b0d5] Error ! Lag is not static. [ 3b0f4] RxLACPDUsDropped : %d [ 3b10d] Number of Static Lags : %d [ 3b12d] Number of Dynamic Lags : %d [ 3b14c] dot3ad_debug.cfg [ 3b161] "M "N"N4"N"NDOT3AD: error sending message for cnfgr [ 3b1a0] ../../../../src/application/switching/link_aggregation/dot3ad_cnfgr.c [ 3b1e8] Dot3ad Bufs [ 3b1f4] dot3adPhaseOneInit: Error allocating buffers [ 3b224] Unable to create dot3ad task semaphore() [ 3b250] Unable to create dot3ad timer semaphore() [ 3b27c] Unable to create dot3ad Intf create semaphore() [ 3b2b0] dot3ad_timer_task [ 3b2c4] Unable to initialize dot3ad_timer_task() [ 3b2f0] dot3ad_lac_task [ 3b300] dot3adTrace [ 3b30c] DOT3AD: trace block not created [ 3b330] DOT3AD: trace block not enabled [ 3b354] Failed to create dot3ad tasks. [ 3b374] Unable to initialize dot3ad_lac_task() [ 3b39c] DOT3AD: Failed to register NV routines [ 3b3c4] DOT3AD: failed to register to NIM [ 3b3e8] DOT3AD: failed to register for PDUs [ 3b410] dot3ad.cfg [ 3b41c] DOT3AD: notification failed for event(%d), intf(%s), reason(%d) [ 3b460] ../../../../src/application/switching/link_aggregation/dot3ad_db.c [ 3b4a4] Interface to USP failure Port %s [ 3b4c8] dot3adDebugHelp [ 3b4d8] Help Menu for LACP [ 3b4ec] dot3adDebugLag(L7_uint32 lag_intf) [ 3b510] dot3adDebugNumOfLagsShow() [ 3b52c] dot3adDebugStaticLagIntfStatShow(L7_uint32 intIfNum) [ 3b564] dot3adDebugTimeoutSet(L7_uint32 intIfNum, L7_uint32 timeout, L7_uint32 actor) Send 0 for all interfaces Send 0 for Partner and non zero for Actor [ 3b5f8] dot3adDebugIntfStatePrint(L7_uint32 intIfNum) Send 0 for all interfaces [ 3b644] Use nimDebugPortTableShow to get mapping of usp to intIfNum [ 3b684] The traceCode used in devshell traceDump is %d [ 3b6b4] Lag Internal Interface Number: %u [ 3b6d8] isStatic: %u [ 3b6e8] Configured Member List: [ 3b704] %u, [ 3b70c] Active Member List: [ 3b724] Incorrect lag id! [ 3b738] LAG Id Range from %u to %u [ 3b754] All Physical interfaces Set to timeout %d.'0' is long '1' is short [ 3b798] Unknown Internal Interface number %d'0' is long '1' is short [ 3b7d8] Physical interface %d Set to Actor timeout %d.'0' is long '1' is short [ 3b820] Physical interface %d Set to Partner timeout %d.'0' is long '1' is short [ 3b86c] Port %d Actor Admin State: 0x%2x, Partner Admin State: 0x%2x Actor Oper State : 0x%2x, Partner Oper State: 0x%2x [ 3b8e0] Unknown port number %d [ 3b8f8] Port %d Actor Admin State: 0x%2x, Partner Admin State: 0x%2x Actor Oper State: 0x%2x, Partner Oper State: 0x%2x [ 3b96c] %02x.%02x.%02x.%02x.%02x.%02x [ 3b98c] Pkt RX - Intf: %d/%d/%d(%d), Port: %d, Sys: %s, Key: 0x%x [ 3b9c8] ../../../../src/application/switching/link_aggregation/dot3ad_debug.c [ 3ba10] LACP [ 3ba18] Pkt TX - Intf: %d/%d/%d(%d), Type: %s, Sys: %s, State: 0x%x, Key: 0x%x [ 3ba60] Marker Resp [ 3ba6c] Marker [ 3ba74] Unknown [ 3ba7c] dot3ad_debug.cfg [ 3ba91] "r"qt"q"r"qt"q"q"q"q"s,"q"q"sP"q"q"q"sh"q"q"q"q"q"q"q"q"q"q"q"q"q"q"q"q"sȀ"q"sdot3ad_queue [ 3bb30] ../../../../src/application/switching/link_aggregation/dot3ad_lac.c [ 3bb74] LAG: Unable to create msg queue for dot3ad_lac_task [ 3bbac] dot3ad_timer_queue [ 3bbc0] LAG: Unable to create msg queue for dot3ad_timer_task [ 3bbf9] "yT"yT"yT"y,"yT"yT"yT"yT"y [ 3bc1d] "y [ 3bc21] "yT"yT"yT"yT"y<"y<"yL"yT"yT"yT"yT""؀"" "D"hdot3adTimerTask: Failed to put msg in timer queue.... [ 3bc9d] aggStaticModeSet: Static to Dynamic:Failure to Send lacpPortEnabledLacpEnabled for configured port : %s [ 3bd09] aggStaticModeSet: Static to Dynamic:Failure to Send lacpPortEnabledLacpDisabled for configured port : %s [ 3bd75] aggStaticModeSet: Static to Dynamic: Failure to get linkstate for port %s [ 3bdc1] aggStaticModeSet: Static to Dynamic:Failure to Send lacpBegin for configured port : %s [ 3be1d] aggStaticModeSet: Dynamic to Static:Failure to Send lacpPortEnabledStaticLag for configured port : %s [ 3be89] aggStaticModeSet: Dynamic to Static: Failure to get linkstate for port %s [ 3bed5] aggStaticModeSet: Dynamic to Static:Failure to Send lacpBegin for configured port : %s [ 3bf31] aggStaticModeSet: Dynamic to Static: Failure sending lacpDisablePerMachine for active port : %s [ 3bf94] Invalid mode for static lags%s: %u! [ 3bfbc] %s %s [ 3bfc4] Link Aggregate [ 3bfd4] %d/%d [ 3bfdc] DOT3AD: failed to get the MAC address of LagID(%d) [ 3c010] DOT3ad: failed to create the interface [ 3c039] DOT3ad: Error in previous configuration stored. [ 3c06d] DOT3ad: Number of dynamic lags: %d exceeds maximum limit %d. [ 3c0ad] DOT3ad: Forcing Lag %d to be static. [ 3c0d4] %d/%d/%d [ 3c0e0] ../../../../src/application/switching/link_aggregation/dot3ad_lacp.c [ 3c128] received default event %x. Received a LAG PDU and the RX state machine is ignoring this LAGPDU [ 3c189] "nj"ǜ"̀"܀""Out of system buffers. [ 3c1b8] SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 3c1ec] ../../../../src/application/switching/link_aggregation/dot3ad_lacpm.c [ 3c234] dot3adPduReceive [ 3c248] dot3adLacpmTransmit [ 3c25c] %s: Port %d Member set is NULL [ 3c280] dtlDot1qConfigInterface [ 3c298] ../../../../src/dtl/switching/dtl_l2_dot1q.c [ 3c2c8] ../../../../src/dtl/switching/dtl_l2_dot1s.c [ 3c2f8] received invalid MSTP state [ 3c319] #%#&#& #%#& For instance %d adding VLAN %d [ 3c351] For instance %d removing VLAN %d [ 3c374] osapiMsgQueueGetNumMsgs, Error. [ 3c398] DTL MAX Queue Limit = %d, Current Size = %d [ 3c3c8] ../../../../src/dtl/switching/dtl_l2_fdb.c [ 3c3f4] invalid usp [ 3c405] #.#.X#.P#.X#.`#/ #/\#/T#/\#/d#0$#0`#0X#0`#0hExecuted %d transactions. [ 3c45c] ../../../../src/application/switching/filtering_db/fdb/fdb.c [ 3c49c] fdbDelete: received delete for unexpected FDB entry (%02X:%02X:%02X:%02X:%02X:%02X - %d). [ 3c4f8] fdb.cfg [ 3c500] Error on call to osapiFsWrite routine on config file %s [ 3c53c] fdb Task: Failed to create, exiting.... [ 3c568] Failure setting fid %d address aging timeout to %d. Unable to set the age time in the hardware [ 3c5c8] cur entries - %10d [ 3c5e0] max entries - %10d [ 3c5f8] total adds - %10d [ 3c610] total dels - %10d [ 3c628] dup adds - %10d [ 3c640] bad adds - %10d [ 3c658] bad dels - %10d [ 3c670] static entries - %10d [ 3c688] dynamic entries - %10d [ 3c6a0] internal entries - %10d [ 3c6bc] FDB: Unable to allocate resources [ 3c6e0] FDQ-Q [ 3c6e8] fdbTask [ 3c6f0] Failed to Create fdb Task. [ 3c70c] FDB: Unable to register to NVRAM routines [ 3c738] FDB: Unable to register to DTL for address changes [ 3c76c] FDB: Unable to register for VLAN change callback [ 3c7a0] FDB: Unable to register to NIM for port create [ 3c7d0] FDB:internal interface number %s has no mac address [ 3c808] FDB: Failed to delete fdb entry [ 3c82c] FDB: Could not get the VL Type [ 3c84c] Mirror: failed to get interface type for intIfNum %s on L7_ATTACH [ 3c890] FDB: Could not add fdb entry [ 3c8b0] Built test config data [ 3c8cc] Scaling Constants [ 3c8e0] ----------------- [ 3c8f4] L7_MAX_FILTERING_DATABASES - %d [ 3c918] fdbCfgData.checkSum : %u [ 3c934] FID = %d vlanId = %d addressAgingTimeOut = %d [ 3c96d] #Zx#[l#[#[#[INIT 0 [ 3c988] INIT 1 [ 3c990] INIT 2 [ 3c998] WMU [ 3c99c] INIT 3 [ 3c9a4] EXECUTE [ 3c9ac] UNCONFIG 1 [ 3c9b8] UNCONFIG 2 [ 3c9c5] O"ȀO"ЀO"؀O"O"O"O"O# [ 3c9e6] loop protection is transitioning from %s to %s [ 3ca18] loop_prot_queue [ 3ca28] ../../../../src/application/switching/loop_protect/loop_protect_cnfgr.c [ 3ca70] Failure creating loop protection rw lock. [ 3ca9c] Failure creating loop protection message queue. [ 3cacc] ERROR: Unable to create loop protection thread. [ 3cafc] loopProtectTask [ 3cb0c] loopProtectionAppStartTask: Unable to initialize loopProtectionAppTask [ 3cb54] loopProtectionAppStartTask: Could not create task loopProtectionAppStartTask [ 3cba4] loopProtectionApiCnfgrCommand: Failed to post message. [ 3cbdd] #e<#f$#fP#f#fFailed to allocate space for loop protection config [ 3cc28] Failed to allocate space for loop protection operational data [ 3cc68] Failed to allocate space for loopProtectMapTbl [ 3cc9a] loopProtectionCnfgrInitPhase1Process: Exit. [ 3ccca] loopProtectionCnfgrInitPhase1Process: Entry. [ 3ccf8] loopProtectionCnfgrInitPhase2Process: Unable to register with Nvram [ 3cd40] loopProtectionCnfgrInitPhase2Process: Unable to register with NIM [ 3cd84] loopProtectionPduReceive [ 3cda2] loopProtectionCnfgrInitPhase2Process: Exit. [ 3cdd2] loopProtectionCnfgrInitPhase2Process: Entry. [ 3ce02] loopProtectionCnfgrInitPhase3Process: Entry. [ 3ce30] loop_protect.cfg [ 3ce44] Failed to retrieve loop protection configuration [ 3ce78] Failed to apply loop protection configuration [ 3ceaa] loopProtectionCnfgrInitPhase3Process: Exit. [ 3ceda] loopProtectionCnfgrInitPhaseExecuteProcess: Entry. [ 3cf12] loopProtectionCnfgrInitPhaseExecuteProcess: Exit. [ 3cf46] loopProtectionCnfgrFiniPhase1Process: Exit. [ 3cf76] loopProtectionCnfgrFiniPhase1Process: Entry. [ 3cfa6] loopProtectionCnfgrFiniPhase3Process: Entry. [ 3cfd6] loopProtectionCnfgrFiniPhase3Process: Exit. [ 3d006] loopProtectionCnfgrNoopProcess: Entry. [ 3d032] loopProtectionCnfgrNoopProcess: Exit. [ 3d05a] loopProtectionCnfgrUconfigPhase2: Entry. [ 3d086] loopProtectionCnfgrUconfigPhase2: Exit. [ 3d0b0] Error [ 3d0b8] Warn [ 3d0c0] Verbose [ 3d0c8] API [ 3d0cc] Timer [ 3d0d4] Trace [ 3d0dc] ConfigTxRx [ 3d0e8] Log [ 3d0ec] Shutdown [ 3d0f8] Log and Shutdown [ 3d10c] loopProtectMsgCnfgr [ 3d120] loopProtectMsgMgmtAdminModeSet [ 3d140] loopProtectMsgMgmtTxTimerSet [ 3d160] loopProtectMsgMgmtDisableTimerSet [ 3d184] loopProtectMsgMgmtPortTxModeSet [ 3d1a4] loopProtectMsgMgmtPortAdminModeSet [ 3d1c8] loopProtectMsgMgmtPortActionSet [ 3d1e8] loopProtectMsgMgmtPortStatsClear [ 3d20c] loopProtectMsgMgmtPortAllStatsClear [ 3d230] loopProtectMsgIntfChange [ 3d24c] loopProtectMsgTimerTick [ 3d264] loopProtectMsgPduProcess [ 3d280] loopProtectMsgLast [ 3d294] %-20s = 0x%x = %d [ 3d2a8] loopProtectDebugLevel = 0x%x [ 3d2ca] ---------------------------------------------------------- [ 3d30a] Loop Protection Message Ids [ 3d336] %s [ 3d33e] Global Configuration data [ 3d364] Disabled [ 3d372] Global Admin Mode = %s [ 3d392] PDU Transmit interval = %d secs [ 3d3b6] Port Disable duration = %d secs [ 3d3de] Interface Configuration data [ 3d40a] Interface: %d - MapTbl index: %d [ 3d42c] Enabled [ 3d436] Admin Mode = %s [ 3d456] PDU Transmit Mode = %s [ 3d476] Action on loop = %s [ 3d494] True [ 3d49c] False [ 3d4a6] Filter Installed = %s [ 3d4c6] Operational data for interface = %d [ 3d4fa] Admin Mode = %s [ 3d522] PDU Transmit interval = %d secs [ 3d54e] Port Disable duration = %d secs [ 3d57a] PDU Transmit Mode = %s [ 3d5a2] Action on loop = %s [ 3d5c8] FALSE [ 3d5d2] Loop Presence = %s [ 3d5fa] Number of times loop detected = %d [ 3d622] Number of PDU's sent = %d [ 3d64a] Number of PDU's received = %d [ 3d670] TRUE [ 3d67a] ====================================== [ 3d6a6] DMAC : %02x:%02x:%02x:%02x:%02x:%02x [ 3d6d6] SMAC : %02x:%02x:%02x:%02x:%02x:%02x [ 3d706] EtherType : %04x [ 3d71e] Protocol Id : %02x:%02x:%02x:%02x:%02x [ 3d74a] Version : %02x [ 3d762] Interface : %04x [ 3d77a] TimeStamp : %08x [ 3d792] Base MAC : %02x:%02x:%02x:%02x:%02x:%02x [ 3d7c2] ====================================== [ 3d7ee] loopProtectionPduReceive: Invalid interface: %d [ 3d820] ../../../../src/application/switching/loop_protect/loop_protect_txrx.c [ 3d868] LOOP_PROTECTION : Is looped probably , since feature not enabled discarding the packet [ 3d8c6] loopProtectionPduReceive: Loop is detected on interface: %d, but is not loop protected [ 3d920] The Packet has failed crc check so discarding [ 3d956] loopProtectionPduReceive: Checksum Mismatch [ 3d984] LOOP_PROTECTION : Packet authentication failed : so discarding [ 3d9c8] LOOP_PROTECTION : Packet reached after timetolive expired : so discarding [ 3da16] loopProtectionPduReceive: Packet received %d seconds late [ 3da50] SYSAPI_NET_MBUF_FREE ERROR Line : %d Function : %s [ 3da86] loopProtectionPduReceive: Exit [ 3daa8] loopProtectionPduReceive [ 3dac4] LOOP_PROTECTION: Problem occured while placing the PDU in the msg Queue [ 3db12] Received packet on port %d.%d.%d [ 3db36] loopProtectionPduReceive: Entry [ 3db58] TRUE [ 3db60] emwebFormValueSet: null input vars 0x%lx 0x%lx [ 3db94] emwebFormValueSet: emwebStrdup failed [ 3dbc0] %s%s [ 3dbc8] deviceView.html [ 3dbdc] %c [ 3dbe0] ewaAlloc failure: %s [ 3dbf8] getsockopt: SO_SNDBUF = %d [ 3dc18] Can't read local socket address [ 3dc3c] emwebSockServer [ 3dc4c] Failed to bind port %d retry %d [ 3dc70] %s: listen failed: %s [ 3dc88] %s: bind failed: %s [ 3dca0] %s: setsockopt LINGER failed %s [ 3dcc4] http setsockopt SO_SNDBUF failed: %s [ 3dcec] http setsockopt SO_RCVBUF failed: %s [ 3dd14] %s: setsockopt REUSEADDR failed: %s [ 3dd3c] %s: socket() call failed: %s [ 3dd5c] invalid emweb index [ 3dd70] current EMWEB_STRING/INCLUDE code did not return [ 3dda4] TRUE [ 3ddac] %s [ 3ddb0] Configuration file [ 3ddc4] File [ 3ddcc] SSL PEM file [ 3dddc] %s %s %s [ 3dde8] %s [ 3ddec] File transfer [ 3ddfc] upload through [ 3de0c] HTTP [ 3de14] download through [ 3de28] TFTP [ 3de30] Code [ 3de38] Status: File Transfer is starting. [ 3de7c] Error! File Transfer failed. [ 3debc] Error! File Transfer failed. Invalid file type. [ 3df0c] Status: Updating configuration. [ 3df4c] Error! File Transfer failed. Invalid config file. [ 3dfa0] Status: Writing to flash. [ 3dfdc] Error! File Transfer failed. Flash failure. [ 3e028] Status: Checking for CRC errors. [ 3e06c] Error! File Transfer failed. Check sum is invalid in the file received [ 3e0d4] Error! File Transfer failed. Unknown direction. [ 3e124] File Transfer is completed successfully. [ 3e170] Error! File Transfer has failed. [ 3e1b4] Error! File Transfer failed. The received code file is not supported on this platform. [ 3e22c] Error! File Transfer failed. Enough memory is not available to perform the necessary operation. [ 3e2ac] Error! File Transfer failed. Error encountered while opening file intended to be uploaded. [ 3e328] Error! File Transfer failed. Error encountered while reading file contents from flash. [ 3e3a0] Error! File Transfer failed. File may be empty or does not exists. [ 3e404] Error! File Transfer failed. File size is bigger than maximum size supported. [ 3e474] Error! File Transfer failed. Error encountered while writing file contents to flash. [ 3e4ed] ####T###Ȁ###H#T#`#l#x##0#T##<#h#####Ȁ#Ԁ#### ##0#@#L#\#####$#|#X#$#T##0#<#H#\##p######Ā#̀#Ԁ#܀####(#4#h#t#########Ā#Ԁ######$#,#4#<#D#L#T#\#d#l#x##########T###؀#T#######0#$#0#@#H#P#X#h#p#|########̀#؀######(#4#@#L#X#d#p#|######Ā#Ѐ#܀######,#4#H#h#T#h#p####̀# [ 3e795] # ##$#0#<#H##T## [ 3e7bd] # ###(#8#D#Ԁ#L#X#h#h#t#|######Ā#Ѐ#܀### [ 3e81d] #4#@#L#X#l#########̀##@#L#X#d#p#####Ȁ#Ԁ#######(#4#@#L#X#d#p#|######Ā#Ѐ#܀### [ 3e8e9] # ##$#0#<#H#T#`#l#x#######̀#؀###### #,#8#D#P#\#h#t#######Ȁ#Ԁ#######(#4#@#L#X#d#p#|######Ā#Ѐ#܀### [ 3e9e9] # ##$#0#<#H#T######Ā#Ѐ#܀###(#4#@#L#X#x#####Ȁ#Ԁ#####$#0#<#H#T#`#h#p#x#########Ȁ#Ѐ#؀#### [ 3eacd] # ##$#0#<#D#L#X#d#p#|##4#T##@##T####T###Ę#T##Ĥ#p#T##|#(#T##4##T###ǘ#T##Ǥ#Ȑ#T##Ȝ#H#T##l#ɠ#Ԁ##<#H#T#`#l#x#ʄ#ʐ#ʜ#ʨ#ʴ##̀#؀######̸#,#H#d#̀#͜#͸#Ԁ## #(#D#`#|#Θ#δ#Ѐ###$hp_login.html [ 3ec54] /template.html [ 3ec64] v_1_1_1 [ 3ec6c] submit_flag [ 3ec78] BufferedLogs.html [ 3ec8c] submit_target [ 3ec9c] err_flag [ 3eca8] err_msg [ 3ecb0] clazz_information [ 3ecc4] Clear [ 3eccc] v_3_1_1 [ 3ecd4] v_1_2_1 [ 3ecdc] v_1_3_1 [ 3ece4] v_1_4_1 [ 3ecec] v_2_3_1 [ 3ecf4] v_2_1_1 [ 3ecfc] v_2_2_1 [ 3ed04] v_4_1_1 [ 3ed0c] v_4_2_1 [ 3ed14] v_4_3_1 [ 3ed1c] v_3_4_1 [ 3ed24] v_3_4_2 [ 3ed2c] v_3_4_3 [ 3ed34] v_3_5_1 [ 3ed3c] v_3_5_2 [ 3ed44] v_3_6_1 [ 3ed4c] v_3_6_2 [ 3ed54] v_3_6_3 [ 3ed5c] v_3_7_1 [ 3ed64] v_3_7_2 [ 3ed6c] v_3_8_1 [ 3ed74] v_3_9_1 [ 3ed7c] v_3_11_1 [ 3ed88] v_3_12_1 [ 3ed94] v_3_13_1 [ 3eda0] v_3_14_1 [ 3edac] v_3_14_2 [ 3edb8] v_3_15_1 [ 3edc4] v_3_16_1 [ 3edd0] v_3_17_1 [ 3eddc] v_3_18_1 [ 3ede8] v_3_18_2 [ 3edf4] v_3_19_1 [ 3ee00] v_3_20_1 [ 3ee0c] Clock_Detail.html [ 3ee20] v_2_2_2 [ 3ee28] FDBConfig13 [ 3ee34] v_1_3_2 [ 3ee3c] FDBConfig.html [ 3ee4c] Apply [ 3ee54] FDBSearch.html [ 3ee64] JumboFrames.html [ 3ee78] LLDPConfig21 [ 3ee88] v_2_1_2 [ 3ee90] v_2_1_3 [ 3ee98] v_2_1_4 [ 3eea0] v_2_1_5 [ 3eea8] LLDPConfig.html [ 3eeb8] LLDPLocalDeviceSumm21 [ 3eed0] v_2_1_6 [ 3eed8] LLDPLocalDeviceSumm.html [ 3eef4] LLDPRemoteDeviceSumm11 [ 3ef0c] v_1_1_7 [ 3ef14] v_1_1_2 [ 3ef1c] v_1_1_3 [ 3ef24] v_1_1_4 [ 3ef2c] v_1_1_11 [ 3ef38] v_1_1_5 [ 3ef40] v_1_1_9 [ 3ef48] v_1_1_12 [ 3ef54] v_1_1_6 [ 3ef5c] LLDPRemoteDeviceSumm12 [ 3ef74] v_1_2_2 [ 3ef7c] v_1_2_3 [ 3ef84] IPv4 [ 3ef8c] v_1_2_4 [ 3ef94] v_1_2_5 [ 3ef9c] LLDPRemoteDeviceSumm.html [ 3efb8] v_1_5_1 [ 3efc0] LLDPStats.html [ 3efd0] v_1_7_1 [ 3efd8] v_1_7_3 [ 3efe0] Logging.html [ 3eff0] v_1_6_1 [ 3eff8] v_1_6_2 [ 3f000] v_1_6_3 [ 3f008] Select [ 3f010] LoopProtectionCfg21 [ 3f024] LoopProtectionCfg.html [ 3f03c] v_3_2_1 [ 3f044] LoopProtectionStatus11 [ 3f05c] v_1_1_8 [ 3f064] LoopProtectionStatus.html [ 3f080] Network.html [ 3f090] v_3_3_1 [ 3f098] Ping.html [ 3f0a4] v_1_21_1 [ 3f0b0] v_1_31_1 [ 3f0bc] v_1_12_1 [ 3f0c8] v_1_8_1 [ 3f0d0] v_1_13_1 [ 3f0dc] v_1_15_1 [ 3f0e8] PortConfiguration.html [ 3f100] v_1_10_1 [ 3f10c] PortSummary11 [ 3f11c] v_1_1_21 [ 3f128] v_1_1_22 [ 3f134] v_3_1_2 [ 3f13c] PortSummary.html [ 3f150] ResetConfigToDefaults.html [ 3f16c] Reset Configuration [ 3f180] v_1_9_1 [ 3f188] v_1_11_1 [ 3f194] SNTP.html [ 3f1a0] v_1_12_4 [ 3f1ac] v_1_12_2 [ 3f1b8] v_1_8_3 [ 3f1c0] SSLCfg.html [ 3f1cc] Delete [ 3f1d4] v_1_8_2 [ 3f1dc] Download Certificates [ 3f1f4] Generate Certificate [ 3f20c] SaveAllChanges.html [ 3f220] Save Configuration [ 3f234] v_3_199_1 [ 3f240] v_3_298_1 [ 3f24c] v_3_10_1 [ 3f258] v_3_399_1 [ 3f264] v_3_498_1 [ 3f270] v_3_21_1 [ 3f27c] Summer_Time_Configuration.html [ 3f29c] v_7_1_1 [ 3f2a4] SwitchConfig.html [ 3f2b8] SysDescription.html [ 3f2cc] True [ 3f2d4] SystemReset.html [ 3f2e8] Reboot Switch [ 3f2f8] Time_Zone_Configuration.html [ 3f318] Disable [ 3f320] Add [ 3f324] TrunkConfig15 [ 3f334] v_1_5_2 [ 3f33c] v_1_5_5 [ 3f344] v_1_5_3 [ 3f34c] v_1_5_4 [ 3f354] v_1_5_6 [ 3f35c] v_1_5_7 [ 3f364] v_1_5_8 [ 3f36c] TrunkConfig.html [ 3f380] TrunkMembership23 [ 3f394] v_2_3_4 [ 3f39c] v_2_3_2 [ 3f3a4] v_2_3_3 [ 3f3ac] v_2_3_5 [ 3f3b4] v_2_3_6 [ 3f3bc] TrunkMembership.html [ 3f3d4] TrunkStatus.html [ 3f3e8] v_1_16_2 [ 3f3f4] v_1_14_1 [ 3f400] valMapImage1 [ 3f414] 1 [ 3f418] v_1_10_2 [ 3f424] UploadFile.html [ 3f434] Upload [ 3f43c] admin [ 3f444] UserAccounts.html [ 3f458] v_1_11_2 [ 3f464] VLANPortConfig.html [ 3f478] VLANPortParticipation23 [ 3f490] v_2_3_7 [ 3f498] v_2_3_8 [ 3f4a0] VLANPortParticipation.html [ 3f4bc] VlanCreateConfig13 [ 3f4d0] v_1_3_4 [ 3f4d8] v_1_3_3 [ 3f4e0] VlanCreateConfig.html [ 3f4f8] deviceView31 [ 3f508] v_3_1_4 [ 3f510] v_3_1_5 [ 3f518] v_3_1_6 [ 3f520] v_3_1_3 [ 3f528] v_5_1_1 [ 3f530] deviceView.html [ 3f540] Activate [ 3f54c] v_1_6_4 [ 3f554] dual_image_cfg.html [ 3f568] v_1_7_2 [ 3f570] dual_image_status11 [ 3f584] Image [ 3f58c] Version [ 3f594] Description [ 3f5a0] Image1 [ 3f5a8] Image2 [ 3f5b0] v_2_4_1 [ 3f5b8] v_2_4_2 [ 3f5c0] v_2_4_3 [ 3f5c8] dual_image_status.html [ 3f5e0] greenmode.html [ 3f5f0] pwd [ 3f5f4] Login [ 3f5fc] login [ 3f604] v_1_6_1_file_type [ 3f618] image [ 3f620] v_1_6_1_handle [ 3f630] http_file_download.html [ 3f648] Download [ 3f654] loginpage [ 3f660] locator.html [ 3f670] v_1_20_1 [ 3f67c] v_2_21_1 [ 3f688] v_2_6_1 [ 3f690] security.html [ 3f6a0] v_2_11_1 [ 3f6ac] Save As [ 3f6b4] v_200_1_1 [ 3f6c0] v_200_2_1 [ 3f6cc] v_21_5_1 [ 3f6d8] v_21_2_4 [ 3f6e4] v_21_2_2 [ 3f6f0] v_21_4_4 [ 3f6fc] v_21_4_2 [ 3f708] v_20_1_1 [ 3f714] v_19_1_1 [ 3f720] v_19_2_1 [ 3f72c] v_19_7_3 [ 3f738] v_19_3_1 [ 3f744] v_19_4_1 [ 3f750] v_19_5_1 [ 3f75c] v_5_2_1 [ 3f764] v_5_3_1 [ 3f76c] v_18_1_1 [ 3f778] v_8_3_1 [ 3f780] v_8_2_1 [ 3f788] v_9_4_1 [ 3f790] v_12_1_1 [ 3f79c] v_12_2_1 [ 3f7a8] v_12_3_1 [ 3f7b4] v_12_4_1 [ 3f7c0] v_12_5_1 [ 3f7cc] v_13_1_1 [ 3f7d8] v_13_2_1 [ 3f7e4] v_13_3_1 [ 3f7f0] v_13_4_1 [ 3f7fc] textBasedConfig141 [ 3f810] v_14_1_1 [ 3f81c] v_14_1_7 [ 3f828] v_14_1_2 [ 3f834] v_14_1_3 [ 3f840] v_14_1_4 [ 3f84c] v_14_1_11 [ 3f858] v_14_1_5 [ 3f864] v_14_1_9 [ 3f870] v_14_1_12 [ 3f87c] v_14_1_6 [ 3f888] textBasedConfig142 [ 3f89c] v_14_2_1 [ 3f8a8] v_14_2_2 [ 3f8b4] v_14_2_3 [ 3f8c0] v_14_2_4 [ 3f8cc] v_14_2_5 [ 3f8d8] v_15_1_1 [ 3f8e4] v_15_2_1 [ 3f8f0] v_15_2_2 [ 3f8fc] textBasedConfig153 [ 3f910] v_15_3_1 [ 3f91c] v_15_3_2 [ 3f928] textBasedConfig161 [ 3f93c] v_16_1_1 [ 3f948] v_16_1_3 [ 3f954] v_16_1_2 [ 3f960] v_16_1_4 [ 3f96c] v_16_1_5 [ 3f978] v_16_1_6 [ 3f984] v_16_1_7 [ 3f990] v_16_1_8 [ 3f99c] v_16_1_9 [ 3f9a8] textBasedConfig.html [ 3f9c0] v_17_1_1 [ 3f9ce] Current active connections are %d and max connections are %d [ 3fa10] ewSockFdSet: %d [ 3fa24] HTTPD: STOP %d [ 3fa38] HTTPD: START %d [ 3fa4c] ewmain: ADDR %lx: PORT %d [ 3fa68] Handle[] entries do not match ConnectionsActive [ 3fa9c] SELECT for activity timeout %d [ 3fac0] select timedout [ 3fad4] http connection request [ 3faf0] EmWeb: select() failed: %s [ 3fb10] ewsRun() failed: %d [ 3fb28] ../../../../src/xui/framework/src/emweb/posix/ewmain.c [ 3fb60] ewaInstallArchives() failed %d [ 3fb84] EmWeb: Handle table allocation failed [ 3fbac] ewaNewConnection: setting connection(%p)->context(%p) from return of ewsNetHTTPStart [ 3fc04] Open %p %d [ 3fc14] EmWeb: Handle table overflow @%d [ 3fc38] ewsNetHTTPStart() refused connection [ 3fc60] ewsNetHTTPStart() closesocket failed for socket= %d, errno=%d [ 3fca0] EmWeb socket accept() failed: %s [ 3fcc4] EmWeb: memory allocation failed @ %s:%d [ 3fcec] ewaNewConnection: accept failed %d [ 3fd14] accept failed [ 3fd24] %s: %s [ 3fd2c] NetReceiveLoop: read-ready seen on connection %d, socket %d [ 3fd6c] Reading from console [ 3fd84] ewsNetHTTPReceive() failed: %d [ 3fda8] remote closed connection [ 3fdc4] Read '0x%x' from console [ 3fde0] EmWeb: net buffer alloc failed @ %s:%d [ 3fe0c] ewaNetHTTPSend(%d, %p) [ 3fe28] xmit attempt %p %d [ 3fe40] TransmitPending(): data send on socket %d failed (errno=%d) [ 3fe80] connection dropped %p [ 3fe98] send on %d flow control on [ 3feb8] finally send sock %d failed %d retry %d size = %d [ 3fef0] send sock %d failed %d retry %d size = %d [ 3ff1c] TODO: Need to flush serial output [ 3ff40] ewaNetHTTPEnd: connection %p found in Handle[%d] [ 3ff74] ewaNetHTTPEnd: connection %d closing with pending data [ 3ffb0] ewaNetHTTPEnd: setting connection(%p)->context(%p) as part of shutdown [ 3fffc] ewaNetHTTPEnd: Close %p (fd %d) [ 40020] ewaNetHTTPEnd: Closed socket=%d,setConnectionsActive=%d [ 4005c] ewaNetHTTPEnd: closesocket() failed, errno=%d,set closePending=%d [ 400a0] ewaNetHTTPEnd: internal error - handle not in Handle table @ %s:%d [ 400e4] Web Server [ 400f0] ewsRun: Bad State - should be suspended: 0x%X [ 40120] ewsRun: bad context state: 0x%X [ 40145] ###h#退##餀#鼀##鼀#鼀#鼀##鼀#ewsSuspend(%p) [ 4018c] ewsSuspend: bad scheduling state [ 401b0] ewsSuspend: bad state [ 401c8] ewsResume(%p, %d) [ 401dc] ewsResume: bad scheduling state [ 40200] ewsResume: bad state [ 40218] ewsResume: No longer supports directly calling ewsRun. Please refer to the release notes for more information. [ 40288] ewsAuthRegister(%s, %p) [ 402a4] ewsAuthRegister: bad realm [ 402c0] ewsAuthRegister: bad scheme [ 402e0] ewsAuthRemove(%p) [ 402f4] ewsAuthChallenge(%p, %p) [ 40310] ewsAuthAuthenticate(0x%p, 0x%p) [ 40334] ewsAuthAuthenticate: bad setup substate [ 40360] ewsAuthRealmGet: no resources [ 40380] ewsContextIterations: not in string/include callout [ 403b8] ewsContextRepetition: not in string/include callout [ 403f0] %lu.%lu.%u%s [ 40400] ewsContextIterator: not in [ 4042c] ewsContextSendReply: query strings not supported [ 40460] ewsContextSendReply: document '%s' not found [ 40490] ewsContextSendReply: couldn't ServeInclude [ 404bc] 200 OK [ 404c8] ewsContextSendReply: no resources for new url [ 404fc] ewsContextSetFile( %p, %p ) [ 4051c] ewsContextSetFile: file param context field in use [ 40550] ewsContextSetFile: bad context state: 0x%X [ 4057c] ewsFileHashInsert(%u) [ 40594] ewsFileHashDelete(%u, %p) [ 405b0] ewsFileHashLookup(%u, %s) [ 405cc] ewsFileSetupFilesystemDoc: unclaimed dummy document context [ 4060c] ewsServeFindDocument: no resources for realm [ 4063c] ewFieldToUnsupported: EMWEB_TYPE unsupported [ 4066c] EMWEB_UNSUPPORTED [ 40681] #Ā##Ā### ############ ##$#$#8##܀#ewFormPointerMagic: no resources [ 40708] ewsFormSubmitSet: unknown name/value pair received [ 4073c] ewFieldFormUnsupported: EMWEB_TYPE unsupported [ 4076c] CHECKED [ 40774] ewFieldFormRadio: bad enum index [ 40798] SELECTED [ 407a4] - [ 407a8] . [ 407ac] ewFieldToDynamic: bad type %d [ 407cc] ewFieldToDynamic: type %d not configured [ 407f8] EMWEB_BAD_TYPE [ 40808] ewFieldFromUnsupported: EMWEB_TYPE unsupported [ 40838] 0123456789abcdefABCDEF [ 40850] handle [ 40858] File type = %s [ 40868] null [ 40870] filename [ 4087c] ewFieldFromFile: unknown header type. [ 408a4] ewBuildRepeatForm: repeates exceeds maximum [ 408d4] ewsField2Rendering: bad type %d [ 408f9] $+$+Ȁ$+$+$+$+x$+$+$+Ȁ$+Ȁ$+$+Ȁ$+Ȁ$+$+Ȁ$+Ȁ$+Ȁ$+Ȁ$+Ȁ$+Ȁ$+$+$+ewsRendering2Field: bad code %d [ 40979] $,,$,<$,D$,L$,T$,\$,d$,l$,t$,|$,$,ewsNetHTTPStart(%p) [ 409c0] ewsNetHTTPStart: no resources for context [ 409ec] ewsNetHTTPAbort(%p) [ 40a04] ewsNetHTTPReceive(%p, %p) [ 40a20] ewsNetHTTPReceive recvBufCount=%d [ 40a44] ewsNetHTTPReceive:recvBufCnt=%d exceeds MAX_QUEUED_RECV_BUFS=%d,abort ! [ 40a90] ewsInternalAbort(%p) [ 40aac] Date [ 40ab4] Pragma [ 40abc] Authorization [ 40acc] From [ 40ad4] If-Modified-Since [ 40ae8] Referer [ 40af0] User-Agent [ 40afc] Content-Encoding [ 40b10] Content-Length [ 40b20] Content-Type [ 40b30] Expires [ 40b38] Last-Modified [ 40b48] Connection [ 40b54] Host [ 40b5c] Transfer-Encoding [ 40b70] Cookie [ 40b78] If-Match [ 40b84] If-None-Match [ 40b94] Accept-Language [ 40ba4] Negotiate [ 40bb0] Accept-Encoding [ 40bc0] Accept-Charset [ 40bd0] Accept [ 40bd8] Expect [ 40be0] Content-type [ 40bf0] Content-length [ 40c00] Content-disposition [ 40c14] Content-transfer-encoding [ 40c30] [ 40c38] GET [ 40c3c] [ 40c40] ? [ 40c4c] HTTP/ [ 40c54] POST [ 40c5c] HEAD [ 40c64] OPTIONS [ 40c6c] PUT [ 40c70] DELETE [ 40c78] [ 40c80] : [ 40c88] http [ 40c90] / [ 40c98] ewsParse: bad substate of ParseRequest [ 40cc0] ewsParse: CR or NL should be seen [ 40ce4] : [ 40cec] : [ 40cf0] ewsParse: bad substate of ParseHeaders [ 40d18] ewsParse: bad substate of ParsingForm [ 40d40] & [ 40d48] = [ 40d4c] ewsParse: bad state [ 40d65] $8($?D$F4$F4$C$F4$F4$E\$F4$F4$F4$Eh$F4$F`$8P$8$9$=$:,$:$=$>$>H$>$@$A$A$B<$?l$?$?Keep-Alive [ 40dec] close [ 40df4] chunked [ 40dfc] 100-continue [ 40e0d] $Hp$H$H$H$HȀ$I8$Id$I$H$H$I$I$J [ 40e41] $J$$JH$JlewsParseReleaseUnusedBuffers(%p, %d) [ 40e74] [ 40e7c] ; [ 40e84] ewsParseChunk: bad chunk state [ 40ea5] $L8$L|$L̀$Mx$M$N$L8ewsParseFormData: Internal error - form_parsep != req_str_end!! [ 40f04] ewsParseFormData: file write failed - error code: 0x%X [ 40f3c] ewsParseFormData: bad state [ 40f5d] $P8$Q$Q܀$Rp$S$T$Ux$V $V$V$Wname [ 40f90] ewsParseCookies: no resources for new cookie [ 40fc0] ? [ 40fc8] ? = [ 40fd0] = [ 40fd8] " [ 40fdc] ewsParseNegotiateHdr(%p) [ 40ff8] , [ 40ffc] ews_tcn: Found negotiate directive [%s] extension [%d] [ 41034] ewsParseNegotiateHdr: no resources for Negotiate: header directive [ 41078] ewsParseNegotiateHdr: no resources for Negotiate: header [ 410b4] ewsParseAcceptHdr(%p) [ 410cc] ,; [ 410d4] ews_tcn: Found Accept data [%s], quality [%s], extension [%d] [ 41114] ewsParseAcceptHdr: no resources for Accept: header data [ 41150] ewsParseAcceptHdr: no resources for Accept: header [ 41188] 201 Created [ 41196] 201 Created [ 411a4] 204 No Content [ 411b4] 304 Not Modified [ 411c8] 400 Bad Request [ 411da] 400 Bad Request [ 411ec] 401 Unauthorized [ 41202] 401 Unauthorized [ 41218] 404 Not Found [ 4122a] 404 Not Found [ 4123c] 405 Method Not Allowed [ 41256] 405 Method Not Allowed [ 41270] 412 Precondition Failed [ 4128a] 412 Precondition Failed [ 412a4] 417 Expectation Failed [ 412be] 417 Expectation Failed [ 412d8] 500 Internal Error [ 412ee] 500 Internal Error [ 41304] 501 Not Implemented [ 4131a] 501 Not Implemented [ 41330] 505 HTTP Version Not Supported [ 41352] 505 HTTP Version Not Supported [ 41374] ewsSendHeader(%p, %p, %s) [ 41390] HTTP/1.1 [ 4139c] [ 413a2] Server: [ 413ae] Connection: Keep-Alive [ 413ca] Connection: close [ 413de] Transfer-Encoding: chunked [ 413fe] Content-Length: [ 41412] Content-Type: [ 41424] ; charset= [ 41432] Content-Language: [ 4144a] Content-Encoding: [ 41462] Cache-Control: [ 41474] max-age=3600 [ 41484] no-cache [ 41490] , [ 41496] Content-Location: [ 414ae] TCN: choice [ 414be] TCN: list [ 414ce] Set-Cookie: [ 414dc] = [ 414e0] ;PATH= [ 414e8] ;SECURE [ 414f2] Pragma: no-cache [ 41504] private [ 4150c] public [ 41516] ETag: " [ 41520] " [ 41526] Content-Length: 0 [ 41538] ewsSendHeader: 401 url %s not found [ 41560] ewsSendStatusString: %s not found [ 41584] 302 Moved Temporarily [ 4159c] ewsSendRedirect: bad type %d [ 415bc] 303 See Other [ 415cc] Location: [ 415d8] https:// [ 415e4] http:// [ 415ee] Content-Type: text/html Content-Length: [ 41620] MovedMoved [ 4166c] 301 Moved Permanently [ 41684] HTTP/1.1 100 Continue [ 416a0] ewsFlush(%p) [ 416b0] no buffers or we haven't filled the first buffer yet [ 416e8] ewsFlush - aborted [ 416fc] ewsFlushAll(%p) [ 41710] ewsFlushAll - aborted [ 41728] :%lu [ 41730] ewsBodyUpdateChunkHeader: wrong state [ 41758] ewsBodyNewChunkHeader: wrong state [ 4177c] 00000000 [ 41788] ewsServeStart(%p) [ 4179c] /* [ 417a0] ewsServeStart: no resources for url [ 417c8] 200 OK [ 417d0] Public: HEAD, GET, POST, PUT, DELETE, OPTIONS [ 41804] * [ 41808] ewsServeFindDocument: unable to create document [ 4183c] ewsServeSetup(%p, %p) [ 41854] / [ 41858] ewsServeSetup: unknown document type [ 41880] 300 Multiple Choices [ 4189c] 200 OK [ 418a4] Allow: OPTIONS [ 418b4] Allow: HEAD, GET, OPTIONS [ 418d4] Allow: HEAD, GET, POST, OPTIONS [ 418f8] , HEAD, GET [ 41904] , POST [ 4190c] , PUT [ 41914] , DELETE [ 41928] ../../../../src/xui/framework/src/emweb/websrc/server/ews_serv.c [ 4196c] ewsServeSetup: calling ewsSendContinue from %s:%d [ 419a0] ewsServeSetup: unable to authenticate [ 419ca] digest auth requires HTTP 1.1 and up [ 419f4] ewsServeSetup: index wrong type [ 41a18] ewsServeSetup: index not found [ 41a38] ewsServeStart: no resources for doc context [ 41a68] ewsServeDocument(%p) [ 41a80] 0 [ 41a84] ewsServeDocument: no buffers [ 41aa4] ewsServeDocumentNode: current offset MUST be at a node!! [ 41ae0] ewsServeDocument: Unknown node type %d seen in %s at node_count %d, data offset %d. [ 41b38] ewsServeDocument: Do you have the right options turned on? [ 41b75] $$Ѐ$$$$$$$$ $ $4$4$$$H$$\$p$$$$$$$$ [ 41be0] ewsServeSetupForm: calling ewsSendContinue from %s:%d [ 41c18] ewsServeSetupForm: no form nodes [ 41c3c] ewsServeSetupForm: node not found [ 41c60] ewsServeSetupForm: bad form index [ 41c84] multipart/form-data [ 41c98] boundary [ 41ca4] ews_serv.c: this archive was compiled with the --archive-symbols option. The EmWeb/Server will be unable to process most in this archive. You must #define EW_CONFIG_OPTION_CONVERT_XML in ew_options.h to use this archive. [ 41d94] EMWEB_STRING: EMWEB_TYPE unsupported [ 41dbc] EMWEB_UNSUPPORTED [ 41dd0] ewsServeEmWebInclude: '%s' not found or wrong type [ 41e04] ewsServeEmWebInclude: no memory for new url [ 41e30] ewsServeEmWebInclude: no resources [ 41e55]