OK FF410040=87400040 FF410048=071041F4 

CFE-NTSW-5.0.3 for BCM953314R24GS (32bit,SP,BE,MIPS)
SP CFE Version: P.1.4 
Build Date: Mon Jun  8 13:47:19 IST 2009 (support@broadcom.com)
Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
Board : BCM953314R24GS
CPU type 0x29050: 200MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE:  0x80EB4000 - 0x80FFFF80 (1359744)
Initialized Data:          0x80EFB718 - 0x80EFC510 (3576)
BSS Area:                  0x80EFC510 - 0x80EFDF70 (6752)
Local Heap:                0x80EFDF80 - 0x80FFDF80 (1048576)
Stack Area:                0x80FFDF80 - 0x80FFFF80 (8192)
Text (code) segment:       0x80EB4000 - 0x80EFAE77 (290423)
Boot area (physical):      0x00E73000 - 0x00EB3000
Relocation Factor:         I:E12B4000 - D:E12B4000
Compression Supported:     7zip

MIPS is operating in SYNC mode


Loading image 2.
Loader:elf Filesys:raw Dev:flash0.os1 File: Options:(null)
Loading:  
Validating the code file.. 
Flash image is 1681886 bytes,  CRC 00004621
0x80041000/6284824 0x8063f618/849856 0xa0001000/262144 Entry at 0x80041000
Starting program at 0x80041000

16x5x SERIAL init - dev: b8000300.1
IFP: 0x8060953c, next: 0x8070eb10
IFP: 0x8070eb10, next: 0x00000000

RAM File System of older version is found! Restoring saved configuration...
SmartPATH software Version P.1.14 Build Date: Wed Nov 11 16:21:42 EST 2009
Starting fpmain 
...ICS unit 0: Dev 0xc312, Rev 0x11, Chip BCM53312_B0, Driver BCM53314_A0
Phy loopback test in progress ...
         Unit: 0 ... Success !
started!

SmartPATH Debug >syslog - Can't set SO_RCVBUF to 0 - errno 22